• 정보처리학회논문지D
• /
• 제11D권3호
• /
• pp.591-596
• /
• 2004

컴포넌트 소프트웨어 개발에서 양질의 컴포넌트를 추출하기 위해서는 사용자의 요구사항을 정확하게 표현할 수 있는 체계적인 모델링 방법이 필요하다. 피러나 컴포넌트는 일반적으로 객체 모델링을 기반으로 설계되고 개발되기 때문에 상호작용과 협력의 표현, 상속으로 인한 재사용 문제 등을 해결하는데는 한계가 있으며 복잡한 구조를 가진 대규모 시스템에서 컴포넌트를 추출하기에는 용이하지 않다. 따라서 객체 모델링을 보완하기 위하여 객체 중심이 아닌 객체의 역할을 중심으로 하는 역할 모델링 기법을 활용할 필요가 있다. 역할 모델링은 대체들의 패턴을 추상화하고 복잡한 대규모 시스템을 관계의 분리를 통하여 간단한 모델로 생성할 수 있도록 객체의 역할을 중심으로 모델링하는 기법이다. 본 논문은 UWL 기반에서 역할 모델링을 통하여 컴포넌트를 추출하는 방법을 연구한다. UML은 다양한 관점으로 모델을 표현하고 있으므로 다양한 관점의 역할 모델을 표현하여 컴포넌트를 추출하는데 활용할 수 있도록 한다.

• 지구물리와물리탐사
• /
• 제18권4호
• /
• pp.216-222
• /
• 2015

항공 전자 탐사법은 지하 천부의 전도성 광체 탐사를 위하여 이미 수십년 전에 도입되었다. 그러나 통상적인 시간 영역 항공 전자 탐사(ATEM) 시스템은 신호가 미약하여 가탐 심도에 한계가 있다. 최근 이러한 문제점을 극복하기 위하여 지상 송신원 시간 영역 항공 전자 탐사법(GREATEM)이 개발되었다. GREATEM은 지상에 설치된 긴 전선을 송신원으로 사용하는 준 항공 전자 탐사법이다. 항공 전자 탐사에서는 방대한 자료가 획득되므로, 계산 시간의 절감을 위하여 대개 1차원 해석 방법이 사용되고 있다. 그러나 GREATEM은 1차원 모델링의 경우에도 긴 전선을 따라 수치 적분이 필요하므로 루프 송신원을 사용하는 ATEM의 1차원 모델링에 비하여 계산 시간이 많이 걸린다는 문제점이 있다. 이 논문에서는 일반적인 1차원 모델링보다 비교할 수 없을 정도로 계산 속도가 빠른 ABFM법을 도입하여 ATEM 1차원 모델링을 수행하였다. 통상적인 모델링과 ABFM 결과를 비교한 결과, ABFM법은 GREATEM 1차원 모델링에도 적용 가능할 것으로 확인되었다.

• 한국HCI학회논문지
• /
• 제12권3호
• /
• pp.13-23
• /
• 2017

본 논문에서는 사용자의 편의성을 향상시킨 새로운 인 핸드 3D 모델링 시스템을 제안한다. 기존의 시스템은 사용자의 편의성이 낮은 문제점이 존재하여 물체를 손으로 들고 모델링을 진행하는 인 핸드 모델링 시스템이 연구되어 왔으나 손 제거를 위한 추가적인 장비가 필요하거나 특정 조건에서만 모델링이 가능한 문제가 발생하였다. 이에 본 논문에서는 자동 손 제거를 위한 접촉 상태 변화 감지 알고리즘과 정확한 정합을 위한 이상점 제어가 가능하고 색상정보를 추가적으로 이용하는 개선된 ICP 알고리즘을 제안한다. 제안된 알고리즘을 사용하면 추가적 장비나 어떠한 제한조건 없이 정확한 모델링이 가능하다. 본 논문에서는 실제 데이터를 이용한 실험을 통해 제안된 시스템을 활용하면 어떠한 제한 조건도 없는 일반적인 상황에서 정확한 모델링을 수행할 수 있음을 보였다.

• 대한산업공학회지
• /
• 제39권6호
• /
• pp.498-516
• /
• 2013

Combat Modeling and Simulation (M&S) is significant to decision makers who predict the next direction of wars. Classical methodologies for combat M&S aimed to describe the exact behaviors of combat entities from military doctrines, yet they had a limitation of describing reasonable behaviors of combat entities that did not appear in the doctrines. Hence, this paper proposed a synthesizing modeling methodology for combat entity models considering both 1) the exact behaviors using descriptive modeling and 2) the reasonable behaviors using prescriptive modeling. With the proposed methodology, combat entities can represent a reality for combat actions rather than the classical methodologies. Moreover, the experiment results using the proposed methodology were significantly different from the results using the classical methodologies. Through the analyses of the experiment results, we showed that the reasonable behaviors of combat entities, which are not specified in the doctrines, should be considered in combat M&S.

