• Journal of the Korean Geotechnical Society
• /
• v.37 no.10
• /
• pp.13-25
• /
• 2021

The most widely used method for determining the blast effects of explosives is the Trauzl test. This test is used to measure the explosive power (strength) of a substance by determining volume increase, which is produced by the detonation of a tested explosive charge in the cavity of a lead block with defined quality and size. In this paper, Trauzl lead block test and High speed 3D-DIC (Digital Image Correlation) system were conducted to evaluate the stemming effect of the blast hole. The effects of stemming materials can be expressed as the expansion of the cavity in a standard lead block through explosion of the explosives. The blasting experiment was conducted with emulsion explosives. The stemming material in the blast hole of lead block, which was adopted in this study, were using sand and stone chips. Results of blasting experiment and numerical analysis showed that the expansion rates of lead block were most affected by stone chips followed by sand. Also, as result of dynamic strain measurement on the lead block surface of High speed 3D-DIC system, the displacement and surface strain on the block were the highest in the experiment case of stone chips stemming.

• Journal of Digital Convergence
• /
• v.19 no.1
• /
• pp.401-410
• /
• 2021

Since the outbreak of Corona 19, Universities and Lifelong Education Center's arts and sports classes are mainly conducted online. Unfortunately, even in dance where practical practice through face-to-face classes is important, the satisfaction of students is falling because of the limitations of online education. Therefore, it is necessary to measure the quality of education service they feel. In addition, since their academic departure is increasing, we intend to comprehensively study user satisfaction, continuous use intention, and academic continuity intention related to online education. This study confirmed the causal relationship between these 4 variables through exploratory factor analysis, reliability analysis, model fit and validity verification, and path analysis. As a result of the study, 3 out of 6 hypotheses were adopted, and the of education service quality had a positive effect on satisfaction and use in online dance education. But there was also a limit that did not affect the intention to continue the study. In order to solve fundamental problems such as academic departure, follow-up studies taking into account more diverse social variables are needed.

• Geophysics and Geophysical Exploration
• /
• v.24 no.1
• /
• pp.20-27
• /
• 2021

Subsurface rock produces heat from the decay of radioactive isotopes in constituent minerals and gamma-ray emissions, of which the magnitude is dominated by the contents of the major radioactive isotopes (e.g., U, Th, and K). The heat production is generally calculated from the rock density and contents of major isotopes, which can be determined by mass spectrometry of drilled core samples or rock fragments. However, such methods are not easily applicable to deep boreholes because core samples recovered from depths of several hundred meters to a few kilometers are rarely available. A geophysical logging technique for boreholes is available where the U, Th, and K contents are measured from the gamma-ray spectrum. However, this technique requires the density to be measured separately, and the measurement depth of the equipment is still limited. As an alternative method, a normal gamma-ray logging tool was adopted to estimate the heat production from the total gamma activity, which is relatively easy to measure. This technical report introduces the development of the proposed method for evaluating the heat production of a granitic rock mass with domestic commercial borehole logging tools, as well as its application to a ~2 km deep borehole for verification.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.6
• /
• pp.97-109
• /
• 2010

Although the primary liability for online copyright infringement may fall on the individual who illegally copies, transfers, and/or distributes the copyrighted content, the issue of indirect liability for Online Service Providers (OSPS) that provide a channel for the distribution of illegal content has recently come under the spotlight. Currently, in an effort to avoid liability for indirect copyright infringement and improve their reputation, most OSPs have voluntarily applied filtering technology. Under the Copyright Act of Korea, special types of OSPS including P2P and Web-based Hard Drive (WebHard) are required to incorporate filtering technology, and may be charged with penalties if found without one. However, despite the clear need for filtering mechanisms, several arguments have been set forth that question the efficacy and appropriateness of the system. As such, this paper discusses the liability theory adopted in the US. -a leader in internet technology development-and analyzes the scope of liability and filtering related regulations in our copyright law. In addition, this paper considers the current applications of filtering as well as limits of the applied filtering technology in OSPS today. Finally, we make four suggestions to improve filtering in Korea, addressing issues such as clarifying the limits and responsibilities of OSPS, searching for cooperative solutions between copyright holders and OSPS, standardizing the filtering technology to enable compatibility among different filtering techniques, and others.

