• Agricultural and Biosystems Engineering
• /
• 제1권1호
• /
• pp.7-15
• /
• 2000

Optimization was considered from three perspectives : minimum grain loss, minimum damaged grain loss, and minimum power consumption. Factors affecting combine performance were classified as control, adjustable, and environmental. Control and adjustable factors were optimized by the parameter design developed by Taguchi. Environmental factors were used as input for optimization. Optimum range for control and adjustable factors are presented. Parameter design was adequate to obtain the optimum levels of control factors and optimum range of adjustable factors.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.714-726
• /
• 1993

Optimization was considered from three perspectives ; minimum grain loss, minimum damaged grain loss, and minimum power consumption. Factors affecting combine performance were classified as control , adjustable , and environmental. Control and adjustable factors were optimized by the parameter design developed by Tajuchi. Environmental factors were used as input for optimization Optimum range for control and adjustable factors are presented. Parameter design was adequate to obtain the optimum levels of control factors and optimum range of adjustable factors.

• Journal of Magnetics
• /
• 제12권1호
• /
• pp.7-11
• /
• 2007

We confirm the validity of the analytic expression for the temperature of the Joule heated nano-wire [C.-Y. You et al. Appl. Phys. Lett. 89, 222513 (2006)] with finite element method. The temperature of the Joule heated nano-wire is essential information for the research of the current induced domain wall movement. The analytic expression includes an adjustable parameter which must be determined. Since the physical origin of the adjustable parameter is simplification of the heat source profile, the validity of the analytic expression must be examined for wide range of the nano-wire structure. By comparison with this analytic expression with the results of full numerical finite element method, the adjustable parameter has been determined. The numerically confirmed adjustable parameter values are in the range of 0.60$\sim$0.69, which is well matched with the theoretically expected one. Furthermore, it is found that the adjustable parameter is a slow varying function of the nano-wire geometry. Based on this numerical confirmation, we can apply the analytic expression for the wide range of the nano-wire geometry with proper adjustable parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.101-104
• /
• 1997

In this paper, we deal with a quadratic stabilization by $H^{\infty}$ output feedback controllers with adjustable parameters. The designed controller contains a contractive time-varying gain which can be used to adjust the responses of the resulting closed-loop system. The free parameter expressed as time-varying gain is chosen so that a Lyapunov function of the closed-loop system descends as fast as possible. A numerical example is given to show the validity of proposed method..

• 한국정보통신학회논문지
• /
• 제22권11호
• /
• pp.1455-1461
• /
• 2018

본 논문은 짝수 홀수 분해법에 기초한 가중된 선형 보간법(weighted Linear Interpolation; WLI) 커널 분석을 제안한다. 짝수 홀수 분해법은 기존에 알려진 CCI 보간법보다 복잡도가 낮고 개선된 화질을 제공해준다는 점에서 장점을 가지고 있다. 하지만 기존에는 EOD에 대한 커널이 부재했을 뿐 더러, 그에 대한 분석이 이루어지 않았기에 본 논문은 EOD에 대한 커널 식을 제공한다. EOD에 의해 짝 홀수로 나누어진 벡터에 대한 커널 식을 제공하고 최종적으로 두 벡터의 합인 EOD 커널식을 제공한다. 최종적으로 유도된 EOD의 커널 식은 매개변수 ${\omega}$에 의해 정의된다. ${\omega}$에 의해 정의된 커널 식이 WLI이며, 여기서 ${\omega}$는 보간 과정에 있어 성능을 좌우하는 역할로 사용된다. 또한 매개변수의 변화에 다른 커널의 형태의 변화에 관한 것도 제시한다. 또한, 매개변수에 대한 이해와 해당되는 커널의 형태 변화를 이해하기 위해서 실험과 토론을 제시한다.

• Journal of the Korean Statistical Society
• /
• 제27권3호
• /
• pp.251-264
• /
• 1998

When the LRT is not feasible, we define quasi-LRT(QLRT) as a modification of the LRT Under some appropriate conditions the QLRT shares Bahadur optimality and Bartlett Adjustability with the LRT. When we can find maximum likelihood estimator under the null parameter space but not under the unrestricted parameter space, our QLRT is Bahadur optimal as is the LRT We suggest the stopping rule of the Newton-Raphson iterations for constructing the QLRT statistics which are Bartlett adjustable.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권1호
• /
• pp.61-66
• /
• 2006

The simple Langmuir isotherm is frequently employed to describe the equilibrium behavior of protein adsorption on a wide variety of adsorbents. The two adjustable parameters of the Langmuir isotherm - the saturation capacity, or $q_m$, and the dissociation constant, $K_d$ - are usually estimated by fitting the isotherm equation to the equilibrium data acquired from batch equilibration experiments. In this study, we have evaluated the possibility of estimating $q_m$ and $K_d$ for the adsorption of bovine serum albumin to a cation exchanger using batch kinetic data. A rate model predicated on the kinetic form of the Langmuir isotherm, with three adjustable parameters ($q_m,\;K_d$, and a rate constant), was fitted to a single kinetic profile. The value of $q_m$ determined as the result of this approach was quantitatively consistent with the $q_m$ value derived from the traditional batch equilibrium data. However, the $K_d$ value could not be retrieved from the kinetic profile, as the model fit proved insensitive to this parameter. Sensitivity analysis provided significant insight into the identifiability of the three model parameters.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.351-356
• /
• 2001

In this paper, a general one-loop control system was assumed as a model system which has a time-delay element connected with a first order-lag element in series. After the corresponding parameter set causing stability limit condition for the model system was obtained by mathematical procedures, their loci on the parameter space was taken according of frequency change,. The parameter set loci of stability limit showed a specific pattern, and particularly the curves on the Kp-Ti parameter space were able to generalized in the form of an exponential formula. These properties were also compared with the results taken from experimental procedures by Nyquist response method and Ziegler & Nichols method on the time domain, and both results were confirmed to be nearly same.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.2053-2061
• /
• 1994

The static and fatigue tensile tests have been conduted to predict the fatigue life of 8-harness satin woven and plain woven carbon/epoxy composite plates containing a circular hole. A fatigue residual strength degradation model, based on the assumption that the residual strength for unnotched specimen decreases monotonically, has been applied to predict statistically the fatigue life of materials used in this study. To determine the parameters(c, b and K) of the residual strength degradation model, the minimization technique and the maximum likelihood method are used. Agreement of the converted ultimate strength by using the minimization technique with the static ultimate strength is reasonably good. Therefore, the minimization technique is more adjustable in the determination of the parameter and the prediction of the fatigue life than the maximum likelihood method.

• 대한전기학회논문지
• /
• 제37권10호
• /
• pp.740-747
• /
• 1988

This paper describes the parameter convergence property for an adaptive identifier and deals with the stability of the adaptive system in terms of the general error model. The Persistent Excitation (PE) condition to guarantee parameter convergence is derived using the Power Spectrum Analysis. In the adaptive identifier designed under the assumptions that the plant has not unmodelled dynamics, it can be shown that the equilibrium points of adjustable parameters are independent on the position or the number of input spectrums, if the adaptive signal is PE. When the plant contains unmodelled dynamics and the same controller is used, the PE condition can still hold but the parameter tuned values are changed with the spectrum.