• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.710-713
• /
• 2004

The design, simulation, modeling and measurement of a low temperature co-fired ceramic (LTCC) RF switch module for GSM applications is presented in this paper. RF switch module is constructed using a Rx/Tx switching circuit and integrated low pass filter. The low pass filter function was designed to operate in th GSM band. Insertion and return loss of the low pass filter were designed less than 0.3 dB and better than 12.7 dB at 900 MHz. The RF switch module contained 10 embedded passives and 3 surface mount components integrated on $4.6{\times}4.8{\times}1.2$ nm, 6-layer multi-layer integrated circuit. The insertion loss of switch module was measured at 900 MHz was 11 dB.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.5
• /
• pp.404-410
• /
• 2014

The purpose of this study was to find the optimal arrangement of FPSO equipment in a module while considering the economic value and fire risk. We estimated the economic value using the pipe connections and pump installation cost in an HP (high pressure) gas compression module. The equipment risks were also analyzed using fire scenarios based on historical data. To consider the wind effect during a fire accident, fuzzy modeling was applied to improve the accuracy of the analysis. The objective functions consisted of the economic value and fire risk, and the constraints were the equipment maintenance and weight balance of the module. We generated a Pareto-optimal front group using a multi-objective GA (genetic algorithm) and suggested an equipment arrangement method that included the opinions of the designer.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.239-244
• /
• 2011

In this paper, we analyzed the electrical characteristics with crack pattern in crystalline solar cell. crystalline solar cells with a thin substrate, even small shocks can be easily damaged. Before the module goes through many processes, because the solar cells are at risk of a crack. That occurred early in the PV module micro-crack is not easily detection by eye test or output test. Because the EL (Electroluminescence) device has been detected using. PV module is made by laminated of a variety of materials. By different properties of each material will affect the crack. For this reason, the crack will grow and affect the output. And We analyzed the three crack patterns in crystalline solar cell. A growth of cracks on crystalline solar cell was interpreted by analysing generated cracks on the PV modules. Based on this interpretation, an electrical output value was calculated by mathematical modeling on electrical output characteristic with each crack patterns.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.809-817
• /
• 2020

In the design and development process of Small-Sat power distribution and transmission module, the stability of dynamic resources was evaluated by a deep learning algorithm. The requirements for the stability evaluation consisted of the power distribution function of the power distribution module and demand module to the SAR radar in Small-Sat. To verify the performance of the switching power components constituting the power module PDM, the reliability was verified using a dynamic neural network. The adoption material of deep learning for reliability verification is the power distribution function of the payload to the power supplied from the small satellite main body. Modeling targets for verifying the performance of this function are output voltage (slew rate control), voltage error, and load power characteristics. First, to this end, the Coefficient Structure area was defined by modeling, and PCB modules were fabricated to compare stability and reliability. Second, Levenberg-Marquare based Two-Way NARX neural network Sigmoid Transfer was used as a deep learning algorithm.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.143-148
• /
• 2011

This paper is about the study on MPPT algorithm of PV module where mismatched solar cells exist. PSIM simulation tool was used to verify new MPPT algorithm and PV module modeling was made. It was verified for the proposed algorithm to track the right MPP of PV boost converter under mismatched condition, which shows a shading effect in PV module. An experiment will be done soon using PV simulator for verification of the proposed algorithm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1436-1441
• /
• 2006

Each type of optical sheets in a LCD module experiences a characteristic behavior for thermal loading and unloading. During thermal cycling, a polymeric behavior is reversible and recyclable, depending on a material stiffness critically affected by temperature and time. Some critical issues on temperature- and time-dependent themomechanical deformation of the polymeric sheet are addressed by finite-element thermal results, followed by structural simulation results in this study.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.93-98
• /
• 2005

Silicon bipolar transistors (Si-BJT) are widely used in the telecommunication system such as short range wireless control and wireless indoor voice communication system. New modeling method for the internal current source model of Si-BJT is proposed. The proposed method based on new thermal resistance extraction method and new analytical expressions for the current source parameters of Si-BJT. The proposed method can directly extract the model parameters without any optimization procedure which is adopted in the conventional modeling method. The proposed method is applied to 5 finger $0.4\times20[{\mu}m^2]$ and the model shows good prediction of the measured data in $3[\%]$ of errors proving the validity of this method.

• Journal of KIBIM
• /
• v.4 no.3
• /
• pp.1-9
• /
• 2014

As BIM application continues to increase in civil engineering, in this study, 3D information model for RC(Reinforced Concrete) bridge pylon was developed and verified its effectiveness at the structural-design stage. To define 3D information model of RC A-Type pylon, characteristics of pylon were analyzed and 3D model structure was constructed. The 3D information model, one of the core product of BIM, manages all information generated during all life-cycle of a structure and consequently maximizes the efficiency of utilizing information. Also, this study proposes interface module between input data in structural analysis and 3D model of RC pylon. The module can create the input data for non-linear structural analysis. It is essential to study on method of developing 3D information model and propose a structural analysis model by utilizing 3D model for the effective use of BIM techniques in construction industry. The results of this study can be used as the base data for developing the 3D information model of RC pylon in the structural analysis field.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.12
• /
• pp.2098-2102
• /
• 2007

The conventional CCPU(Cable Covering Protective Unit) modeling methods which are used by Type 99 and Type 92 in EMTP simulation are firstly discussed in this paper, and then some problems of them are also investigated. Modeling method using Type 99 causes unstable characteristic at initial transient of CCPU operation. Time delay has also effect on the output of CCPU modeling. So, in this paper, a new modeling method for CCPU is designed by DBM(Data Base Module) of EMTP. The characteristic of Type 92 is used for the new modeling method. The reliability of this one is proved by comparing simulation with measured data. Specially, at initial transient, the waveform of the new method shows more stable result than that of conventional method using Type 99. Also, the peak value is similar to measured data.

• Journal of Korea Game Society
• /
• v.9 no.2
• /
• pp.95-104
• /
• 2009

The windows games and the console games that use DirectX occupied 20% or more of world game market and that are developed by C++ Language occupied 75% or more of the market. This study proposed that commonality and variability for code of the 20 projects based on DirectX and C++ is analysed and patternized, that common modules are created, and that modules are modeled. As a result of applying a case study, it is verified that the proposed model reduces effort in game development.