• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권4호
• /
• pp.269-274
• /
• 2004

Current delivery system, in which the analog current produced by a unique DAC circuit is stored into a current-memory circuit and delivered in a time-divided sequence, shows variation of output current as low as 4% in a current source data-driver IC for AM-OLED driven by a current-programmed method without any fuse repairing after fabrication. This driver IC has 54 outputs and can sink constant current as low as 3 ${\mu}A$ with 6-bit analog levels. Such a low current level without variation can hardly be obtained by an ordinary MOS transistor because the current level is in the sub-threshold region and changes exponentially with threshold voltage variation. Thus we adopted a current mirror circuit composed of bipolar transistors to supply well-controlled current within a nano-ampere range.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권3호
• /
• pp.139-144
• /
• 2003

We report the results of extensive mixed mode simulations and theoretical analysis to quantify the contribution of the edge direct tunneling (EDT) current on the total gate leakage current of 80nm NMOSFET with SiO2 gate dielectric. It is shown that EDT has a profound impact on basic analog circuit building blocks such as sample-hold (S/H) circuit and the current mirror circuit. A transistor design methodology with zero gate-source/drain overlap is proposed to mitigate the EDT effect. This results in lower voltage droop in S/H application and better current matching in current mirror application. It is demonstrated that decreasing the overlap length also improves the basic analog circuit performance metrics of the transistor. The transistor with zero gate-source/drain overlap, results in better transconductance, input resistance, output resistance, intrinsic gain and unity gain transition frequency.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.212-215
• /
• 2000

This paper introduces to design analog circuits with Verilog-A. It is a tool for design and simulation of analog ICs in behavioral level. Verilog-A has been already established standard and used to IP development in USA. We have proved the possibility of Verilog-A by comparing with measurement data of a fabricated 235MHz PLL circuit. This paper also describes another advantage of Verilog-A.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.909-912
• /
• 1999

This paper describes realized APC and pre-equalizer circuit, and their operation principle and test results. In analog optical transmitter, constant lasing power control, free of signal clipping and linearity are important considerations. We examined pre-equalizer and APC(Automatic Power Control) circuit to improve the analog optical transmitter performance.

• 한국산학기술학회논문지
• /
• 제10권2호
• /
• pp.248-255
• /
• 2009

통신시스템에서의 에러의 처리는 매우 중요한 문제로서 비터비 디코더와 같은 에러처리를 위해서 주로 절대값으로 표현하기 때문에 아날로그 절대값 회로가 자주 필요하게 된다. 이 논문에서는 절대값을 정확하게 계산할 수 있는 아날로그 절대값 회로를 제안하였다. 제안한 절대값 회로에는 부호가 반대인 두 신호들을 만든 다음, 이 신호들을 아날로그MAX회로에 인가하여 둘 중 최대값을 출력하게 하는 방법이다. 이 구조를 회로로 구현하기 위해서는 두 개의 입력 신호를 반대방향으로 차를 구하여, 크기는 같고 부호가 다른 두 개의 신호를 만든 다음 이들을 MAX회로의 입력으로 사용하는 회로를 설계하였다. 본 논문에서는 제안한 회로를 Hspice를 이용하여 시뮬레이션을 수행했으며, 그 결과를 제시하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.960-964
• /
• 2003

In this paper, the CMOS integrated circuit technique for implementing current-mode maximum and minimum operations scheme is described. The maximum and minimum operations are incorporated into the same scheme with parallel processing. Using this scheme as the basic unit, an analog three-input maximum, median, and minimum circuit is designed. The performance of the proposed circuit shows a very sharp transfer characteristic and high accuracy. The proposed circuit achieves a high-speed operation, which is suitable for real-time systems. The PSPICE simulation results demonstrating the characteristic of the proposed circuit are included.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.513-513
• /
• 2000

An integrable circuit technique for implementing high-speed analog two-input Max/Min circuit is described. The realization method is suitable for fabrication using CMOS technology. The proposed circuit comprises a current mirror and electronic switch connected with a absolute value circuit. The maximum or minimum operation of the proposed circuit can be selected by an external control voltage. The proposed analog Max/Min circuit has a very sharp transfer characteristic and is suitable for real-time systems. Simulation results verified the circuit performances are agreed with the expected values.

• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.135-143
• /
• 2003

본 논문에서는 다치논리(Multiple-Valued Logic : MVL)를 위한 데이터 변환기의 설계방법에 대해서 논의한다. 3.3 v의 단일 전원의 4 디지트의 CMOS 아날로그 4치 변환기(Analog to Quaternary Converter : AQC)와 4치 아날로그 변환기(Quaternary to Analog Converter)를 뉴런모스를 사용한 다운리터럴회로(Down-Literal Circuit : DLC)를 사용하여 설계하였다. 뉴런모스 다운리터럴회로는 제안된 AQC와 QAQ가 4개의 전압 레벨값을 출력과 입력으로 사용하게 하며, 소자의 다중 문턱전압 특성을 갖게한다. 제안된 AQC -QAC 회로는 구조면에서 전전력 소모의 특성을 갖는다.

• 센서학회지
• /
• 제12권1호
• /
• pp.51-56
• /
• 2003

We describe a charge pump circuit using VCO (voltage controlled oscillator) for storing information into local memories in neural networks. The VCO is used for adjusting the output voltage of the charge pump to the reference voltage and for reducing the fluctuation generated by the clocking scheme. The charge pump circuit is simulated by using Hynix 0.35um CMOS process parameters. The proposed charge pump operates properly regardless to the temperature and the supply voltage variation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.80.1-80
• /
• 2002

In this article, an alternative analog multiplier circuit, using the translinear second-generation current conveyors with the external resistors. The realization method makes use of the inherited translinear loop of the current conveyor offering the positive-supply current that provides in the quartersquare algebraic identity. The proposed circuit operates in voltage mode and it achieves a high accuracy. The PSPICE simulation results confirm that the performances of the proposed multiplier circuit, such as dynamic range and accuracy, are agreed with the theoretical results.