• Journal of Digital Convergence
• /
• v.19 no.7
• /
• pp.189-197
• /
• 2021

In order to commercialize technology, Korea is continuously fostering specialized institutions for technology transfer/commercialization, and it is composed in various forms. However, there are limited studies on corporate performance according to the type of technology transfer/commercialization specialized institution and the type of support. This study aims to measure the combined utilization performance and performance of companies that have adopted the technology by classifying the types of technology transfer/commercialization specialized institutions. To this end, a study was conducted on 380 companies that promoted the introduction and use of external technologies. As a result of the analysis, it was found that the more the combined use of technology transfer/commercialization specialized institutions has a positive effect on corporate performance, and has different effects on corporate performance depending on the items of external technology introduction. In addition, it was found that the earlier the industrial growth stage is, the higher the corporate performance. Through this study, implications of strategies for the use of specialized organizations for technology transfer and commercialization and introduction of external technologies of the company were presented at the corporate level.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1210-1210
• /
• 2001

On farm analysis of protein, moisture and oil in cereals and oil seeds is quickly being adopted by Australian farmers. The benefits of being able to measure protein and oil in grains and oil seeds are several : $\square$ Optimize crop payments $\square$ Monitor effects of fertilization $\square$ Blend on farm to meet market requirements $\square$ Off farm marketing - sell crop with load by load analysis However farmers are not NIR spectroscopists and the process of calibrating instruments has to the duty of the supplier. With the potential number of On Farm analyser being in the thousands, then the task of calibrating each instrument would be impossible, let alone the problems encountered with updating calibrations from season to season. As such, NIR technology Australia has developed a mechanism for \ulcorner\ulcorner\ulcorner their range of Cropscan 2000G NIR analysers so that a single calibration can be transferred from the master instrument to every slave instrument. Whole grain analysis has been developed over the last 10 years using Near Infrared Transmission through a sample of grain with a pathlength varying from 5-30mm. A continuous spectrum from 800-1100nm is the optimal wavelength coverage fro these applications and a grating based spectrophotometer has proven to provide the best means of producing this spectrum. The most important aspect of standardizing NIB instruments is to duplicate the spectral information. The task is to align spectrum from the slave instruments to the master instrument in terms of wavelength positioning and then to adjust the spectral response at each wavelength in order that the slave instruments mimic the master instrument. The Cropscan 2000G and 2000B Whole Grain Analyser use flat field spectrographs to produce a spectrum from 720-1100nm and a silicon photodiode array detector to collect the spectrum at approximately 10nm intervals. The concave holographic gratings used in the flat field spectrographs are produced by a process of photo lithography. As such each grating is an exact replica of the original. To align wavelengths in these instruments, NIR wheat sample scanned on the master and the slave instruments provides three check points in the spectrum to make a more exact alignment. Once the wavelengths are matched then many samples of wheat, approximately 10, exhibiting absorbances from 2 to 4.5 Abu, are scanned on the master and then on each slave. Using a simple linear regression technique, a slope and bias adjustment is made for each pixel of the detector. This process corrects the spectral response at each wavelength so that the slave instruments produce the same spectra as the master instrument. It is important to use as broad a range of absorbances in the samples so that a good slope and bias estimate can be calculated. These Slope and Bias (S'||'&'||'B) factors are then downloaded into the slave instruments. Calibrations developed on the master instrument can then be downloaded onto the slave instruments and perform similarly to the master instrument. The data shown in this paper illustrates the process of calculating these S'||'&'||'B factors and the transfer of calibrations for wheat, barley and sorghum between several instruments.

• The Korean Society of Law and Medicine
• /
• v.23 no.4
• /
• pp.3-28
• /
• 2022

Recently, the targets and clauses of negotiation between 'National Health Insurance Service (NHIS)' and Pharmaceutical companies has been expanded. Due to newly adopted 'Quality management clause', 'Compulsory supply maintenance clause' and 'Penalty for breach of contract clause', not only 'Ministry of Health and Wellfare (MOHW)'s 'drug listing' and 'Price cap' announcement, but also 'negotiation between NHIS and pharmaceutical companies' can be a legal sanction to the suppliers. Once secretary of MOHW order NHIS to negotiate with pharmaceutical company, NHIS notify this order to the company and enter into the negotiation. 'The order' exists in the public domain between the government (MOHW) and public institutions (NHIS) and does not constrain the legal rights of companies (Therefore companies cannot pile a lawsuit about the order). However, 'the notice' or 'negotiation' is an act which has a counterpart, can be a target of administrative litigation if the company get some disadvantages from the talks. Negotiations can be divided into four types according to "the target (whether it is listed on the insurance benefit list)" and "the purpose (whether the target is price or conditional)." In particular, negotiations on listed drugs, whose goal is to set unfavorable conditions for companies, can be illegal if there is no price. So we need to consider compensation for the company as an incentive to negotiate.

