The artificial increase in the solar intensity incident on solar cells using lenses or mirrors can allow solar cells to generate equivalent power with a lower cost. There are two types of concentration optics for solar energy conversion. One is to use mirrors, and the other is to use Fresnel lenses. The gains that can be achieved with a Fresnel lens or a parabolic mirror are compared. The result showed the gains are comparable and the two configurations were developed competitively. In application areas of Fresnel lenses as solar concentrators, several variations of design were devised and tested. Some PV systems still use commercially available flat Fresnel lenses as concentrators. A convex linear Fresnel lens to improve the concentration ratio and the efficiency is devised and flat linear Fresnel lens in thermal energy collection is utilized. In this study, we designed and optimized flat Fresnel lens and the 'light pipe' to develop 500X concentrated solar PV system. In the process, we compare the transmission efficiencies according to groove types. We performed rigorous ray tracing simulation of the flat Fresnel lenses. The computer aided simulation showed the 'grooves in case' has the better efficiency than that of 'grooves out case'. Based on the ray-trace results we designed and manufactured sample Fresnel lenses. The optical performance were measured and compared with ray-trace results. Finally, the optical efficiency was measured to be above 75%. All the design and manufacturing were performed based on that InGaP/InGaAs/Ge triple junction solar cell is used to convert the photon energy to electrical power. Field test will be made and analyzed in the near future.
동적 세기조절방사선치료 시 선량률 변화에 따른 다엽콜리메이터의 엽의 위치를 반영하는 선량학적엽간격과 다엽콜리메이터 투과계수 변화를 분석하여 다엽콜리메이터의 정확성을 평가하고자 하였다. Millennium 120 MLC 시스템이 장착된 선형가속기의 6 MV와 10 MV X선으로 물 팬텀의 깊이 10 cm에서 CC13과 FC-65G 전리함을 이용하여 선량률을 200, 300, 400, 500, 600 MU/min으로 변화시켜 선량학적엽간격과 다엽콜리메이터 투과계수를 측정하였다. 400 MU/min의 선량률 기준으로 200, 300, 400, 500, 600 MU/min으로 선량률을 변경하여 선량학적엽간격 값을 측정한 결과, 6 MV의 경우 각각 -2.59, -1.89, 0.00, -0.58, -2.89%의 차이가 나타났고, 10 MV에서는 각각 ?2.52, -1.69, 0.00, +1.28, -1.98%의 차이가 나타났다. 다엽콜리메이터 투과계수는 두 종류의 에너지와 모든 선량률에서 약 ${\pm}1%$ 이내의 범위로 측정되었다. 본 연구는 동적 세기조절방사선치료 시 선량률 변화에 대하여 다엽콜리메이터의 선량학적엽간격과 투과계수 변화를 평가하였다. 선량률 변화에 따라서 다엽콜리메이터의 투과계수의 차이는 미미했지만, 선량학적엽간격의 차이는 큰 것으로 확인하였다. 따라서 동적 세기조절방사선치료 시 임의로 선량률을 변경하면 종양에 전달되는 선량에 많은 영향을 미치므로 치료 중에 선량률을 변화시키지 않는 것이 더욱 정확한 방사선치료 방법이라 사료된다.
