• 한국통신학회논문지
• /
• 제28권7C호
• /
• pp.678-687
• /
• 2003

전력 및 대역폭 제한적인 디지털 통신 시스템을 위한 새로운 변복조 기술인 8SQAM(8-state Superposed Quadrature Amplitude Modulation)은 인접하는 두 심볼간에 진폭과 위상이 상관관계를 유지함으로써 부드럽고 연속적인 위상천이와 함께 적은 포락선 변동을 갖는 출력신호를 생성한다. 또한 8SQAM신호는 심볼간 간섭이 없으며 compact한 스펙트럼 특성을 갖는다. 따라서 8SQAM은 기존의 8PSK와 비교하여 비선형 왜곡에 의한 혼변조(IM)와 인접 심볼 간섭(ISI) 그리고 다중채널(SCPC-FDMA) 환경에서의 인접 채널 간섭(ACI) 영향을 적게 받는다. 본 논문에서는 비선형 증폭 다중채널 간섭 환경에서 8SQAM 시스템의 수신 성능을 전산모의 실험을 통해서 분석하였다. 전산모의 실험 결과 8SQAM은 고출력증폭기(HPA)의 Input back-off(IBO)가 1dB이고 채널 간격이 데이터 비트 율의 41.7%(즉, 스펙트럼 효율 =2.40b/s/Hz)일 때, BER=1$\times$$10^{-4}$ 을 유지하기 위해 요구되는 CNR이 $\alpha$= 0.3의 roll-off 값을 갖는 8PSK 보다 2.7dB 우수한 성능을 보였다.

• 한국통신학회논문지
• /
• 제28권7C호
• /
• pp.669-677
• /
• 2003

전력 및 대역폭 제한적인 디지털 통신 시스템을 위한 새로운 변복조 기술인 8SQAM(8-state Superposed Quadrature Amplitude Modulation) 시스템을 제안한다. 8SQAM은 심볼간 간섭(ISI)이 없으며 인접하는 두 심볼간의 진폭과 위상 사이에 상관관계를 유지함으로써 부드럽고 연속적인 위상천이와 함께 적은 포락선 변동을 갖는 출력신호를 생성한다. 따라서 8SQAM 시스템은 기존의 8PSK와 비교하여 비선형 왜곡에 의한 ISI와 혼변조(IM)에 의한 영향을 적게 받는다. 본 논문에서는 백색 가우시안 잡음 (AWGN)과 ISI 그리고 IM 성분을 갖는 비선형 증폭 채널 환경에서 8SQAM 시스템의 성능을 전산모의 실험을 통해서 분석하였다. 전산모의 실험결과 8SQAM은 고출력증폭기(HPA)의 input back-off(IBO)가 3dB일 때, BER=1$\times$$10^{-4}$ 을 유지하기 위해서 요구되는 CNR 값이 $\alpha$ = 0.25의 roll-off 값을 갖는 8PSK 보다 2.5dB 우수한 성능을 갖는다.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.259-266
• /
• 2004

In this paper. a new two types of EST(Emitter Switched Thyristor) structures are proposed to improve the electrical characteristics including the current saturation capability. Besides, the two dimensional numerical simulations were carried out using MEDICI to verify the validity of the device and examine the electrical characteristics. First, a vortical trench electrode EST device is proposed to improve snap-back effect and its blocking voltage. Second, a dual trench gate EST device is proposed to obtain high voltage current saturation characteristics and high blocking voltage and to eliminate snap-back effect. The two proposed devices have superior electrical characteristics when compared to conventional devices. In the vertical trench electrode EST, the snap-back effect is considerably improved by using the vertical trench gate and cathode electrode and the blocking voltage is one times better than that of the conventional EST. And in the dual trench gate EST, the snap-back effect is completely removed by using the series turn-on and turn-off MOSFET and the blocking voltage is one times better than that of the conventional EST. Especially current saturation capability is three times better than that of the other EST.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.175-182
• /
• 2002

The cement injection technology on the purpose of ground reinforcement and cut-off has been used in construction sites until now. However, recently it is applied to prevent leakage of underground structure. In this study, applicability of the back side waterproof grouting method was verified through performing field model tests and reviewing case histories. From the results of this study, injection shape of the back side waterproof grouting method was appeared to be root type, and waterproof effect by injection of cement grout material was excellent because grout material infiltrated into boundary between wall of structure and back side ground to be waterproof layer. Components influencing infiltration of injection material are type of soil and degree of compaction. For effective injection, injection pressure has to vary gradually from high pressure to low pessure and small quantity of injection material has to be injected for long times. Also, spacing of injection hole must be designed considering condition of back side ground, injection area, W/C ratio, the number of injection and injection pattern properly.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.119-134
• /
• 2004

