• 아시안잔디학회지
• /
• 제9권3호
• /
• pp.187-198
• /
• 1995

The objective of this research was to produce sod by box seeding for zoysiagrass or by vegetative propagation for zoysiagrass and manilagrass.1 Various ratio of peatmoss to sand(v /v) were prepared to find idea[ medium for fast and light weight sod production. Then, the days required for sod formation, the effect of growth regulators on the growth of turfgrass, and the various storage methods for winter keeping of sods were also investigated. 1.The mixed medium of sand and peatmoss(v /v, 1 : 2) showed more biomass production than that of sand. 2.In comparison of seeding rate of zoysiagrass, the amount of log /$m^2$ was most effective in the fast and dense sod formation. The amount of 20g /$m^2$ also showed fast sod formation. But, it resulted in weak plant and less tillering. During April to June, about 100 days were required to form sod with seeding rate of 5g /$m^2$ regardless of seeding time. Whereas 80 days were required to form sod in the rate log /$m^2$, which was 20 days shorter than that of 5g /$m^2$. 3.More than 85% of shoots in sod stored in field or plastic house during the winter time resumed the growth in good appearance after transplanting. The whole covering of ground with sod resulted in less weeds and faster formation of lawn. 4.Vegetative propagation of manilagrass showed about 7 to 15 days faster formation of sod than that of zoysiagrass. Application of GA increased shoot growth and BA increased the total number of tillering. However, the effects of the combined application of GA and BA were negligable.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.614-615
• /
• 2006

Investigation of influence the morphology of initial powder particles, application pore-formers for sintering of nickel powders and application of flux for sintering of aluminum was made. Using different methods was prepared material with size of porous in wide range size of pores ($1-500{\mu}m$). Using the flux for gravity sintering of aluminum in air atmosphere was manufactured porous material with porosity about 45%..

• 전자공학회논문지S
• /
• 제34S권1호
• /
• pp.115-123
• /
• 1997

In this paper we present a polynomial matrix decomposition algorithm that determines a polynomial matix M(z) which satisfies the relation V(z)=M(z) for a given polynomial matrix V(z) which is paraconjugate hermitian matrix with normal rank r and is positive semidenfinite on the unit circle of z-plane. All the decomposition procedures in this proposed method are performed in the digitral domain. We also discuss how to apply the polynomial matirx decomposition in realizing MIMO LBR two-pairs.

• Korean Chemical Engineering Research
• /
• 제56권4호
• /
• pp.536-541
• /
• 2018

Excess molar volumes ($V_m^E$) of binary mixtures of 1-propanol or 2-propanol (1) + cyclohexane or n-hexane (2) were measured with V-shaped dilatometer at 303.15 K. The $V_m^E$ data for these mixtures varied as: 2-propanol > 1-propanol and were higher for cyclohexane than n-hexane for both propanol systems. The experimental data were correlated with Redlich-Kister polynomial. The $V_m^E$ data were interpreted qualitatively as well as quantitatively in terms of Flory-Treszczanowicz-Benson model and Prigogine-Flory-Patterson theory. Both models correctly described the sign and shape of $V_m^E$ vs $x_1$ curves. The values calculated by both the models agree well with the experimental data.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.429-429
• /
• 2009

Nanoporous anodic alumina membranes (NAAM) with high-density through-hole pores fabricated by hard anodization of aluminum in 0.3 M oxalic acid under the applied voltage of 40 (mild anodization), 80, 100, 120 and 140 V were investigated. The current-time responses monitored using a PC-controlled anodization cell and the corresponding pore structures attainable from field-enhanced scanning electron microscopy (FE-SEM) were analyzed in order to establish the optimum fabrication process. The nanoporous structure can be produced for all the voltage conditions, while the stabilized through-hole pore formation seems to occur at 40, 80 and 140 V. The growth rate under 140 V hard anodization was over 30 times higher than under 40 V mild anodization (1.5 um/hr).

