• 분석과학
• /
• 제35권5호
• /
• pp.218-227
• /
• 2022

A simple and fast throughput flow injection (FI) system with a merging-zone technique was designed to determine ferrous and ferric in an aqueous solution. The method is based on the direct reaction of ferrous with a Bathophenanthroline reagent (Bphen) in acidic media. The forming red complex absorbs light at 533 nm. All conditions of the flow injection system were investigated. The analytical curve of ferrous was linear in the range of 0.07 to 4 mg/L with an r² value of 0.9968. The detection and quantification limits were 0.02 and 0.04 mg/L, respectively. The molar absorptivity and Sandell's sensitivity were 4.0577 × 10⁶ L/mol cm and 25 × 10^-5 ㎍/cm², respectively. The homemade valve was low-cost with high repeatability (n = 7) at an RSD of 1.26 % and zero dead volume. The values of the dispersion coefficient were 2.318, 2.022, and 1.636 for the concentrations of 0.2, 1, and 3 mg/L, respectively. The analysis throughput of the designed flow injection unit was 57 sample per hour.

• 대한화학회지
• /
• 제47권3호
• /
• pp.213-219
• /
• 2003

일산화탄소가 포화된 수용액에 광촉매로서 산화아연을 용액 1 ml 당 0.4 mg의 양을 첨가한 다음, $25{\pm}0.1^{\circ}C$에서 253.7 nm의 자외선을 조사시켜 일산화탄소의 광화학적 변환반응을 연구하였다. 그 결과 일산화탄소가 포화된 수용액은 253.7 nm의 자외선에 의해 카르복실화반응과 카르보닐화반응이 진행되어 포름산, 옥살산, 글리옥실산, 포름알데하이드 및 글리옥살이 주로 생성되었다. 이들 화합물들의 생성은 용액의 pH값에 영향을 받았는데, 산성용액에서는 포름알데하이드와 글리옥살의 생성이 증가하였으나, 염기성용액에서는 오히려 감소하였다. 하지만 유기산의 경우에는 산성용액에서는 큰 변화가 없었으나, 포름산의 경우에는 11.5 이상의 pH에서 급격히 증가하였다. 반응의 결과 생성된 각 생성물들에 대한 초기양자수득율을 계산하였으며, 이들 결과로부터 산화아연이 포함된 일산화탄소 수용액의 광화학 반응에 대한 가능한 반응메카니즘을 제시하였다.

• 한국잠사곤충학회지
• /
• 제41권2호
• /
• pp.116-121
• /
• 1999

This study was aimed to explain the essence of Hydroxylammonium hydrochloride(H.A.) effect on degummed silk fiber increasing the colour sites due to oxime generating reaction. H.A. in aqueous solution caues to increase the amount of [H+] and reduce pH values as the concentration of H.A. increases. The rate of [H+] absorption of silk fiker in acidic solution differs on the basic of solution pH and shows a specific uptake in each pH, the lower the pH of solution, the higher the amount [H+] absorption. The pH of solution after treating of silk fiber in H.A. and HCl, showed more remaining [H+] in H.A. solution due to [H+] releasing under the procedure of oxime production. Also it was revealed that in higher concentration of H.A. the reaction for oxime fixation in silk fiber carried out stonger and as a result the bigger gap with acid uptake curve appeared. FT-IR analysis of silk fiber treated with H.A. revealed the creating of intermolecular H-bond at the 2,981-2.930 cm-1, which was not appeared for nontraeted silk fibers and shows H-bond between N-OH group in oue chain and C=) group in another chain of silk protein. Colourimetry of dyed silk fiber after H.A. tratment showed that the silk fiber treated with the high concentration of H.A. compare to low concentration, absorbed more dyeing molecules and so Showed less percontage of Whiteness.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.12-16
• /
• 2000

