• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1078-1080
• /
• 1995

The pulsed electro-acoustic method was used as a nondestructive measurement technique of spare charge distribution in dielectric materials. In our work presented here, we measured simultaneously the space charge distribution and conduction current in the low-density polyethylene samples with elevated temperatures up to $80^{\circ}C$ and electric field up to 20kV/mm. In the temperature less than $50^{\circ}C$, homocharges are mainly accumulated close to the electrodes under DC bias and after grounding. At the temperature exeeds $50^{\circ}C$, heterocharges are accumulated near the opposite electrode under DC bias. However after grounding the upper electrode, this charges immediately disappeared. The conduction current in LDPE at $20^{\circ}C$ and $30^{\circ}C$ was reduced slowly with increasing interval of applied voltage. But as temperature increased, the conduction current tended to increase slowly with the time and the degree of increase is enlarged.

• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.75-80
• /
• 2006

This paper introduces the mechanism of the ESD(electrostatic discharge) in the HDD spindle system using FDBs(fluid dynamic bearings). When a HDD(hard disk drive) spindle system is rotating, triboelectric charging occurs in the FDBs through the friction between the lubricant and the rotating shaft or between the lubricant and stationary sleeve. And this electrostatic charge is accumulated in the rotating parts of the HDD spindle system because they are insulated from the ground by the lubricant. This research shows experimentally that the behavior of electric charge and discharge in the FDB spindle system is the same as that of a capacitor. It also measures the electrostatic voltage difference between the rotating and stationary parts in the FDB spindle system due to the change of humidity, supporting load and motor speed. This research shows that the control of ESD is required in the HDD spindle system using FDBs, because the electrostatic charge accumulated in the FDB spindle system may cause the breakdown damage of the GMR head and data loss consequently.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.299-301
• /
• 1997

It was investigated that space charge characteristics of EPDM/XLPE laminates as a function of interfacial condition. There were no effects in charge accumulation characteristics at EPDM/XLPE laminate samples pasted treated silicone oil and silicone grease. But when the crosslinking coagent (TMPTA) was pasted in laminate samples, there was no space charge in interface of EPDM/XLPE laminate. There were no effects in the laminate sample pasted silicone grease dissolved crosslinking coagent. In the coupling agent pasted EPDM/ XLPE laminate sample, space charge was accumulated in XLPE side caused by coupling agent.

• 조명전기설비학회논문지
• /
• 제17권2호
• /
• pp.17-22
• /
• 2003

본 연구에서는 mP의 ADS 구동방식에서 초기화기간의 프라이밍 방전 특성에 대하여 실험적인 해석을 하였다. 방전에 의해 축적되는 벽전하의 총량과 벽전하가 축적되는 시간은 프라이밍 펄스의 폭과 무관하다. 또한 과잉 벽전하에 의한 자기소거 방전은 프라이밍 방전에 의한 벽전하량과 관계가 있으며 또한 프라이밍 방전에 의해 생성되는 공간전하와도 관계가 있다. 실험결과 프라이밍 펄스 폭은 8[$\mu\textrm{s}$], 전압은 163[V] 정도가 최적이다. 그리고 자기소거방전을 돕는 공간전하는 파라이밍 방전이 발생한 직후로부터 약 16[$\mu\textrm{s}$] 동안 존재한다. 그러므로 효과적인 초기화 과정을 위한 프라이밍 펄스의 폭은 16[$\mu\textrm{s}$] 이내가 적당하다.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.291-300
• /
• 2014

Purpose: The purpose of this study is to provide a statistical method from the data of ASRP's results and to apply to the reliability assessment of 155mm propelling charge, KM4A2. Methods: The accumulated data through ASRP for 155mm propelling charge were analyzed using regression analysis and MINITAB reliability analysis. The analysis methods used for this study were applied to statistical data types such as continuous data, binominal data. Results: The results of this study are as follows; The failure of 155mm propelling charge is mainly due to the broken charge bag, the decline of stabilizer content. The shelf-life(B5) regarding broken charge bag is 21.1years. The stabilizer content decrease with 0.0227%/year and safety storage period of propellant is 34.6years. Conclusion: The shelf-life of 155mm propelling charge determined by charge bag is estimated 21.1years.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.268-269
• /
• 2008

Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.96-100
• /
• 2001

We have measured the space charge distribution and PD patterns simultaneously in XLPE under AC voltages by modified PEA method in order to investigate the effect of space charge on PD patterns in XLPE with air-gap. From the experimental results, we found that the dynamic space charge accumulated on the surface of XLPE due to the PD dominantly affects the PD pattern in the dielectric-barrier structure and governs the voltage across the air-gap. Moreover, the space charge formed by applying DC voltage still remained after applying AC voltage, which means that the space charge formed during DC strength test is likely to be fatal to the long-time AC insulating characteristics of HV equipments. On the other hand, the PD patterns was much influenced by the pre-formed space charge by DC application. Therefore, it is possible to detect the effects of space charge by monitoring the infinitesimal change of PD patterns before and after DC strength.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.29-33
• /
• 2002

Period which does an electric condition of panel in reset in the driving method of PDP is reset period. This research experimentally analyzed the priming discharge characteristic of reset period. The amount of wall charge and the accumulation time accumulated by priming discharge are unrelated to width of priming pulse. And, self-erase discharge has the relation in the amount of wall charge by priming discharge. Then, it relates also to space charge generated by priming discharge. Moreover, space charge which helps self-erase discharge exists to about 22$mutextrm{s}$ after generating priming discharge. And, it is suitable within 12$mutextrm{s}$ of priming pulse width for efficient reset.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.374-374
• /
• 2010

Charge transfer mechanism of poly(4,4'-aminotriphenylene hexafluoroisopropylidenediphthalimide) (TP6F PI) which exhibits bistable ON and OFF switching has been studied using photoemission electron spectroscopy (PES) and near-edge x-ray absorption fine structure (NEXAFS). Here, we demonstrate novel set-up in which holes are injected by photoemission process instead of direct charge carrier injection via metal electrode. The accumulated charges on the PI surface in the OFF state abruptly flow across the PI film when the bias voltage of a back electrode reaches a specific value, indicating that the film is changed to the ON state. Core level and x-ray absorption spectra probed at charge injection region via photoemission process do not show any evidences implying structural modification of TP6F PI during the phase change. Whereas, in valence band spectra, the highest occupied molecular orbital (HOMO) is shifted toward Fermi level, responsible for improved hole-mobility of TP6F PI of ON state.

• 한국항만경제학회지
• /
• 제28권4호
• /
• pp.275-298
• /
• 2012

터미널은 운송에 있어 중요한 거점지역으로서 국가물류의 중추적 역할을 수행하고 있다. 따라서 물류의 원활한 흐름을 위해서는 터미널에 충분한 공간을 확보하여 화물의 반입 및 반출을 효율적으로 지원하여야 함에도 불구하고, 만약 파업이나 터미널 봉쇄 또는 장기체화 화물에 의해 화물처리를 위한 공간이 확보되지 못한다면 국가물류에 영향을 미칠 뿐 아니라 터미널운영자에게도 경영상 많은 피해가 발생할 것이다. 이러한 장기체화 화물로 인한 피해를 최소화하기 위하여 터미널운영자는 항만하역약관에 경과보관료에 관한 약관을 규정하고, 계약자에게 고율의 경과보관료를 부과함으로써 화물의 반출을 간접적으로 강제하고 있다. 그러나 하주와 터미널운영자 사이에 화물보관에 대한 계약이 직접적으로 존재하지 아니하는 경우, 과연 하주에게 부과하는 경과보관료가 정당한 것인가에 대한 의문이 제기될 수 있다. 이에 본 연구의 대상인 판례는 경과보관료와 관련된 법률적 쟁점에 대하여 법원이 최초로 사법적 판단을 한 것으로서 그 의의가 있다. 이 연구는 동 판례의 경과보관료에 대한 개념 및 민법상 묵시적 의사표시에 의한 계약의제 그리고 상관습에 따른 경과보관료 부과 당위성 등에 관한 법률적 쟁점을 고찰해보고자 한다. 아울러 특별법 형태의 터미널운영자 유치권 및 경매권에 대한 입법방안도 제시하고자 한다.