• 대한음성학회지:말소리
• /
• 제67호
• /
• pp.121-133
• /
• 2008

To estimate directions of multi-sound sources, we consider an approach based on zero crossings which provided more robust results to diffuse noise than the conventional cross-correlation-based method [6][7]. In reverberant environments, the performance of source direction estimation can be improved by using signal components through direct paths from sources to microphones. Since a cepstral prefiltering technique [8] removes the effect of reverberation, we propose a source direction estimation method which can find out intervals of the direct-path components by comparing original and cepstral-prefiltered envelopes. Simulations demonstrate that the proposed method can improve the performance of source direction estimation in reverberant environments.

• 소음진동
• /
• 제10권5호
• /
• pp.880-885
• /
• 2000

In a verical type, vibratory gyroscope, the coupled motion between the reference and sensing vibrations causes the zero-point output which means non-zero sensing vibration without angular velocity. This structural coupling leaks to an inherent discrepancy between the natural frequencies of the reference and sensing oscillations, causing the degradation of the sensing performance and dynamic stability. In this paper, the dynamic characteristics associated the coupling phenomenon are theoretically analyzed. Effects of reference frequency and coupling factor on the rotational direction and amplitude of elliptic oscillation are studied. A technique to predict the existence of curve veering of crossing in frequency trajectories is introduced to apply the design of micro gyroscopes with decoupled structures.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.915-924
• /
• 2016

A digital self-sustained phase shift modulation (DSSPSM) strategy that allows for good soft switching and dynamic response performance in the presence of step variations is presented in this paper. The working principle, soft switching characteristics, and voltage gain formulae of a LLC converter with DSSPSM have been provided separately. Furthermore, the method for realizing DSSPSM is proposed. Specifically, some key components of the proposed DSSPSM are carefully investigated, including a parameter variation analysis, the start-up process, and the zero-crossing capture of the resonant current. The simulation and experiment results verify the feasibility of the proposed control method. It is observed that the zero voltage switching of the switches and the zero current switching of the rectifier diodes can be easily realized in presence of step load variations.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1131-1138
• /
• 2015

This study presents an input-powered high-efficiency interface circuit for energy harvesting systems, and introduces a zero standby power design to reduce power consumption significantly while removing the external power supply. This interface circuit is composed of two stages. The first stage voltage doubler uses a positive feedback control loop to improve considerably the conversion speed and efficiency, and boost the output voltage. The second stage active diode adopts a common-grid operational amplifier (op-amp) to remove the influence of offset voltage in the traditional comparator, which eliminates leakage current and broadens bandwidth with low power consumption. The system supplies itself with the harvested energy, which enables it to enter the zero standby mode near the zero crossing points of the input current. Thereafter, high system efficiency and stability are achieved, which saves power consumption. The validity and feasibility of this design is verified by the simulation results based on the 65 nm CMOS process. The minimum input voltage is down to 0.3 V, the maximum voltage efficiency is 99.6% with a DC output current of 75.6 μA, the maximum power efficiency is 98.2% with a DC output current of 40.4 μA, and the maximum output power is 60.48 μW. The power loss of the entire interface circuit is only 18.65 μW, among which, the op-amp consumes only 2.65 μW.

• 한국수자원학회논문집
• /
• 제30권3호
• /
• pp.225-233
• /
• 1997

부체의 장주기동요, 연안구조물과 계류선의 파괴 등과 같은 역기능으로 인해 파군현상의 정확한 해석은 시급한 과제라 하겠다. 본고에서는 연안계에서 발생하는 파랑과 가장 근접한 비선형불규칙 파랑계를 산정하여 해안구조물의 피로거동에 지대한 영향을 미치는 파군당 파랑의 수와 해안구조물의 first excursion failure mode를 결정하는 high run에서의 파랑수를 중심으로 파군현상을 해석하였다. 해석과정에 mapping technique과 유의파경사를 perturbation parameter로 섭동이론이 사용되었다. 해석결과 Gaussian wave계에서 균등분포하는 것으로 알려진 위상함수는 평균값 주위에 집중분포하였고, 그 정도는 비선형성이 증가할수록 심화되었다. threshold crossing rate의 경우 비선형성이 심화될수록 평균해수위보다 큰 쪽으로 분포형이 이동하였으며 파군당 파랑수와 high run에서의 파랑수도 비슷한 경향을 보여 최근 설치범위가 심해쪽으로 확대되는 해안구조믈의 경우 피로거동에 대한 보강이 요만된다.