현대시대는 환자에 대한 의료제도가 의료서비스 개념으로 변화되고 있다. 이렇게 인간의 권리가 높아지고 환자가 고객이 되는 시대로 변화됨으로써 환자의 권리나 요구도 날로 증가되고 있으며 이를 바탕으로 여러 가지 병원 시스템도 환자의 편의나 요구에 맞춰지고 있는 것이 현실이다. 이로 인해 일반촬영 검사 중 Portable 검사의 Case도 점차 증가하고 있는 추세이다. Portable 검사의 Case가 증가하면서 병실, 중환자실, 수술실, 회복실에서 Portable검사로 인하여 주변 환자들의 원하지 않는 의료 피폭이 발생하기 때문에 법적으로도 이를 규제하고 있다. 실제로 진단용 방사선 발생장치의 안전관리에 관한 규칙 중 방사선 방어시설의 검사기준에서 "수술실, 응급실 또는 중환자실 외의 장소에서 촬영할 경우 반드시 이동형 진료용엑스선 방어칸막이를 갖추어야 한다."고 명시되어 있지만 이는 거의 시행되어지지 않고 있다. 따라서 X-ray Potable 검사를 통해 주변 환자가 받는 피폭선량을 알아보고 피폭선량 감소 방안을 알아보고자 하였다. 본 연구는 Mobile Portable 장비에서 Collimator 주변을 차폐하여 차폐 전과 후의 선량 변화, Portable tube와 Collimator의 각도 변화에 따른 차폐 전과 후의 선량 변화, 환자 침대의 거리변화에 따른 차폐 전과 후의 선량 변화를 각각 측정한 뒤 차폐효과를 알아보았다. 연구 결과 Collimator 주변을 차폐한 후 선량 변화는 차폐하지 않았을 때보다 약 20%의 차폐효과를 보였다. Portable 검사 중 비 차폐 시 각도가 $0^{\circ}C$, $90^{\circ}C$, $45^{\circ}C$ 순서로 피폭선량이 증가하였으며, 각도를 주었을 때 Collimator 주변을 차폐하면 피폭 선량은 감소하였다. 또한 환자 침대 거리는 비 차폐 시 0.5m보다 1m에서 피폭선량이 현저히 감소하였고 침대 간 거리 변화 시 Collimator 주변 차폐 후 선량 변화는 감소하였다. 주변 환자 피폭선량 감소 측면에서 볼 때 침대거리를 가능한 멀리 떨어뜨리는 것이 가장 좋은 방법이며 차폐효과가 약 100% 내외로 상당한 효과를 볼 수 있다. 그 다음은 Collimator를 차폐하는 방법으로 차폐효과가 약 20% 정도를 나타내며, 각도를 제한하는 방법으로 약 10% 내외의 효과를 나타낸다. Portable 검사 시 환자 피폭선량을 감소하기 위해 가능한 환자 및 보호자를 적정거리 이상으로 이동시킨 후에 실시하는 것이 가장 좋겠지만 환자가 움직일 수 없고 침대가 고정되어 있는 상태에서는 Collimator 주변을 차폐하는 방안을 제안한다. 또한 검사를 시행할 때 tube와 Collimator의 각도를 가능한 90도로 시행하도록 하고 90도가 안될 경우는 0도로 시행하되 45도는 가능한 지양하도록 한다. 방사선관계종사자들은 Portable 검사에서 위와 같은 결과들을 인식하고 실제 본인에게 적용시켜야 하며 효율적인 방사선 방어와 피폭선량을 감소시킬 수 있는 방안에 대한 노력과 연구에 힘써야 할 것으로 사료된다.
목적: CT기반 감쇠보정 영상의 표준섭취계수(Standard Uptake Value:SUV)가 $^{137}Cs$ 기반 감쇠보정 영상의 SUV보다 높다. 이 연구에서는 이러한 오차가 생기는 원인을 밝히고자 감쇠계수가 정확하게 변환되었는지 여부를 관심영역 분석을 통하여 평가하였다. 대상 및 방법: Philips GEMINI PET/CT는 X-ray CT (평균 40 keV) 혹은 $^{137}Cs$ (662 keV) 투과영상을 감쇠보정에 이용하는데 GEMINI PET/CT에서 사용하는 각각 선원의 에너지는 511 keV에서 얻은 감쇠계수와 틀리기 때문에 스캐너 내부에 장착된 감쇠계수 변환 알고리즘을 이용하여 511 keV에 해당하는 감쇠계수 값으로 변환된 감쇠지도를 사용하므로 감쇠계수의 변환이 정확하게 이루어졌는지 평가하는 것이 중요하다. 각각의 실험과정은 다음과 같다. 먼저 시스템 성능평가 팬텀 CT 투과 영상을 사용하여 Hounsfield units (HU)값을 측정하였다. 다음으로 NEMA 타원형 ECT 팬텀의 CT, $^{137}Cs$ 투과영상을 얻어 $^{68}Ge$ 투과선원을 장착한 Siemens ECAT EXACT 47 PET 스캐너에서 얻은 팬텀 투과 영상과 비교하여 감쇠계수가 511 keV에 해당하는 감쇠계수로 잘 변환되었는지 측정하였고 Gammex 467 electron density CT 팬텀의 CT, $^{137}Cs$ 투과영상에서 관심영역 분석을 하여 다양한 전자밀도 값에 대한 감쇠계수 변환의 정확성을 평가하였다. 또, 재구성한 영상에 미치는 영향을 평가하기 위하여 정상 및 병적 조직에서 CT, $^{137}Cs$ 기반 감쇠계수와 표준섭취계수를 비교하였다. 