Silk and cotton fabrics were dyed with Parmelia tinctorium that is a kind of lichen. Dyeing solution was prepared by fermentation in aqueous ammonia solution. The effects of pH and temperature in dyebath on dyeability were investigated. The maximum K/S value of each dyed fabrics was showed in 480nm. Silk fabrics showed better dyeability than cotton. Silk fabrics dyed well in acidic or neutral dyebath at $80^\circ{C}$ and cotton fabrics in neutral dyebath at $50^\circ{C}$. Both of silk and cotton fabrics showed poor dyeability in basic dyebath because of colouring anionic groups in lichen. The Munsell values of dyed silk fabrics were appeared in R(red) range, and them of cotton fabrics in YR(yellow-red) range. Light fastnesses of dyed fabrics were as poor as 2 or 2-3 grades. Also, Laundering fastnesses of dyed silk fabrics were as poor as 2 grade and those of cotton fabrics were 3 or 3-4 grades. But dry-cleaning fastnesses of all dyed fabrics were good.

• Bulletin of the Korean Chemical Society
• /
• 제27권12호
• /
• pp.1989-1996
• /
• 2006

The $NiSO_4/CeO_2-ZrO_2 $catalysts containing different nickel sulfate and $CeO_2$ contents were prepared by the impregnation method, where support, $CeO_2-ZrO_2$was prepared by the coprecipitation method using a mixed aqueous solution of zirconium oxychloride and cerium nitrate solution followed by adding an aqueous ammonia solution. No diffraction line of nickel sulfate was observed up to 20 wt %, indicating good dispersion of nickel sulfate on the surface of $CeO_2-ZrO_2$. The addition of nickel sulfate (or $CeO_2$) to $ZrO_2$ shifted the phase transition of $ZrO_2$ from amorphous to tetragonal to higher temperatures because of the interaction between nickel sulfate (or $CeO_2$) and $ZrO_2$. A catalyst (10-$NiSO_4/1-CeO_2-ZrO_2$) containing 10 wt % $NiSO_4$ and 1 mole % $CeO_2$, and calcined at $600{^{\circ}C}$ exhibited a maximum catalytic activity for ethylene dimerization. The catalytic activities were correlated with the acidity of catalysts measured by the ammonia chemisorption method. The role of $CeO_2$was to form a thermally stable solid solution with zirconia and consequently to give high surface area, thermal stability and acidity of the sample.

• 한국재료학회지
• /
• 제16권1호
• /
• pp.63-67
• /
• 2006

The characteristics of the wet-etching of ZnO thin films were investigated using hydrochloric and phosphoric acid solutions as etchants. The etch rate of ZnO films, using highly diluted hydrochloric acid solutions at a concentration of 0.25% in deionized water, was determined to be about 120 nm/min, and linearly increased with increasing the acid concentration, resulting in $1.17{\mu}m/min$ when a 2% HCl solution was used. The surface of ZnO etched by an HCl solution, observed by scanning electron microscopy, showed a rough morphology with a high density of hexagonal pyramids or cones with sidewall angles of about ${\sim}45^{\circ}C$. Moreover, the sidewall angles of the masked area were similar to those of the pyramids on the surface. In comparison, the surface of ZnO etched by a phosphoric acid had a smooth surface morphology. The origin of this difference is from the very initial stage of etching, indicating that the etch-mechanism is different for each solution. Furthermore, when $H_3PO_4$ was added to the HCl aqueous solution, the morphology of the etched surface was greatly enhanced and the sidewall angle was also increased to about $65^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.657-664
• /
• 2004

Titanium sulfate supported on $TiO_2$was prepared by impregnation of powdered $TiO_2$with an aqueous solution of titanium sulfate followed by calcining in air at high temperature. For Ti$(SO_4)_2/TiO_2$ samples calcined at 300 $^{\circ}C$, no diffraction lines of titanium sulfate are observed at $Ti(SO_4)_2$loading up to 30 wt%, indicating good dispersion of $Ti(SO_4)_2$ on the surface of $TiO_2$. The acidity of the catalysts increased in proportion to the titanium sulfate content up to 20 wt% of $Ti(SO_4)_2$. 20 wt% $Ti(SO_4)_2/TiO_2$ calcined at 300 $^{\circ}C$ exhibited maximum catalytic activities for 2-propanol dehydration and cumene dealkylation. The catalytic activities for these reactions, were correlated with the acidity of catalysts measured by ammonia chemisorption method.

