• Conservation Science in Museum
• /
• v.16
• /
• pp.82-95
• /
• 2015

Old Monk by Yun Duseo is realized to use silver paper which is made of rarity material. This sudy investigates reason why silver, that is easily discoloration in environmental condition, is susceptible in present. The method was the surface treatment materials and the base fiber through direct observation, optical instruments and XRF analysis. Based on these results, reproducing experiment was conducted to research materials in paper of Old Monk and the surface treatment technique. The results, the paper was treated 'Dochim' with a mineral having polygonal crystals for improving smoothness and density. XRF analysis result showed high calcium content, therefore, the paper was not used silver, it guess pulverized shells of abalone or other types of shellfish. Accordingly, the research was narrowed down to shells with shiny, reflective surfaces which at the same time contain high amounts of calcium. A new experiment was conducted using unprocessed abalone shells. Through the reproducing experiment, shellfish has high possibility as used mineral in paper. Notwithstanding, this experiment was unable to precisely reproduce the smoothness and shine of the original paper. Further research may therefore be needed.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.535-541
• /
• 2017

On the basis of 200 ppm of Ag and 120 l/h of feed flow rate, we built a pilot plant of an ion exchange fiber system having an double tube type ion exchange chamber with strong base ion exchange fiber (FIVAN A-6) which was designed to replace fibers easily and to eliminate the need for a fixture. The following results were obtained for the double tube type of ion exchange fiber system with an ion exchange capacity of 4.6 meq/g for Ag. The adsorption process was operated in the range of 40~90 l/h after confirming the effect of the flow rate and, pH did not affect formation of complex ion of Ag in the range of pH 7~12. In the case of backwash process, the recovery rate of Ag was tested in the range of 60~120 l/h and comparative experiments were carried out using NaOH, $NH_4Cl$, and NaCl as the chemicals for backwash. Although the desorption time was shortened at higher concentration, the desorption efficiency per mol was lowered. Therefore, it was confirmed that the desorption time and the concentration should be well balanced to operate economically. The desorption pattern of the backwash process is slower than the adsorption process and takes a lot of time. The results showed that the Ag adsorption ratio was 99.5% or more and the Ag recovery ratio was 96% or more, and commercialization was possible.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.105-119
• /
• 2014

With its growing awareness by public today, along with our heritage gaining higher standing - such as being listed as World Heritage - the needs for managing cultural heritage that meet global standard is required, and public's interest towards national heritage growing higher, Cultural Heritage Administration is actively pursuing related projects for scenic amenity that include systematic preserve/manage/restore the heritage including surrounding environment, also propose harmonious landscape. 1,834 cases of allowance limit for state-designated cultural heritage change are prepared as part of the plan, and the standards are being expanded actively towards designated cultural heritage across the country, contributing towards administrative efficiency and living conditions of the locals significantly. However, some definitions are unclear and possible complaints might arise when applied due to choice of the law, this research prepares the base material for efficient management of the establishment by diagnosing overall operational status and proposing alternatives towards the limit and improvements after reviewing the result. Through this, we expect to see establishment of policies for better management of cultural heritage and its scenic amenity via maximizing administrative efficiency, whilst positively enhance resident satisfaction around the heritage area as well as settling the regulations in short term.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.254-263
• /
• 2012

This study was performed to investigate a hospital nurses' knowledge and attitude about cancer pain management and to make use of base material for education. The research design was descriptive survey study, and the data were collected from 303 nurses who were working at a university hospital. A instrument study was the inventory consisting 107 questionnaires for cancer pain management. The data were analysed by SPSS WIN 18.0. The study showed that the percentage of correct answers for general knowledge about pain was 79.6%, for knowledge about cancer pain was 82.2%, for knowledge about analgesics use was 55.6%, for attitude about pain management was 65.2%, and the percentage of correct answers for each item was 70.7%. The knowledge about analgesics use was significant difference in age, education level, position, years of nursing practice, present place of working, years of present working place, pain education program experience, the attitude about pain management was significant difference in gender, education level and present place of working. Consequently it needs the persistent educational programs development and the clinical application to improve of nurses` knowledge and attitude about cancer pain management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.94-101
• /
• 2019