The purpose of this study was to analyze the angular momentum characteristics of the Fosbury Flop high jump and the role of the body segments for the production of 3 angular momentum components. The subjects were three male jumpers who were former Korean national team players. Their jumping motions were analyzed using the DLT method of three-dimensional cinematography. The conclusions were as follows. 1. All the forward angular momentum needed to clear the bar was created in the take-off phase. Take-off leg was the great contributor of the forward angular momentum. On the other hand, free leg produced large opposite angular momentum. 2. All subject had some lateral angular momentum before the take-off phase. Head and free leg had major contribution to the lateral angular momentum production. Take-off leg produced opposite angular momentum. 3. All subject had some twisting angular momentum, which make the back of the athlete him to the bar, before the take-off phase. Free leg was the major contributor of the twisting angular momentum. Head and trunk was the second contributor of the twisting angular momentum. 4. Total angular momentum needed to clear the bar had no significant correlation to the jumping height. 5. Subject who made excessive angular momentum showed different pattern of angular momentum production and had a poor record compared to other subject.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1141-1145
• /
• 2005

This paper proposes a robust tension control algorithm for the let-off and take-up system driven by servo motor which is robust to disturbance and tension variation by using SVR(Support Vector Regression). Quality of textile goods in fiber manufacturing process highly depends on control of let-off, take-up and tension which are essential for constant tension control of yarn and textile fabrics and correct length of them. The physical properties of textile fabrics are very sensitive to several factors(temperature, humidity, radius change of warp beam etc.) which result in tension change. Rapid development of fiber manufacture machine for higher productivity requires control system for let-off, take-up and tension for robustness to sharp tension-variation and quick response. The validity and the usefulness of the proposed algorithm are thoroughly verified through numerical simulation.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1073-1077
• /
• 2006

Proton irradiation technology was used for improvement of switching characteristics of the PT-IGBT. Proton irradiation was carried out at 5.56 MeV energy with $1{\times}10^{12}/cm^2$ doze from the back side of the wafer. The I-V, breakdown voltage, and turn-off delay time of the device were analyzed and compared with those of un-irradiated device and e-beam irradiated device which was conventional method for minority carrier lifetime reduction. For proton irradiated device, the breakdown voltage and the on-state voltage were 733 V and 1.85 V which were originally 749 V and 1.25 V, respectively. The turn-off time has been reduced to 170 ns, which was originally $6{\mu}s$ for the un-irradiated device. The proton irradiated device was superior to e-beam irradiated device for the breakdown voltage and the on-state voltage which were 698 V and 1.95 V, respectively, nevertheless turn-off time of proton irradiated device was reduced to about 60 % compared to that of the e-beam irradiated device.

• 대한전기학회논문지
• /
• 제45권4호
• /
• pp.562-567
• /
• 1996

A new lateral MOS controlled thyristor, named Shorted Anode LMCT(SA-LMCT), is proposed and analyzed by a two-dimensional device simulation. The device structure employs the implanted n+ layer which shorts the p+ anode together by a common metal electrode and provides a electron conduction path during turn-off period. The turn-off is achieved by not only diverting the hole current through the p+ cathode short but also providing the electron conduction path from the n-base into the n+ anode electrode. In addition, the modified shorted anode LMCT, which has an n+ short junction located inside the p+ anode junction, is also presented. It is shown that the modified SA-LMCT enjoys the advantage of no snap-back behavior in the forward characteristics with little sacrificing of the forward voltage drop. The simulation result shows that the turn-off times of SA-LMCT can be reduced by one-forth and the maximum controllable current density may be increased by 45 times at the expense of 0.34 V forward voltage drop as compared with conventional LMCT. (author). 11 refs., 6 figs., 1 tab.

• 한국산업보건학회지
• /
• 제7권1호
• /
• pp.87-98
• /
• 1997

In this study, subway train vibration has been measured to characterize the whole body vibration of Seoul subway lines for various human postures. Results show that the floor vibration level of the subway trains in the vertical direction is higher than that in other directions. At the standing human posture, vibration level of the head in the right-left direction are increased while that in the vertical direction is decreased. It is assumed that the different flexibility of the human body and the rolling motion of the subway trains are the main cause. At the sitting posture with back seat on, vibration level in the right and left direction at the human ischial tuberosities is lower than that in other directions. Results also show that there were little difference between back-seat on model and back-seat off model. Transmissibility analysis shows how the subway vibration affects the response of a human body.

• Current Photovoltaic Research
• /
• 제2권2호
• /
• pp.73-77
• /
• 2014

To investigate the effect of metal back-reflective layers (MBLs) on the performance of GaAs solar cells, we fabricated GaAs solar cells on Al and Ag metal layers using the transfer printing technique. We also investigated the effect of MBL texturing on the performance of transfer printed GaAs solar cells. Transfer printed solar cells with MBLs exhibited improved photovoltaic performance compared to solar cells without MBLs due to light trapping. We demonstrated GaAs solar cells with MBLs on a flexible substrate and performed systematic bending tests. All the measured characteristics of solar cells showed little change in performance.