• 대한화학회지
• /
• 제38권5호
• /
• pp.351-358
• /
• 1994

셀렌이 촉매작용을 하는 반응을 이용한 수용액중 흔적량 셀렌의 분광광도법 정량에 관하여 검토하였다. 즉, 산성의 수용액 매질에서 셀렌에 의한 페닐히드라진의 촉매반응은 H-acid(8-아미노-1-나프톨-3,6-이슬폰산의 이나트륨염)과 반응하여 붉은 색의 아조 염료로 변하는 벤젠디아조뮴이온을 생성한다. 이 반응에 대해, 시약들의 가하는 양과 용액의 pH등과 같은 실험조건들을 최적화시켰다. 시료용액 15ml를 0.1 M EDTA용액으로 처리하여 철 등을 제거한 다음에 0.06 M 페닐히드라진 염산 1 ml, 0.02 M H-acid 1 ml, 및 0.3 M-$KClO_4$ 3 ml를 용액에 순서대로 가하였다. 염산으로 용액의 pH를 1.4로 조정하였다. 끓는 물중탕에서 30분간 가열한 다음, 식혀서 탈염수로 25.00ml되게 묽혔다. 흡광도 측정을 위한 바탕용액은 탈염수로 만들었다. 527nm에서 흡광도를 측정하였다. 위의 실험과정으로 표준검정곡선법에 의해 수도물, 강물, 및 저수지물 등의 물시료중 흔적량 셀렌을 정량하고, 시료들에 가해진 일정량의 셀렌을 정량하여 회수율을 구하였다. 이렇게 얻은 104 내지 111%의 회수율로부터 이 방법이 자연수중 ng/ml수준의 셀렌 분석에 정량적으로 응용될수 있음을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.595-598
• /
• 2011

Cetirizine hydrochloride reacted with $BiI_4^-$ in an acidic aqueous solution to form precipitate. After centrifugation, the atomic emission intensity of $Bi^{3+}$ contained in the supernatant solution was measured at the characteristic wavelength of 206.170 nm. The difference between the spectral signal intensity of the blank solution and that of the supernatant, ${\Delta}I$, was linearly related to the concentration of cetirizine hydrochloride. As a result, a new inductively coupled plasmaatomic emission spectrometric (ICP-AES) method was developed for the analysis of cetirizine hydrochloride. The linear range was from 27.7 to 184.8 $mg{\cdot}L^{-1}$, with a correlation coefficient (r) of 0.9961 and a detection limit of 9.6 $mg{\cdot}L^{-1}$. This method is simple and accurate, Without using toxic organic solvents, and is feasible for the quality control of cetirizine hydrochloride tablets and capsules.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1125-1128
• /
• 2002

Electrochemical capacitor made with metal oxide electrode uses rapid and reversible protonation/deprotonation of metal oxide material under the aqueous acidic solution, generally. Electrochemical stability window of aqueous electrolyte-type capacitor is narrow compared to that of organic electrolyte-type capacitor. Electrochemical characteristics of electrochemical capacitor made with metal oxide electrode and lithium cation based organic electrolyte were evaluated. Electrochemical capacitor based on $RuO_2$ electrode material and 1M $LiPF_6$ in mixed solvents of EC, DEC, and EMC has anodic and cathodic specific capacitance of 145 and 142 F/g-$RuO_2{\cdot}nH_2O$, respectively, by using cyclic voltammetry with scan rate of 2 mV/sec g-$RuO_2$ in potential range of 2.0~4.2V(Li|$Li^+$).