• Macromolecular Research
• /
• v.15 no.6
• /
• pp.565-574
• /
• 2007

In this study, five representative, commercially available polymers, Ultem 1000 polyetherimide, Kapton polyimide, phenolic resin, polyacrylonitrile and cellulose acetate, were used to prepare pyrolyzed polymer membranes coated on a porous {\alpha}-alumina$ tube via inert pyrolysis for gas separation. Pyrolysis conditions (i.e., final temperature and thermal dwell time) of each polymer were determined using a thermogravimetric method coupled with real-time mass spectroscopy. The surface area and pore size distribution of the pyrolyzed materials derived from the polymers were estimated from the nitrogen adsorption/desorption isotherms. Pyrolyzed membranes from polymer precursors exhibited type I sorption behavior except cellulose acetate (type IV). The gas permeation of the carbon/{\alpha}-alumina$ tubular membranes was characterized using four gases: helium, carbon dioxide, oxygen and nitrogen. The polyetherimide, polyimide, and phenolic resin pyrolyzed polymer membranes showed typical molecular sieving gas permeation behavior, while membranes from polyacrylonitrile and cellulose acetate exhibited intermediate behavior between Knudsen diffusion and molecular sieving. Pyrolyzed membranes with molecular sieving behavior (e.g., polyetherimide, polyimide, and phenolic resin) had a $CO_2/N_2$ selectivity of greater than 15; however, the membranes from polyacrylonitrile and cellulose acetate with intermediate gas transport behavior had a selectivity slightly greater than unity due to their large pore size.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.3
• /
• pp.329-336
• /
• 2008

The pilot study was conducted to evaluate the applicability of air flotation(AF) processes combined with biological nutrient removal(BNR) for the retrofitting of conventional wastewater treatment facilities. The BNR system was operated in pre-denitrification and intermittent aeration; developed ceramic membrane diffusers were installed to separate the solid-liquid of activated sludge at the bottom of a flotation tank. Before performing a pilot scale study, the size distribution of microbubbles generated by silica or alumina-based ceramic membrane diffusers was tested to identify the ability of solid-liquid separation. According to the experimental results, the separation and thickening efficiency of the alumina-based ceramic membrane diffuser was higher than the silica-based ceramic membrane diffuser. In a $100m^3/d$ pilot plant, thickened and return sludge concentration was measured to be higher than 15,000mg SS/L, therefore, the MLSS in the bioreactor was maintained at over 3,000mg SS/L. The effluent quality of the AF-BNR process was 4.2mg/L, 3.7mg/L, 10.6mg/L and 1.6mg/L for $BOD_5$, SS, T-N and T-P, respectively. Lastly, it was revealed that the unit treatment cost by flotation process is lower than about $1won/m^3$ compared to a gravity sedimentation process.

• Korean Membrane Journal
• /
• v.5 no.1
• /
• pp.68-74
• /
• 2003

Methane steam reforming (MSR) reaction for hydrogen production was studied in a membrane reactor (MR) using two tubular membranes, one Pd-based and one of porous alumina. A higher methane conversion than the thermodynamic equilibrium for a traditional reactor (TR) was achieved using MRs. The experimental temperature range was 350-500$^{\circ}C$; no sweep-gas was employed during reaction tests to avoid its back-permeation through the membrane and the steam/methane molar feed ratio (m) varied in the range 3.5-5.9. The best results (the difference between the MR conversion and the thermodynamic equilibrium was of about 7%) were achieved with the alumina membrane, working with the highest steam/methane ratio and at 450$^{\circ}C$. Silica membranes prepared at KRICT laboratories were characterized with permeation tests on single gases (N$_2$, H$_2$ and CH$_4$). These membranes are suited for H$_2$ separation at high temperature.

• Journal of the Microelectronics and Packaging Society
• /
• v.3 no.2
• /
• pp.39-50
• /
• 1996

본 연구에선 주어진 조성의 알루미나 green sheet에 대하여 텅스텐의 입경 및 산화 물의 조성을 변화시키므로써 수축률을 제어하여 camber를최소화하여 결합강도를 최대로 하 는 텅스텐 페스트조성을 찾아내는 것을 목적으로 하였다. 본 실험에서 사용한 텅스텐 분말 의 입경은 0.35$\mu$m, 0.6$\mu$m, 0.72$\mu$m, $1.5\mu$m, 1.9$\mu$m, 3.2$\mu$m이며 frit는 Al2O3, MgO, SiO2 와 Al2O3, CaO, SiO2를 사용하여 각각의 조성에 따라 함량을 변화시키며 실험하였다. 소성 은 154$0^{\circ}C$로 습윤 수소분위기에서 시행하였으며 사용된 알루미나 green sheet의 알루미나 중심 입경은 2.8$\mu$m이었다. 분석은 주사전자 현미경으로 미세구조를 관찰하였고 EPMA Line Profile로 원소 분석을 하였으며 잔류응력을 측정하기 위하여 XRD분석을 하였다. Frit 을 함유하지 않은 경우 텅스텐 분말의 입경이 1.9$\mu$mdlfEo 최대 접합 강도를 나타내었다. Frit을 함유한 경우 Mgo계 frit조성에서는 MgO/Al2O3/SiO3=1/1/1일 때 CaO계 frot 조성에 서는 CaO/Al2O3/SiO2=1/2/1일 때 최대 접합 강도를 나타내었다. Frit 함량을 변화시킨 경우 MgO계는 10wt%함유하였을 때 CaO 계는 5wt%함유하였을 때 최대 접합강도를 나타내었 다. Frit 함량을 변화시킨 경우 MgO계는 10wt%함유하였을 때, CaOr계는 5wt%함유하였을 때 최대 접합강도를 나타내었다.