결과: CT에서 측정한 HU는 신뢰할 수 있는 값임을 확인하였으나 전자밀도와 원자번호가 큰 영역에서 CT 기반 감쇠계수에 오차가 있었는데 NEMA 타원형 ECT 팬텀 실험결과에 의하면 뼈 영역에서 오차는 11%이었다. 임상데이터에서도 마찬가지로 CT를 이용하여 얻은 감쇠계수가 $^{137}Cs$을 이용하여 얻은 감쇠계수보다 낮았고 전자밀도와 원자번호가 큰 영역에서 오차가 컸다. 그러나, 표준섭취계수는 $^{137}Cs$를 사용하여 감쇠보정을 한 영상의 값이 CT를 이용하여 감쇠보정을 한 값보다 오히려 낮았고 표준섭취계수의 백분율 차이는 $6.6{\sim}52.7%$이었다. 결론: CT의 HU가 정확함에도 불구하고 뼈 영역에서 CT 투과영상을 기반으로 한 감쇠계수의 변환이 부정확하고 CT 및 $^{137}Cs$ 투과영상을 기반으로 얻은 표준 섭취계수에 차이가 있으므로 이에 관한 추가적인 연구가 필요할 것으로 생각한다.
본 논문에서는 RF 고전력 스트레스에 의한 SAW 디바이스의 신뢰성 분석을 위하여 향상된 내전력 시험시스템 및 시험방법을 제안하고 고장분석을 통해 고장메카니즘을 분석하였다. 광학현미경, SEM(Scanning Electron Microscope) 및 EDX(Energy Dispersive X-ray Spectro-scopy)장비를 이용하여 고장 분석한 결과, SAW 디바이스의 고장메카니즘은 고전류 밀도 및 고온 조건에서 줄열에 의한 Electromigration으로 분석하였다. Electromigration은 IDT전극에 void와 hillock을 생성하고, 그 결과로 전극이 단락과 단선되어 삽입손실이 증가하는 것이다. 제안된 내전력 시험시스템과 방법을 이용하여 450MHz CDMA용 SAW 필터의 가속수명시험을 수행하고, 아이링 모델과 와이블 분포를 이용하여 SAW 필터의 $B_{10}$수명은 98,500시간으로 추정하였다.
As intellectual terror threats increase, we feel the limit in coping with those threats and the things we do are placing traditional X-ray machines & ETD and increasing aviation security staffs. In fact, even if air transportation system is the fast and most efficient transportation methods, it is true that there are many inconveniences to endure due to terror threats. In the name of security, even if we make a lot of efforts and time to screen both good-natured passengers, baggage, cargo and suspicious passengers, it is impossible to screen perfectly and it is not an efficient methods. Therefore, we introduce profiling system that reduce the effort to screen good-natured passengers but focus on screening dangerous passengers and baggages. Profiling system strengthens aviation security, using the concept "Selection & Concentration". Israel started to introduce manual profiling system in aviation security, which is interviewing suspicious passengers and it has been used in crime investigation since 1960. And it has been upgraded and diversified to CAPPS(Computer Assisted Passenger Screening Program) and SPOT(Screening Passenger by Observation). So, this theses is to study on the concept & kind of profiling and profiling methods adopted in airlines. Also it presents the method of introduction of profiling system in Korea and the necessity of making law on it.