In this study, the FEM technique was applied to design the shape of the horn that transmits ultrasonic vibration energy to the base material, and the shape of the welding horn with a one-wavelength bar shape used in the 20kHz region was designed. The shape design of the horn was performed by applying the rod longitudinal vibration theory to Ansys APDL (Ansys Parametric Design Language). Twenty-five models were designed using the ratio of the area of the input and output surfaces of the vibration and the length of the horn to derive the appropriate horn shape. The horn was designed with a total length of 130mm, a step length of 65mm, and an output area of 28.79mm. The horn was fabricated using the optimized dimensions, and the vibration and displacement characteristics of the horn were evaluated using the measurement system. Finally, a uniform longitudinal step horn was designed, and more than 97.4% of the uniformity of the tip was secured. The amplitude ratio of the optimized horn was improved by 51%.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.2
• /
• pp.93-102
• /
• 2011

In this study, experiments on total digestion and sequential extraction were conducted in order to understand total metal contents, and mobility, bioavaliability and toxicity of metals in marine dredged sediment from Busan New Port. The total concentrations of arsenic and heavy metals in the dredged sediment were relatively low as follows: Al (2.36~2.96 wt.%), As (1.6~3.3 mg/kg), Ba (30.0~33.8 mg/kg), Cd (0.12~0.18 mg/kg), Cr (27.5~35.0 mg/kg), Cu (11.3~15.0 mg/kg), Fe (2.91~3.51 wt.%), Mn (324~408 mg/kg), Ni (18.8~23.8 mg/kg), Pb (23.8~31.3 mg/kg), and Zn (70.0~86.3 mg/kg). In addition, it was found that most of Al (87.5~95.9%), As (74.1~93.8%), Ba (71.8~77.6%), Cr (69.5~94.3%), Cu (50.0~78.7%), Fe (70.8~87.6%), Ni (64.5~75.3%), Pb (53.4~64.3%), and Zn (62.5~81.7%) existed in the residual fraction, meaning that those elements might come from natural sources. On the other hand, Cd and Mn were present mainly in the non-residual fraction. Due to low concentrations of toxic heavy metals and high percentage of residual fraction, it could be possible to reuse the dredged sediment for bricks, pavement base material, etc.

• International Journal of Highway Engineering
• /
• v.5 no.3 s.17
• /
• pp.31-42
• /
• 2003

The KHC Test Road project was initiated on 1991 to develop Korean Pavement Design Guide. It was constructed along the Joongbu Inland Expressway line between Yeoju and Gamgok. It is two-lane wide expressway containing fifteen asphalt and twenty-five Portland cement concrete test pavement sections. Various sensors were installed in the Test Road to evaluate the behavior of test pavement sections under the influence of traffic load and environmental change. The most important issues in the sensor installation are the accurate location and long-term survivability. They are directly influenced by the sensor installation methodology. The methodology for asphalt strain gages is mainly discussed in this paper because it is the second important sensors in the KHC Test Road project. In order to find the best methodology, we evaluated existing methodology from prior experience and several conducted test installations. We have tried mound, block out, and trench cuts since 2000. Among three methods, block out was the most effective one in terms of accurate location, long-term survivability, and material homogeneity. However, this method cannot be applied to the wearing coarse so that the mound method was used as an alternative. The block out method was applied to base and intermediate layers while the mound method was used to the wearing coarse. Three hundred seventy-four asphalt strain gauges were installed on asphalt pavement sections from September 3rd to November 18th in 2002. According to the sensor measurement evaluation, 6.3% of sensor demonstrated over ranged readings for mound method installation and 2.5% did for block out method installation. We lost only two sensors during the installation. It is 99.5% survival and it is excellent survival rate according to other experience.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.4
• /
• pp.268-274
• /
• 2015

Weld overlay was first used in power plants in the US in the early 1980s as an interim method of repairing the welds of flawed piping joints. Weld overlaid piping joints in nuclear power plants must be examined periodically using ultrasonic examination technology. Portable phased array ultrasonic technology has recently become available. Currently, the application of preemptive weld overlays as a mitigation technique and/as a method to improve the examination surface condition for more complex configurations is becoming more common. These complex geometries may require several focused conventional transducers for adequate inspection of the overlay, the original weld, and the base material. Alternatively, Phased array ultrasonic probes can be used to generate several inspection angles simultaneously at various focal depths to provide better and faster coverage than that possible by conventional methods. Thus, this technology can increase the speed of examinations, save costs, and reduce radiation exposure. In this paper, we explain the general sequence of the inspection of weld overlay and the results of signal analysis for some PAUT (phased array ultrasonic testing) signals detected in on-site inspections.