• 한국정보시스템학회지:정보시스템연구
• /
• 제31권4호
• /
• pp.25-45
• /
• 2022

Purpose In this paper, we propose the method to extend topic modeling techniques in order to derive data-based research hypotheses when establishing research hypotheses for social sciences, As a concept in contrast to the existing deductive hypothesis establishment methodology for the social science research, the topic modeling technique was expanded to enable the so-called inductive hypothesis establishment methodology, and an analysis case of the Seongsan Ilchulbong online review based on the proposed methodology was presented. Design/methodology/approach In this paper, an extension architecture and extension algorithm in the form of extending the existing topic modeling were proposed. The extended architecture and algorithm include data processing method based on topic ratio in document, correlation analysis and regression analysis of processed data for topics derived by existing topic modeling. In addition, in this paper, an analysis case of the online review of Seongsan Ilchulbong Peak was presented by applying the extended topic modeling algorithm. An exploratory analysis was performed on the Seongsan Ilchulbong online reviews through the basic text analysis. The data was transformed into 5-point scale to enable correlation and regression analysis based on the topic ratio in each online review. A regression analysis was performed using the derived topics as the independent variable and the review rating as the dependent variable, and hypotheses could be derived based on this, which enable the so-called inductive hypothesis establishment. Findings This paper is meaningful in that it confirmed the possibility of deriving a causal model and setting an inductive hypothesis through an extended analysis of topic modeling.

• 한국측량학회지
• /
• 제39권2호
• /
• pp.93-101
• /
• 2021

Recently, with the urban redevelopment and the spread of the planned cities, there is increasing interest in the wind environment, which is related not only to design of buildings and landscaping but also to the comfortability of pedestrians. Numerical analysis for wind environment prediction is underway in many fields, such as dense areas of high-rise building or composition of the apartment complexes, a precisive 3D building model is essentially required in this process. Many studies conducted for wind environment analysis have typically used the method of creating a 3D model by utilizing the building layer included in the GIS (Geographic Information System) data. These data can easily and quickly observe the flow of atmosphere in a wide urban environment, but cannot be suitable for observing precisive flow of atmosphere, and in particular, the effect of a complicated structure of a single building on the flow of atmosphere cannot be calculated. Recently, drone photogrammetry has shown the advantage of being able to automatically perform building modeling based on a large number of images. In this study, we applied photogrammetry technology using a drone to evaluate the flow of atmosphere around two buildings located close to each other. Two 3D models were made into an automatic modeling technique and manual modeling technique. Auto-modeling technique is using an automatically generates a point cloud through photogrammetry and generating models through interpolation, and manual-modeling technique is a manually operated technique that individually generates 3D models based on point clouds. And then the flow of atmosphere for the two models was compared and analyzed. As a result, the wind environment of the two models showed a clear difference, and the model created by auto-modeling showed faster flow of atmosphere than the model created by manual modeling. Also in the case of the 3D mesh generated by auto-modeling showed the limitation of not proceeding an accurate analysis because the precise 3D shape was not reproduced in the closed area such as the porch of the building or the bridge between buildings.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1363-1370
• /
• 1995

A nonlinear dynamic modeling method for simply supported structures undergoing large overall motion is suggested. The modeling method employs Rayleigh-Ritz mode technique and Von Karman nonlinear strain measures. Numerical study shows that the suggested modeling method provides qualitatively different results from those of the Classical Linear Cartesian modeling method. Especially, natural frequency variations and residual deformation due to membrane strain effects are observed in the numerical results obtained by the suggested modeling method.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.151-158
• /
• 2013

Large generator of power plant is very important. In order to protect large generator from faults, digital protective relay or IED is required. However, all protective relays for generators of the domestic power plant are operated by foreign products. And now, for technological independence from foreign and improvement of import substitution effect, IEDs using domestic technology are being developed. To evaluate performance of developing next-generation power devices, the study of the dynamic characteristics of the power plant, generator system modeling, fault simulation and analysis, should be considered. Specially, To obtain IEEE Standards COMTRADE format for relay operation test, generator system modeling and fault simulation using PSCAD/EMTDC tools must be preceded. Until now, a complete modeling of generator internal windings and fault simulation techniques dose not exist. In this paper, for evaluation performance of relay elements of developing IED, the generator system modeling and various faults simulation using PSCAD/EMTDC tools were performed. And then, the various transient phenomena through obtained relaying signal of developed modeling were analyzed.

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.119-131
• /
• 2011

To be integrated into the IEC 61970-based K-Grid, application of open communication protocol and sub-system modeling to major nodes is needed. In this paper, a module which links load nodes in customers to CIM based on psXML/oBIX, one of open protocols, was developed and data modeling and communication protocols of IEC 61850-7-42 based DER and ESS which apply the module to the customers who have DER and ESS were designed. Also the XML-based distributed database middleware was designed. The proposed modeling and protocols were applied to the building in which commercial DER products and the effectiveness of the proposed data modeling and the communication protocol were evaluated.

• Asia pacific journal of information systems
• /
• 제9권3호
• /
• pp.47-73
• /
• 1999

Nowadays, the modeling of information systems have been enabled by various models and methodologies that are used for different purposes and perspectives upon the systems. The integrated modeling methodology that integrates these models and methodologies has become important concerns in system integration such as CIM and PDM. The primary objective of this paper is to propose a comprehensive integrated modeling methodology that integrates the OOIDEFO function model, OOIDEFO information model, node model, user interface model, and organization model for an effective analysis, design and implementation for system integration. This methodology covers the generic requirements of modeling methodology such as graphical notations, modeling processes, and abstraction mechanisms. Also, this methodology uses an 00 paradigm throughout the entire systems development life cycle. In order to prove the consistency and efficiency of the proposed methodology, the CIMS for ship production is modeled and prototyped.