• International Journal of Precision Engineering and Manufacturing
• /
• 제7권3호
• /
• pp.51-55
• /
• 2006

An adaptive tracking controller is presented for the vibration reduction of flexible manipulator employed in hazardous area by combining input shaping technique with sliding-mode control. The combined approach appears to be robust in the presence of severe disturbance and unknown parameter which will be estimated by least-square method in real time. In a maneuver strategy, it is found that a hybrid trajectory with a combination of low frequency mode and rigid-body mode results in better performance and is more efficient than the traditional rigid body trajectory alone which many researchers have employed. The feasibility of the adaptive tracking control approach is demonstrated by applying it to the simplified model of robot system. For the applications of the proposed technique to realistic systems, several requirements are discussed such as control stability and large system order resulted from finite element modeling.

• Smart Structures and Systems
• /
• 제13권4호
• /
• pp.587-614
• /
• 2014

In recent years the interest in online monitoring of lightweight structures with ultrasonic guided waves is steadily growing. Especially the aircraft industry is a driving force in the development of structural health monitoring (SHM) systems. In order to optimally design SHM systems powerful and efficient numerical simulation tools to predict the behaviour of ultrasonic elastic waves in thin-walled structures are required. It has been shown that in real industrial applications, such as airplane wings or fuselages, conventional linear and quadratic pure displacement finite elements commonly used to model ultrasonic elastic waves quickly reach their limits. The required mesh density, to obtain good quality solutions, results in enormous computational costs when solving the wave propagation problem in the time domain. To resolve this problem different possibilities are available. Analytical methods and higher order finite element method approaches (HO-FEM), like p-FEM, spectral elements, spectral analysis and isogeometric analysis, are among them. Although analytical approaches offer fast and accurate results, they are limited to rather simple geometries. On the other hand, the application of higher order finite element schemes is a computationally demanding task. The drawbacks of both methods can be circumvented if regions of complex geometry are modelled using a HO-FEM approach while the response of the remaining structure is computed utilizing an analytical approach. The objective of the paper is to present an efficient method to couple different HO-FEM schemes with an analytical description of an undisturbed region. Using this hybrid formulation the numerical effort can be drastically reduced. The functionality of the proposed scheme is demonstrated by studying the propagation of ultrasonic guided waves in plates, excited by a piezoelectric patch actuator. The actuator is modelled utilizing higher order coupled field finite elements, whereas the homogenous, isotropic plate is described analytically. The results of this "semi-analytical" approach highlight the opportunities to reduce the numerical effort if closed-form solutions are partially available.

• 지구물리와물리탐사
• /
• 제13권1호
• /
• pp.118-127
• /
• 2010

전기검층은 지층의 전기비저항을 측정하는 물리검층법으로 전극배열에 따른 전기비저항 변화에서 지층내의 수포화도를 평가하는데 이용된다. 전기검층은 시추공 효과 및 인접한 지층의 두께와 전기비저항 들에 의해 많은 영향을 받는다. 이러한 시추공 효과 및 인접 지층의 영향은 시추공 내에서 전기검층 손데가 중심으로부터 편향되었을 때 더 커진다. 노말검층 손데가 시추공 내에서 편향되었을 때, 단노말과 장노말 검층자료의 정확한 해석의 기초를 마련하기 위해 검층손데의 편향에 의한 전기검층 자료의 왜곡을 수치모델링을 이용하여 분석하였다. 이를 위해 노말검층 손데의 편향으로 인한 3차원적 기하학적 구조를 단순화 시킬 수 있는 새로운 좌표 체계를 제안하고, 이 좌표계에서 Fourier 급수 전개(Fourier series expansion)를 수행하였다. 여러 개의 서로 연동된 이차원 문제들을 풀기 위하여 이차원 hp goal-oriented high-order self-adaptive hp (h는 셀의 크기, p는 근사 차수를 의미) 유한요소법에 기초한 알고리즘을 적용하였다. 이 알고리즘은 모델링 영역 내에서 자동적으로 각 격자 셀에서의 h와 p를 바꿔가면서 최적의 격자를 생생하여 원하는 정밀도의 해를 도출할 수 있다. 수치모델링 결과, 이 연구에서 제안한 알고리즘으로 정확하고 신뢰성 있는 해를 얻을 수 있었다. 검층손데의 편향 영향은 시추공경이나 시추공 이수의 전기비저항이 큰 경우, 그리고 지층의 전기비저항이 낮은 경우에 큰 것을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.538-543
• /
• 2007

A procedure is proposed to generate optimal grid with minimal user intervention while keeping a prescribed level of accuracy, using an adaptive X-FEM and applied to shape optimization. In spite of various advantages of X-FEM, however, there are several obstacles for practical applications. Because of using a uniform background mesh and additional degree of freedoms for enrichment, an X-FEM is usually computationally more expensive than traditional finite element method. Furthermore, there are often accuracy problems. For an automatic procedure of optimal mesh generation, an h-adaptive scheme and a posteriori error estimation obtained by a post-processing process are utilized. The procedure is shown by 2-D shape optimization examples.

