• Journal of information and communication convergence engineering
• /
• v.14 no.4
• /
• pp.268-271
• /
• 2016

An efficient inductive switching noise suppression technique for mixed-signal integrated circuits (ICs) using standard CMOS digital technology is proposed. The proposed design technique uses a parallel RC circuit, which provides a damping path for the switching noise. The proposed design technique is used for designing a mixed-signal circuit composed of a ring oscillator, a digital output buffer, and an analog noise sensor node for $0.13-{\mu}m$ CMOS digital IC technology. Simulation results show a 47% reduction in the on-chip inductive switching noise coupling from the noisy digital to the analog blocks in the same substrate without an additional propagation delay. The increased power consumption due to the damping resistor is only 67% of that of the conventional source damping technique. This design can be widely used for any kind of analog and high frequency digital mixed-signal circuits in CMOS technology

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.3
• /
• pp.35-42
• /
• 2017

This paper presents hardware implementation of background timing-skew calibration technique for time-interleaved analog-to-digital converters (TI ADCs). The timing skew between any two adjacent analog-digital (A/D) channels is detected by using pure digital Finite Impulse Response (FIR) delay filter. This paper includes hardware architecture of the system, main units and small sub-blocks along with control logic circuits. Moreover, timing diagrams of logic simulations using ModelSim are provided and discussed for further understanding about simulations. Simulation process in MATLAB and Verilog is also included and provided with basic settings need to be done. For hardware implementation it not practical to work with all samples. Hence, the simulation is conducted on 512 TI ADC output samples which are stored in the buffer simultaneously and the correction arithmetic is done on those samples according to the time skew algorithm. Through the simulated results, we verified the implemented hardware is working well.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.9-14
• /
• 2009

This paper describes measurement of an on-ship power supply noise in mixed-signal integrated circuits. To measure the on-chip power supply noise, we can check the effects of analog circuits and compensate it. This circuit consists of two independent measurement channels, each consisting of a sample and hold circuit and a frequency to digital converter which has a buffer and voltage controlled oscillator(VCO). The time-based voltage information and frequency-based power spectrum density(PSD) can be achieved by a simple analog to digital conversion scheme. The buffer works like a unit-gain buffer with a wide bandwidth and VCO has a high gain to improve resolution. This circuit was fabricated in a 0.18um CMOS technology and has 2.06mV/count. The noise measurement circuit consumes 15mW and occupies $0.768mm^2$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.5
• /
• pp.12-17
• /
• 2011

In this work, the analog performances of n-MOSFET fabricated on strained-Si/relaxed Si buffer layer with Ge mole fractions and thermal annealing temperatures after device fabrication have been characterized in Depth. The effective electron mobility was increased with the increase of Ge mole fraction for all annealing temperatures. However the effective electron mobility was decreased at the Ge mole fraction of 32%. The analog performances were enhanced with the increase of Ge mole fraction at the room temperature but they were degraded at the Ge mole fraction of 32%. Since the degradation of the effective electron mobility of strained-Si layer is more significant than one of conventional Si layer at elevated temperature, the degradation of analog performances of SGOI devices were increased than those of SOI devices.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.5
• /
• pp.94-103
• /
• 1997

It is necesary that analog buffer circuit should drive an external load in the VLSI design such as switched capacitor efilter (SCF), D/A converter, A/d converter, telecommunicatin circuit, etc. The conventional CMOS buffer circuit have many probvlems according as CMOS technique. Firstly, Capacity of large load ar enot able to opeate well. The problem can be solve to use class AB stages. But large load are operated a difficult, because an element of existing CMOS has a quadratic functional relation with inptu and outut voltage versus output current. Secondly, whole circuit of dynamic rang edecrease, because a range of inpt and output voltages go down according as increasing of intergration rate drop supply voltage. In this paper suggests that new differential CMOS line driver make out of operating an external of large load. In telecommunication's chip case transmission line could be a load. It is necessary that a load operate line driver. The proposal circuit is planned to hav ea high generation power rnage of voltage with preservin linearity. And circuit of capability is inspected through simulation program (HSPICE).

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.160-164
• /
• 2000

Digital to analog converters based on the Josephson effect are promising for voltage standard, because they produce voltage steps with high precision and good stability. In this paper, we made a simulation study on RSFQ D/A converter. RSFQ D/A converter was composed of NDRO cells, T(toggle) flip-flops, D flip-flops, Splitters and Confluence Buffers. Confluence Buffer was used to reset the D/A converter. We also obtained operating margins of the important circuit values by simulational experiments.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.172-177
• /
• 2002

Superconductive digital to analog converters (DAC) based on Josephson effect produce the voltage steps with high precision and good stability Therefore, they can be applied to obtain a very accurate ac voltage standard. In this paper, we made a simulation study of Rapid Single Flux Quantum (RSFQ) DAC. RSFQ DAC was composed of Non-destructive Head Out (NDRO) cells, T flip-flops, D flip-flops, Splitters, and Confluence Buffers. Confluence Buffer was used in resetting the DACs. We also obtained operating margins of the important circuit parameters in simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1097-1105
• /
• 2002

In display systems employing analog monitors, the tearing artifact such that an window screen is divided into two parts showing different scenes can occur when the change of scenes in the moving pictures is very fast, but the frame buffer's refresh rate does not match the monitor's scanning frequency. It is especially noticeable at high frame rate. DVR system is a recently popularized visual monitoring system. The tearing artifacts becomes more serious since the frame buffer's refresh rate is very high due to the requirement of multi channel display in the DVR. In this paper, we propose an improved display system for windows-based DVR systems which prevents the tearing artifacts without deterioration of display speed performance. The efficiency of the proposed display system is verified through experiments.

• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.129-133
• /
• 1987

To develop a microcomputer-based data acquisition system for measurement of variables such as temperature and weight in food process, a low-cost data acquisition system was developed using an Apple II microcomputer. The system consisted of a microcomputer, a temperature sensor made of pt-100, a strain gauge load cell for weighing, a preamplifier for signal conditionings and an interface device. Interface device was built with programmable interface chip MC 6821, tristate buffer 74244 and analog-to-digital converter ADC 0809. The analog signals of temperature and weight were serially acquisited upon the program. The BASIC language was used for operating the data acquisition and data handling programs. The system successfully measured the variables such as temperature and weight with various sampling intervals in food dehydration process.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.443-445
• /
• 1990

In this paper, a high speed graphic processor module with a real-time processing capability is proposed, where the module is design to be compatible to the standard VME bus and consists of TMS34010 Graphic processor, TMS44C251 frame buffer, 512KB system memory and BT101 digital to analog converter. The proposed graphic module is implemented and tested in real-time via experiments with an integrated system with other VME modules.