• Science of Emotion and Sensibility
• /
• v.25 no.4
• /
• pp.45-52
• /
• 2022

Recently, interest in and demand for sensors that recognize physical activity and their products are increasing. In particular, the development of wearable materials that are flexible, stretchable, and able to detect the user's biological signals is drawing attention. In this study, an experiment was conducted to improve the dip-coating efficiency of a single-walled carbon nanotube dispersion solution after fine holes were made in a hydrophobic material with a micro needle. In this study, dip-coating was performed with a material that was not penetrated, and comparative analysis was performed. The electrical conductivity of the sensor was measured when the sensor was stretched using a strain universal testing machine (Dacell Co. Ltd., Seoul, Korea) and a multimeter (Keysight Technologies, Santa Rosa, CA, USA) was used to measure resistance. It was found that the electrical conductivity of a sensor that was subjected to needling was at least 16 times better than that of a sensor that was not. In addition, the gauge factor was excellent, relative to the initial resistance of the sensor, so good performance as a sensor could be confirmed. Here, the dip-coating efficiency of hydrophobic materials, which have superior physical properties to hydrophilic materials but are not suitable due to their high surface tension, can be adopted to more effectively detect body movements and manufacture sensors with excellent durability and usability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4D
• /
• pp.469-476
• /
• 2008

Recently, TOD gains popularity as a traffic solution measure of high density urban regeneration projects. The purpose of this study is to investigate traffic impacts of high density TOD projects, and to identify the issues to be resolved. For a case study, it chooses Gangnamgucheong station in Gangnam area served by two subway lines, and designates 400m radius from the station as a site for high-density development. The MOEs chosen for this study is traffic volume, time, distance, speed, and mode share. The SECOM model is adopted for traffic simulation. The analysis results show that high-density TOD is an effective tool for traffic improvement even with only one station area being implemented. It is found that the traffic volume increases near the station in nature where high-density development occurs, but it declines overall in the rest of Gangam area. The total travel time and distance of passenger vehicles decline, meaning that the traffic condition becomes better than before. With regulation on parking supply, the improvement becomes more vivid. In terms of the changes of traffic speed, both alternatives show 4.1% increase in speed, but the difference between alternatives is not quite noticeable because of the induced vehicle demand driven to the streets with improved traffic condition. The mode share changes occur for the benefit of subway ridership, because the study station is equipped with two subway line services. When mixed with parking supply restriction, the impact becomes clearer.

• Journal of Advanced Technology Convergence
• /
• v.2 no.4
• /
• pp.13-19
• /
• 2023

Following the signing of the Paris Agreement on Climate Change (UNFCCC, 2015), the world is expanding greenhouse gas reduction activities through comprehensive participation that includes not only developed countries but also developing countries. Major countries around the world are placing high expectations on the effectiveness of total carbon emissions regulation through the carbon emissions market. However, in order to obtain carbon credits, third-party verification is required based on quantitative carbon reduction data. Accordingly, in this paper, we developed an AIoT high-efficiency street light for carbon emissions and conducted a performance analysis study to measure the luminous efficiency of the lighting fixture. To obtain carbon emissions rights, we used high-efficiency LED PKG, developed our own high-voltage PFC, and developed high-efficiency lighting fixtures capable of communication. For communication, the 2.4GHz LoRa method was adopted between the lighting fixture and the gateway. Lens design was conducted through simulation of Korea Expressway Corporation's standard streetlight types A, B, and C. The performance of the streetlight was verified as being more efficient than other existing products through the measurement of luminous efficiency by an accredited rating agency, and it is expected that carbon emissions rights will be obtained by reducing electrical energy through this.