• 소성∙가공
• /
• 제15권3호
• /
• pp.189-194
• /
• 2006

In this paper, an automated adaptive mesh generation scheme, based on an advancing-front-Delaunay method, is presented fur finite element simulation of three dimensional bulk metal farming processes. Basic approach is introduced in detail, including a surface meshing and volume meshing technique and a mesh density control scheme. The presented approach is applied to automatic forging simulation in order to evaluate the effect of the developed schemes. Comparison shows a good agreement between required mesh density and generated mesh density, implying that the presented approach is appropriate for automatic mesh generation in metal forming simulation.

• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.577-588
• /
• 2018

A major concern in deep excavation project in soft clay deposits is the potential for adjacent buildings to be damaged as a result of the associated excessive ground movements. In order to accurately determine the wall deflections using a numerical procedure such as the finite element method, it is critical to use the correct soil parameters such as the stiffness/strength properties. This can be carried out by performing an inverse analysis using the measured wall deflections. This paper firstly presents the results of extensive plane strain finite element analyses of braced diaphragm walls to examine the influence of various parameters such as the excavation geometry, soil properties and wall stiffness on the wall deflections. Based on these results, a multivariate adaptive regression splines (MARS) model was developed for inverse parameter identification of the soil relative stiffness ratio. A second MARS model was also developed for inverse parameter estimation of the wall system stiffness, to enable designers to determine the appropriate wall size during the preliminary design phase. Soil relative stiffness ratios and system stiffness values derived via these two different MARS models were found to compare favourably with a number of field and published records.

• 한국철도학회논문집
• /
• 제2권3호
• /
• pp.46-53
• /
• 1999

In this paper, made was a study on a mesh generation method based on the pollution error. This method is designed for the control of the pollution error in any patch of elements of interest. It is a well-known fact that the pollution error estimates are much more than the local one. When the pollution error is significant, nothing can be said about the reliability of any estimator based on local computations in the patch. Reliable a posteriori error estimation is possible by controlling the pollution error in the patch through proper design of the mesh outside the patch. This design is possible by equally distributing the pollution error indicators over the mesh outside the patch. The mesh generated from the conventional feedback pollution-adaptive mesh generation algorithm needs many iterations. Therefore, the solution time is significant. But the remeshing scheme in the proposed method was used here. It was shown that the pollution-adaptive mesh improves the E.I., simply denoted as Effectivity Index, on the patch of interest, and the pollution error reduces less than the local error.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.16-23
• /
• 1997

The Reproducing Kernel Particle Method (RKPM), one of the popular meshless methods, is developed and applied to stress concentration problems. Since the meshless methods require only a set of particles (or nodes) and the description of boundaries in their formulation, the adaptivity can be implemented with much more ease than finite element method. In addition, due to its intrinsic property of multiresolution, the shape function of RKPM provides us a new criterion for adaptivity. Recently, this multiple scale Reproducing Kernel Particle Method and its adaptive procedure have been formulated for large deformation problems by the authors. They are also under development for damage materials and localization problems. In this paper the multiple scale RKPM for linear elasticity is presented and the adaptive procedure is applied to stress concentration problems. Therefore, this work may be regarded as the edition of linear elasticity in the complete framework of multiple scale RKPM and the associated adaptivity.

• 전산구조공학
• /
• 제9권3호
• /
• pp.145-155
• /
• 1996

이 논문은 평면 상의 영역 경계와 조절선(control curve)에 맞추어서 요소망을 자동 생성하는 알고리즘을 제시하는데 목적이 있다. 여기서 제안하는 알고리즘은 요소망 생성 영역의 경계와 조절선들을 하나의 수퍼 루프(super loop)로 연결하고, 루프(loop)위에 있는 두 절점을 연결하는 최소벌점(minimum penalty)의 경로를 따라서 순환적으로 분할하여 요소를 생성하는 기법에 바탕을 두고 있다. 이 방법은 요소망 생성영역의 형상에 제한이 없으며, 모든 과정을 쉽게 자동화 할 수 있기 때문에 복잡한 영역의 요소망을 최소한의 사용자 개입을 통해서 간편하게 처리할 수 있는 프로그램으로 쉽게 이행할 수 있다. 이 알고리즘은 곡면 요소망 생성이나, 적응적 요소망 생성등에 쉽게 확장하여 적용할 수 있다.

• 항공우주시스템공학회지
• /
• 제15권6호
• /
• pp.10-18
• /
• 2021

A flame deflector prevents a launch system from thermal damage by deflecting the exhaust flame of the launch vehicle. During the deflection of the flame, the flame deflector is subjected to a high-temperature and high-pressure flow, which results in thermal ablation damage at the surface. Predicting this ablation damage is an essential requirement to ensure a reliable design. This paper introduces a numerical method for predicting the ablation damage phenomena based on a one-way fluid-structure interaction (FSI) analysis. In the proposed procedure, the temperature and convective heat transfer coefficient of the exhaust flame are calculated using a fluid dynamics analysis, and then the ablation is calculated using a finite element analysis (FEA) based on the user-subroutine UMESHMOTION and Arbitrary Lagrangian-Eulerian (ALE) adaptive mesh technique in ABAQUS. The result of such an analysis was verified by comparison to the ablation test result for a flame deflector.