• Journal of the Korean Ceramic Society
• /
• v.43 no.9 s.292
• /
• pp.564-568
• /
• 2006

AlO(OH) nano gel is used in precursor of ceramic material, coating material and catalyst. For use of these, not only physiochemical control for particle morphology, pore characteristic and peptization but also studies of synthetic method for preparation of advanced application products were required. In this study, AlO(OH) nano gel was prepared through the aging and drying process of aluminum hydroxides gel precipitated by the hydrolysis reaction of dilute NaOH solution and aluminum sulfate solution. In this process, optimum synthetic condition of AlO(OH) nano gel having excellent pore volume as studying the effect of water and aluminum sulfate mole ratio on gel precipitates has been studied. Water and aluminum sulfate mole ratio brought about numerous changes on crystal morphology, surface area, pore volume and pore size. Physiochemical properties were investigated as using XRD, TEM, TG/DTA, FT-IR, and $N_2$ BET method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.356-356
• /
• 2007

Plasma immersion ion beam deposition (PIIBD) technique is a cost-effective process for the deposition of diamond like carbon thin film, the possible solid lubricant on large surface and a complex shape. We used PIIB process for the preparation of DLC thin film on $Al_2O_3$ with deposition conditions of deposition temperature range $200^{\circ}C$, working gas pressure of 1.310-1Pa. DLC thin films were coated by $C_2H_2$ ion beam deposition on $Al_2O_3$ after the ion bombardment of SiH4 as the bonding layer. Energetic bombardment of $C_2H_2$ ions during the DLC deposition to ceramic materials generated mixed layers at the DLC-Si interface which enhanced the interface to be highly bonded. Wear test showed that the low coefficient of friction of around 0.05 with normal load 2.9N and proved the advantage of the low energy ion bombardment in PIIBD process which improved the tribological properties of DLC thin film coated alumina ceramic. Furthermore, PIIBD was recognized as a useful surface modification technique for the deposition of DLC thin film on the irregular shape components, such as molds, and for the improvement of wear and adhesion problems of the DLC thin film, high temperature solid lubricant.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.21-27
• /
• 1993

Technical grade n-hexane whose purity is 54% has been purified for HPLC use. Methylcyclopentane, 2-methylpentane, and 3-methylpentane which are hardly isolated by fractional distillation were separated by the liquid-solid chromatography using molecular sieve 5A. UV and fluorescence impurities whose contents are critically regulated for HPLC solvent were removed by the adsorptive separation with alumina and silica gel. The present method also reduced the impurities of color(APHA), acidity, water, residue after evaporation, sulfur, and thiophene content, and the impurity contents were well within the specifications of HPLC solvent.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.3
• /
• pp.56-61
• /
• 2021

In this study, Al₂O₃ and H-ZSM-5 were coated on the inner wall of the stainless steel tube for the stable use of liquid hydrocarbon fuel and an endothermic catalyst used as coolant for hypersonic flying vehicles. Coke production is inevitable by the endothermic decomposition reaction of the liquid hydrocarbon fuel, and Fe, Ni metals induce the production of the filamentous coke by using a stainless steel tube reactor as a cooling channel. By coating the stainless steel with H-ZSM-5, Fe and Ni metals are prevented from being directly exposed to the liquid hydrocarbon fuel, and the formation of the filamentous coke is inhibited. In addition, Al₂O₃ is coated between the stainless steel and H-ZSM-5 to enhance adhesion bond strength.

• Journal of the Korean Ceramic Society
• /
• v.26 no.1
• /
• pp.100-108
• /
• 1989

Aluminum hydroxides were prepared by the alkoxide hydrolysis method using Al-isopropoxide as a starting material and NH4OH as a catalytic agent. When Al-isopropoxide was hydrolyzed in a H2O-NH3 system, only Al(OH)3 was obtained over all pH values. However, AlOOH was formed besides Al(OH)3 when Al-isopropoxide was hydrolyzed in a H2O-NH3-isopropyl alcohol system. The AlOOH/Al(OH)3 ratio was increased as the isopropyl alcohol content was increased. The hydroxides, Al(OH)3 and AlOOH, obtained in this study and the commerical products, $\alpha$-Al2O3 and AlOOH were subjected to the carbothermal reduction and nitridation reaction to product AlN powder, using carbon black as a reducing agent under N2 atmosphere at various temperatures. AlN was synthesized from the obtained Al(OH)3 and the commercial AlOOH at 145$0^{\circ}C$, however, synthesized from the obtained AlOOH and the commercial alpha-alumina at 135$0^{\circ}C$. The temperature difference is assumed to be attributed to the reactivity of those powders. AlN powder prepared from the Al-isopropoxide was observed to have the narrower particle size distribution than that prepared from the commercial $\alpha$-Al2O3 or AlOOH.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.540-545
• /
• 2015

This paper presents the design, fabrication and measurement results of a S-band internally-matched power amplifier using Gallium Nitride High Electron Mobility Transistor(GaN HEMT) die. In order to fabricate the S-band internally-matched power amplifier, a high dielectric substrate and alumina were used for input/output matching circuits. The measured output power is 55.4 dBm, the drain efficiency is 78 % and the power gain is 11 dB under pulse operation at the frequency of 3 GHz.