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.39-44
• /
• 2010

1.5 V and 3.0 V-class film-type primary batteries were designed for radio frequency identification (RFID) tag. Efficient fabrication processes such as screen-printings of conducting layer ($25{\mu}m$), active material layer ($40{\mu}m$ for anode and $80{\mu}m$ for cathode), and electrolyte/separator/electrolyte layer ($100{\mu}m$), were adopted to give better performances of the 1.5 V-class film-type Leclanch$\acute{e}$ primary battery for battery-assisted passive (BAP) RFID tag. Lithium (Li) metal is used as an anode material in a 3.0 V-class film-type $MnO_2||$Li primary battery to increase the operating voltage and discharge capacity for application to active sensor tags of a radio frequency identification system. The fabricated 3.0 V-class film-type Li primary battery passes several safety tests and achieves a discharge capacity of more than 9 mAh $cm^{-2}$.

• 시스템엔지니어링학술지
• /
• 제5권2호
• /
• pp.11-16
• /
• 2009

This study introduces the verification, validation & accreditation (VV&A) process for modeling & simulation (M&S). VV&A is standard process for credibility of M&S. In several countries including USA, for weapon system of Defense Development using M&S, VV&A is necessary procedures to acquire official approving for credibility of M&S. Many countries have regular recommend practice guide (RPG) and instructive for VV&A of M&S. In this study, we focus the VV&A key concepts as Department of Defense RPG of USA and give the outline of the main VV&A concepts because we don't have any available VV&A Instructive. Also, this report documents the first significant VV&A application for a MITS(M-SAM Integrate Test System) including Verification and Validation(V&V) activity and tasks.

• 생약학회지
• /
• 제49권1호
• /
• pp.70-75
• /
• 2018

Acer tegmentosum Maxim (ATM) has been used to treat hepatic disorders in traditional oriental medicine. However, there is little information about phytochemical constituents for quality control of ATM. In this study, we developed and established a simultaneous analytical method of the 10 marker compounds (three coumarins, 3 flavonoids, 1 lignan, 3 phenolics) in ATM using ultra-performance liquid chromatography-mass spectrometry (UPLC-MS/MS). Chromatographic separation of ten target analytes was achieved with a Waters Acquity UPLC BEH $C_{18}$ analytical column ($2.1{\times}100mm$, $1.7{\mu}m$), using a mobile phase of 0.1% (v/v) formic acid in water and acetonitrile with gradient elution. Identifications and quantitation of all analytes were performed using a Q-Exactive UPLC-MS/MS system. Correlation coefficients of the calibration curve for all analytes were ${\geq}0.9986$. The values of limits of detection and quantification of all analytes were 0.5-10.0 and 5.0-50.0 ng/mL, respectively. The established UPLC-MS/MS method successfully identified all target analytes in ATM, and the phytochemicals were 0.01-67.98 mg/g in its lyophilized water extract.

• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.451-458
• /
• 2012

The voluntary EMG (vEMG) signal from electrically stimulated muscle is very useful for feedback control in functional electrical stimulation. However, the recorded EMG signal from surface electrodes has unwanted stimulation artifact and M-wave as well as vEMG. Here, we propose an event-synchronous adaptive digital filter for the suppression of stimulation artifact and M-wave in this application. The proposed method requires a simple experimental setup that does not require extra hardware connections to obtain the reference signals of adaptive digital filter. For evaluating the efficiency of this proposed method, the filter was tested and compared with a least square (LS) algorithm using previously measured data. We conclude that the cancellation of both primary and residual stimulation artifacts is enhanced with an event-synchronous adaptive digital filter and shows promise for clinical application to rehabilitate paretic limbs. Moreover because this algorithm is far simpler than the LS algorithm, it is portable and ready for real-time application.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.427-431
• /
• 2018

본 논문에서는 최근 전력반도체 산업에서 활용되어지는 와이드밴드갭 반도체 중에 하나인 $Ga_2O_3$를 이용한 에피웨이퍼 성장에 관련되어 서술하였다. GaN 성장시 활용되어지는 HVPE법을 이용하여 Sn이 도핑된 $Ga_2O_3$ 기판웨이퍼에 평균 $5.3{\mu}m$ 두께로 성장시켰다. 일반적으로 화합물반도체의 에피 두께가 $5{\mu}m$일 경우 SiC의 경우 600V 전력반도체소자를 제작할 수 있으며, $Ga_2O_3$ 에피웨이퍼의 경우에는 1000V이상의 전력소자를 제작할 수 있다. 성장된 에피웨이퍼의 J-V 측정 결과 $2.9-7.7m{\Omega}{\cdot}cm^2$의 온저항을 얻을 수 있었으며, 역방향의 경우 상당히 높은 전압에서도 누설전류가 거의 없음을 알 수 있었다.