• Structural Engineering and Mechanics
• /
• v.88 no.5
• /
• pp.405-417
• /
• 2023

This paper reveals theoretical research to the nonlinear dynamic response and initial geometric imperfections sensitivity of the spinning graphene platelets reinforced metal foams (GPLRMF) cylindrical shell under different boundary conditions in thermal environment. For the theoretical research, with the framework of von-Karman geometric nonlinearity, the GPLRMF cylindrical shell model which involves Coriolis acceleration and centrifugal acceleration caused by spinning motion is assumed to undergo large deformations. The coupled governing equations of motion are deduced using Euler-Lagrange principle and then solved by a combination of Galerkin's technique and modified Lindstedt Poincare (MLP) model. Furthermore, the impacts of a set of parameters including spinning velocity, initial geometric imperfections, temperature variation, weight fraction of GPLs, GPLs distribution pattern, porosity distribution pattern, porosity coefficient and external excitation amplitude on the nonlinear harmonic resonances of the spinning GPLRMF cylindrical shells are presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.223-230
• /
• 2014

In this paper, the wind-induced response characteristics of freeform shaped tall building is studied by using FSI analysis. The analytical models are twist shaped ones at representing type of atypical tall building, and this study focused on the relationship between twist angle and wind acceleration. Firstly, 1-way FSI analysis is performed, so maximum lateral displacement of the analytical model for 100 years return period wind speed is calculated, then the elastic modulus of a structure that satisfies the constraints condition is evaluated. And 2-way FSI analysis is carried out. so acceleration of the analytical model for the evaluated modulus of elasticity and arbitrary density is predicted through time history analysis. The basic model is a set of a square shape, height is 400m, slenderness ratio is 8, and twist model is rotated at square model from 0 to 90 degrees at intervals of 15 degrees and from 90 to 360 degrees at intervals of 90 degrees. According to the result of predicting wind acceleration by the shape of each model, the wind vibration effect of square shape model is confirmed to be sensitive more than a twist shape ones.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.287-289
• /
• 2004

Tilting train has been developed to increase the operational speed of the trains on conventional lines which have many curves. This train are tilted at curves to compensate for unbalanced carbody centrifugal acceleration to a greater extent than compensation produced by the track cant, so that passengers do not feel centrifugal acceleration and thus trains can run at higher speed at curves. This paper investigated train formation of TTX(tilting train express) with maximum operation speed 180 km/h.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.04a
• /
• pp.233-240
• /
• 1997

Seven kinds of hysteric model were used and classified three groups considering the absorbing capacities of strain energy for each model. Four kids of each model. Four kinds of strong motion earthquake record (two of them were recorded in Japan and the others in U.S.A) are used. The yield strength of building was set in the ratio to the maximum input acceleration (Yield Strength / Maximum Acceleration = 0.5~3.0). Natural periods of structures were varied 0.1~3.0 second with an interval of 0.1 second. First group : Elastic-Plastic model, Ramberg-Osgood model Second group : Degrading Tri-liner model, Takeda model Third group : Slip model, Origin model, Max-D model Elastic-plastic response spectra were calculated for response velocities, displacement, energy input, ductility factors, accumulated ductility factors. The equivalent response values of M.D.O.F systems against S.D.O.F system were calculated to compare the relationship of two systems.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.635-643
• /
• 2011

The purpose of this study was to examine the effects of goal-setting on Eco-driving behaviors. An additional purpose was to examine whether setting goals on target behaviors has spread effects on non-target Eco-driving behaviors. Three office workers who drive regularly participated in this study. An AB multiple baseline design was adopted. After baseline (A), participants set goals on two or three target behaviors(e.g., over speeding, put the gears in neutral, extreme acceleration) (B). Results showed that goal-setting was effective in increasing the targeted Eco-driving behaviors. In Addition, most of the non-target Eco-driving behaviors(e.g., extreme break, extreme acceleration) increased.

• Journal of the Korean Society of Safety
• /
• v.26 no.6
• /
• pp.124-129
• /
• 2011

The purpose of this study was to examine the effects of goal-setting on Eco-driving behaviors. An additional purpose was to examine whether setting goals on target behaviors had spread effects on non-target eco-driving behaviors. Three office workers who drive regularly participated in this study. An AB multiple baseline design was adopted. After baseline (A), participants set goals on two or three target behaviors(e.g., over speeding, put the gears in neutral, extreme acceleration) (B). Results showed that goal-setting was effective in increasing the targeted eco-driving behaviors. In addition, most of the non-target eco-driving behaviors(e.g., extreme break, extreme acceleration) increased.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.207-213
• /
• 2019

The fuel-cut coast-down driving mode is activated when the acceleration pedal is released with transmission gear engaged, and it's a default function for electronic-controlled engine of vehicles. The fuel economy becomes better because fuel injection stops during fuel-cut driving mode. A fuel-cut detection method is suggested in the study and it's based on the speed, acceleration and road gradient data from GPS sensor. It detects fuel-cut driving mode by comparing calculated acceleration and realtime acceleration value. The one is estimated with driving resistance in the condition of fuel-cut driving and the other is from GPS sensor. The detection accuracy is about 80% when the method is verified with road driving data. The result is estimated with 9,600 data set of vehicle speed, acceleration, fuel consumption and road gradient from test driving on the road of 12km during 16 minutes, and the road slope is rather high. It's easy to detect fuel-cut without injector signal obtained by connecting wire. The detection error is from the fact that the variation range of speed, acceleration and road gradient data, used for road resistance force, is larger than the value of fuel consumption data.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.21 no.5
• /
• pp.237-244
• /
• 2017

This study proposes a numerical model to explain the closely placed double modes in the vibration of a layered stone pagoda system. The friction surface between the stones is modelled as the Timoshenko finite element while each stone layer is modelled as a rigid body. It is assumed that the irregular asperity on the friction surface enables the stone to be excited. This results in the closely placed modes that are composed of natural modes and self-excited modes. To examine the validity of the proposed model, a set of modal testing and analysis for a layered stone pagoda mock-up model has been conducted and a set of closely placed double modes are extracted. Applying the extended sensitivity-based system identification technique, the various system parameters are identified so that the modal parameters of the proposed numerical model are the same with those of the experimental mock-up. For a horizontal impulse excitation, the simulated acceleration responses are compared with measurements.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.175-178
• /
• 1997

This study was carried out to obtain an analytical expression for the specifications of the Stewart Platform that minimize the maximum force acting on the hydraulic cylinder. The position and orientation of the platform were calculated by means of the inverse kinematic analysis. The maximum force to be exerted on a cylinder was calculated using the Newton's second law for the case when the platform is moved along a horizontal axis with 0.6 g, the maximum translational acceleration possible. This paper suggests a mathematical model to minimize the maximum actuating force using radius and angle ratios as design variables. Finally, a fuzzy set for the minimum actuating force is proposed for this dynamic optimal design problem.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.232-235
• /
• 1999

In this paper, we present a coprocessor that can operate with ARM microprocessors. The coprocessor supports IEEE 754 standard single- and double-precision binary floating point arithmetic operations. The design objective is to achieve minimum-area, low-power and acceleration of processing power of ARM microprocessors. The instruction set is compatible with ARM7500FE. The coprocessor is written in verilog HDL and synthesized by the SYNOPSYS Design Compiler. The gate count is 38,115 and critical path delay is 9.52ns.