Abstract
The characteristics of the wet-etching of ZnO thin films were investigated using hydrochloric and phosphoric acid solutions as etchants. The etch rate of ZnO films, using highly diluted hydrochloric acid solutions at a concentration of 0.25% in deionized water, was determined to be about 120 nm/min, and linearly increased with increasing the acid concentration, resulting in $1.17{\mu}m/min$ when a 2% HCl solution was used. The surface of ZnO etched by an HCl solution, observed by scanning electron microscopy, showed a rough morphology with a high density of hexagonal pyramids or cones with sidewall angles of about ${\sim}45^{\circ}C$. Moreover, the sidewall angles of the masked area were similar to those of the pyramids on the surface. In comparison, the surface of ZnO etched by a phosphoric acid had a smooth surface morphology. The origin of this difference is from the very initial stage of etching, indicating that the etch-mechanism is different for each solution. Furthermore, when $H_3PO_4$ was added to the HCl aqueous solution, the morphology of the etched surface was greatly enhanced and the sidewall angle was also increased to about $65^{\circ}C$.