• 한국해안·해양공학회논문집
• /
• 제29권5호
• /
• pp.239-246
• /
• 2017

현장에서 파고와 주기만을 관측한 경우 주로 개별파 분석법을 사용하여 다양한 파랑 특성을 산정한다. 본 논문에서는 MATLAB 언어를 이용하여 개별파 분석 프로그램을 개발하였다. 영점 상향 교차법과 영점 하향 교차법을 이용하여 1) 평균해면 보정, 2) 영점 교차 시간 산정, 3) 개별파고 산정, 4) 자료 관측기간 변화 등의 기능을 수행할 수 있다. 해모수 1호에 설치된 레이더(WaveGuide Radar)를 사용하여 관측된 시간간격 0.2초 자료를 대상으로 개발된 프로그램의 적용성을 검토하였다. 조석성분 제거 및 영점 교차 시간 산정은 선형 혹은 2차원으로 내삽하였다. 개별 파고 산정은 Goda 방법이 적정한 것으로 판단되었으며, 본 연구에서 제안한 방법은 차후 후속 연구를 통하여 개선할 여지가 있는 것으로 판단된다. 대표파의 특징은 샘플의 유한성 등으로 인하여 영점상향교차법과 영점하향교차법으로 산정한 결과가 상이하다는 것을 알 수 있다.

• 한국가시화정보학회지
• /
• 제2권1호
• /
• pp.32-38
• /
• 2004

A new PIV technique was developed for decreasing optical error which was created during simultaneous measurements of velocity fields at a wall-normal plane and wall-parallel plane by a plane PIV and a Stereo-PIV systems. For experimental study, two different Reynolds number based on momentum thickness, Re$_{ =514 and 934 were generated in a blowing type wind tunnel under the condition of zero pressure gradient. The two Nd:Yag laser systems and three CCD cameras were synchronized. to obtain instantaneous velocity fields at the same time. To avoid optical noise at the crossing line by the two laser light sheets, a new optical arrangement using polarization was applied. The obtained velocity fields show the existence of hairpin packet structure vividly and the idealized hairpin vortex signature is confirmed by experiment.

• 한국산림과학회지
• /
• 제88권4호
• /
• pp.485-489
• /
• 1999

1994년의 참나무류 교잡종자에 관하여 발아율 및 그후의 생육상황을 조사하였다. 저장화분의 교배에서 발아율이 zero인 조합이 많은 경향을 보였다. 2년 후의 생존율 및 묘목의 수고생장은 교배 조합에 따라서 차이가 있었다. 1991년과 1993년의 교배묘의 생육상황을 조사하였고, 5년생 묘목의 생존율은 71~100%, 3년생 묘목의 생존율은 33~100%였다. 교배 조합에 따라서 생존율에 차이가 보였으며, 생장(生長)이 저조한 왜성묘목(矮性苗木)이 많은 조합에서는 고사율(枯死率)이 많았다. Q. aliena를 교배모수(交配母樹)로 한 경우 5년생의 생장(生長)이 가장 우수하였다. 특히 Q. aliena ${\times}$ Q. serrata가 167.9cm(5년생)이고 Q. dentata ${\times}$ Q. aliena는 120.2cm(3년생)으로 생장(生長)이 양호(良好)하였다.

• 전자공학회논문지B
• /
• 제29B권8호
• /
• pp.44-53
• /
• 1992

In this paper, a matching method is proposed to improve the correct matching rate in stereo correspondence matching in which the fingerprint of zero-crossing points on the scale-space is used as the robust matching feature. The dynamic programming, which is appropriate for the fingerprint feature, is introduced for correspondence matching. We also improve the matching rate by using the post-processing for correcting mismatched points. In simulation, we apply the proposed algorithm to the synthetic and real images and obtain good matching results.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1993년도 학술논문발표회 논문집 제12권 1호
• /
• pp.88-92
• /
• 1993

In speech signal processing, it is necessary to detect exactly the pitch. The algorithms of pitch extraction which have been proposed until now are difficult to detect pitches over wide range speech signals. Thus we propose a new algorithm which uses the G-peak extraction to do it. It is the method that finds the most MZI(maximum zero-crossing interval) at each frame and convolve it with speech signal ; this is the same with passing speech signals to variable LPF. Finally we obtained the pitch, improve the accuracy of pitch detection and extract it with the high speed.