• Korean Journal of Head & Neck Oncology
• /
• v.15 no.1
• /
• pp.22-28
• /
• 1999

Purpose: We performed this study retrospectively to evaluate local control, survival, prognostic factors, and failure patterns in patients with non-Hodgkin's lymphoma of Waldeyer's ring. Materials and Methods: From April 1984 to November 1996,41 patients with non-Hodgkin's lymphoma of Waldeyer's ring were treated with combined chemotherapy and radiation therapy. Age was ranged from 19 to 73 years old with a median age of 55 years, and there were 26 male and 15 female patients. Primary site was tonsil in 26 and base of the tongue in 7 and nasopharynx in 8, and stage distribution showed stage I in 12 and stage II in 29 patients. Pathologic classification was done according to Working Formulation. There were 1 with follicular mixed small cleaved and large cell, 8 with diffuse small cleaved cell, 7 with diffuse mixed small and large cell, and 25 cases with diffuse large cell. All patients were treated with combination of chemotherapy and radiation therapy. Chemotherapy regimen consisted of either CHOP-Bleo(cyclophosphamide, adriamycin, vincristine, prednisolone, bleomycin) or COP-BLAM III(cyclophosphamide, vincristine, prednisolone, bleomycin, adriamycin, procarbazine). Radiation dose ranged from 3600cGy to 6620cGy with a median dose of 5040cGy. Follow-up time was ranged from 15 months to 159 months(median 55 months). Results: The complete response was achieved in 98%(40/41) and partial response in 2%(1/41). The complete response rate were the followings: 66.7% for stage I and 51.7% for stage II after chemotherapy, 100% for stage I and 96.6% for stage II after overall treatment respectively. The overall survival rate and disease-tree survival rates at 5 years were 82.6% and 79.5%, respectively. Prognostic factors for overall survival were age(p=0.007), stage(p=0.03), nodal status(p=0.006) and radiation dose(p=0.003). The factors associated with disease-tree survival were stage(p=0.04), nodal status(p=0.004) and radiation dose(p=0.009). The failure patterns were analized in evaluable 35 patients with complete response. Locoregional failure was noted in 2 patients and distant metastasis in 5 patients. Conclusion: Our results suggest that combined modality therapy is the appropriate treatment for stage I-II intermediate grade non-hodgkin's lymphoma of the Waldeyer's ring. However, our material is small and the analysis is retrospective. Randomized prospective studies for combined therapy, radiation therapy alone and chemotherapy alone are needed.

• The Journal of Korean Medical History
• /
• v.19 no.2
• /
• pp.67-85
• /
• 2006

As Lee Heon-gil's books have been handed down in oral tradition and written form, there are several different versions including the one edited by the author. Books known to be his writings include Eulmisinbang, Majinbang contained in Susangsingam, and Majinbang, Majingibang and Majinbibang mentioned in Joseoneukhaksageupjilbyeongsa. Among Lee Heon-gil's books, Eulmisinbang was mentioned first in literature. Its original version is missing, but a large part of it is quoted in Magwahoitong, through which we can see the contents of Eulmisinbang. The meanings of Eulmisinbang are as follows. First, it is the most reliable woodblock-printed version as it was the base of Magwahoitong. Second, quotations in Magwahoitong are so accurate that they demonstrate the original texts of Eulmisinbang and can be used in comparison with other versions. Third, Eulmisinbang has the largest volume of contents among Lee Heon-gil's books. Susangsingam was printed again in the early 1900s by combing Majinbang and Sanbangsurok. Majinbang included in the book had been known to come from China but, through comparison with the original, it was found to be the same as Eulmisinbang. Majinbang is considered to be Eulmisinbang handed down in different name, and shows the original structure of Eulmisinbang. Considering its table of contents and the contents, Majinbang mentioned in Joseoneukhaksageupjilbyeongsa looks the same as Majinbang included in Susangsingam. Majingibang was edited by extracting the quotations of Eulmisinbang in Magwahoitong, and was reprinted in the name of Majinbibang. Through analyzing Lee Heon-gil's books, we found two courses through which his books have been handed down. First, Eulmisinbang was quoted separately according to the new structure of Magwahoitong, and the structure of Magwahoitong had been maintained and reprinted under the titles of Majingibang and Majinbibang. Second, Eulmisinbang had maintained its original structure, handed down in the name of Majinbang, and reprinted under the title of Susangsingam. Based on the findings, we selected the quotations of Eulmisinbang in Magwahoitong and Majinbang included in Susangsingam as texts for studying Lee Heon-gil's medicine for measles. Accordingly, it looks likely to rebuild a new research text based on the two woodblock-printed versions, and it will be a crucial material for studying Lee Heon-gil's medicine for measles.