• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.703-706
• /
• 2000

The acoustic characteristics radiated from the acoustic transducer with metal-piezoceramic laminated circular plate were simulated. The Vibrational modes of metal-piezoceramic laminated circular plates were calculated by using the finite element method. After meshing the inside closed boundary of the acoustic transducer, the pressure gradients and the isotaric lines were calculated for the various frequencies. It has been observed that the characteristics of the sound pressure calculated for the various frequencies. Also, the directivity patterns and the sound pressure radiated from the acoustic transducer were calculated by 2-dimensional analysis.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.38-44
• /
• 2003

Artificial blasts, defined as seismo-acoustic events, were discriminated from natural earthquakes in the Korean Peninsula by the seismo-acoustic analysis. Total 197 seismo-acoustic events corresponding to 9 percent of seismic events in 2002 were analyzed and classified as artificial surface blasts. Events distribution pattern of the seismo-acoustic events in 2002 was similar to the previous result in 1999-2001, except for two regions. Newly determined seismo-acoustic events were added to the previous artificial blast database. To extend infrasound detection capability, new small-scale infrasound array(TJIAR) was installed in KIGAM. Preliminary analysis for the small array was conducted to discriminate artificial blasts in the southwestern part of the Korean Peninsula. The small array discriminated S seismo-acoustic events during short period analysis. And two infrasound arrays(TJIAR and CHNAR) were used to determine approximate sound source location by cross bearing method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.927-930
• /
• 2000

An acoustic feedback canceller has some problems that are difficult to remove the acoustic feedback through acoustic feedback path. In this paper, a new method of acoustic feedback cancellation scheme is proposed using spectral subtraction. Microphone input signals are subtracted by estimated feedback signals which are estimated by Wiener filter using the correlation between microphone input signals and output signals of receiver.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.123-126
• /
• 2002

Acoustic vibration analysis has been performed using random vibration analysis module of MSC/NASTRAN to evaluate the safety of the composite satellite antenna structure under the acoustic pressure from the launch vehicle. It was found that maximum $3\sigma$ stress by acoustic excitation was less than allowable stress.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.139-142
• /
• 2004

The object of the present work is the acoustic emission energy analysis of subambient pressure tri-pad slider. Head/disk interaction during start/stop and constant speed were detected by using acoustic emission (AE) test system The frequency spectrum analysis is performed using the AE signal obtained during the head/disk interaction Natural frequency analysis was performed using Ansys program. Acoustic emission energy was calculated for the slider modes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.735-740
• /
• 1998

Acoustic performance of DICT's acoustic laboratory was evaluated. As a result, background noise and inverse squre law of an anechoic room were satisfied with ISO 3745 standard value. Also, reverberation time and standard deviation of sound pressure level distribution in reverberation rooms were within maximum error limit that was ruled on ISO 3741.

• 한국군사과학기술학회지
• /
• 제2권1호
• /
• pp.82-89
• /
• 1999

In this article, the performances of acoustic enclosure with double resilient mount system which was designed by ADD to reduce the radiated noise by main noise source of ships, was tested and evaluated. From test results, it was verified that the acoustic performances of acoustic enclosure satisfied the requirements; vibration isolation level at 1st stage mount system of 15 ㏈ and airborne noise reduction level of 20 ㏈ in broad band.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.326-331
• /
• 1999

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.534-537
• /
• 2011

This Paper present prediction Vehicle Interior Noise using ATF(Acoustic Transfer Function) and engine radiated sound power. This is useful tool to qualifying the effectiveness of Air-borne noise Path. Furthermore This method provide acoustic package performance of the vehicle and able to prepare frequency band to same segment or benchmarking vehicle.

• 한국정밀공학회지
• /
• 제14권10호
• /
• pp.119-126
• /
• 1997

The relationship between the applied stresses and the change of elastic wave velocity has been established based on the acoustoelasticity theory. The non-uniform stress field in a loaded specimen has been evaluated from the surface acoustic wave velocity measured by the line-focus acoustic microscopy with the acoustoelastic constants obtained form a calibration test. The evaluated stresses are in good agreement with the results calculated by finite element method.