본 연구는 고효율의 광촉매 제조와 그것의 환경적 응용에 관한 것이다. 가시광 영역에서도 $TiO_2$와 유사한 빛 흡수와 광분해속도를 갖는 나노 광촉매를 제조하였고, 낮은 온도에서도 활성 높은 rutile상이 형성하는 $TiO_2$ 광촉매를 제조하여 $SiO_2$위에 분산시켰다 또한, 광촉매에 적용 가능한 바인더와 안정한 $TiO_2$ 광촉매 졸을 제조하였다. 이와같은 물질들은 자외선/가시광선 분광광도계, X선 회절분석기, SEM, 광촉매활성 측정과 $TiO_2$ 코팅 표면의 물성으로 평가하였다. 이 결과들은 공기정화를 위하여 POF나 금속판을 이용하는 효율적인 광촉매 시스템에 적용 할 수 있다.
Polyurethane-ureas(PUUs) were prepared from 4,4'-methylenebis(cyclohexyl isocyanate) and various diols including isosorbide. Isosorbide is starch-derived monomer that exhibit a wide range of glass transition temperature and are therefore able to be used in many applications. PUU was synthesized by a pre-polymer polymerization using a catalyst. Successful synthesis of the PUU was characterized by fourier transform-infrared spectroscopy. Thermal properties were determined by differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. It was found that by tuning isosorbide content in the resin, their glass transition temperature(Tg) slightly decreased. Physical properties were also determined by tensile strength and X-ray diffraction. There is no significant differences between petroleum-derived diol and isosorbide in XRD analysis. Moreover, their physical and optical properties were determined. The result showed that the poly(tetramethylene ether glycol)/isosorbide-based PUU exhibited enhanced tensile strength, transmittance, transparency and biodegradability compared to the existing diols. After 11 weeks composting, the biodegradability of blends increased in ISB-PUU. The morphology of the fractured surface of blend films were investigated by scanning electron microscopy.
본 연구는 자동노출제어장치(Automatic Exposure Control, AEC)와 수동노출 이용 시 입사표면선량(Entrance Surface Dose, ESD)과 Entropy를 분석하여 자동노출제어장치의 유용성에 대해 알아보고자 하였다. 실험방법은 Skull, Chest, Abdomen, Pelvis 부위에 대하여 란도팬텀(Rando Phantom)에 반도체 선량계를 위치시켜 선량을 측정하였고, 동시에 획득한 DICOM(Digital Imaging and Communications in Medicine) 파일을 Matlab으로 Entropy 분석을 하였다. 그 결과 자동노출제어장치 이용 시 모든 부위의 입사표면선량이 수동노출보다 낮았고 Entropy 수치는 높았으며, paired t-test는 p<0.05로 유의한 차이가 있음을 알 수 있었다. 결론적으로 자동노출제어장치의 사용은 X선 검사 시 발생할 수 있는 불필요한 방사선량과 정보의 손실량을 줄여서 피폭선량과 영상 화질의 최적화에 기여할 수 있는 유용한 방법이 될 수 있다.
We prepared a CsPbI2Br solution using Cesium iodide (CsI), Lead (II) bromide (PbBr2) and Lead (II) iodide (PbI2) materials into a polar solvent mixture of N,N-dimethylformamide (DMF) and Dimethyl sulfoxide (DMSO). A simple spin coating technique was used for the fabrication of CsPbI2Br absorber layer in the solution process. In order to prepare uniform coating of absorber film we adopted a hot-air process in assocation with the spin coating. It was confirmed that the thin film manufactured by the hot-air process had a higher absorption rate than that without it, and the optical band gap was measured 1.93 eV. The thin film of absorber was uniformly prepared and revealed the Black α-Cubic crystal phase as proved through X-ray diffraction analysis. Finally, a perovskite solar cell having an n-i-p structure was manufactured with a CsPbI2Br perovskite absorption layer. From the solar cell, we obtained a power conversion efficiency (PCE) of 5.97% in a forward measurement.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.