• Title/Summary/Keyword: Working Mode

Search Result 301, Processing Time 0.027 seconds

The Design Feature of Self-work Model Senior Cohousing Projects in Denmark (덴마크 자치관리모델(Self-work Model) 노인용 코하우징의 디자인 특성)

  • 최정신
    • Journal of the Korean Home Economics Association
    • /
    • v.41 no.4
    • /
    • pp.1-19
    • /
    • 2003
  • In Scandinavian countries, where the society experienced change of typical nuclear family structure and higher vocational activity rates of married women earlier than East Asian countries, cohousing scheme has been evolved as an alternative housing to reduce housework for working women, and to reduce loneliness of elderly people who stay in their own homes. They can promote active mutual relationship among residents in the community. Korean family structure has been stemmed to more like extended family, but the tendency to live independently from their married children is getting more and more common in new cohort of senior citizens who are active, healthy, economically stable and higher educated. Korea has been industrialized rather rapidly since 1970's and faces to many societal phenomena about quality of life for senior citizens. Introduction of alternative housing solution for these senior citizens is necessary in Korea. In this paper, Danish senior cohousing scheme, particularly, self-work model project is described about its design feature in accordance to site planning, common facility, and dwelling unit. Aiming to mutual support and more frequent social contacts among residents, self-work model cohousing scheme has different design concept from the service mode scheme. Information about design feature of senior cohousing was collected from the published data with drawings and from field survey to 10 exiting projects in Denmark. Of those, 5 projects were described as a case study. It, hopefully, could provide practical information for architectural design when establishment of senior cohousing schemes start in Korea in the near future.

A frequency Domain based High Resolution Positioning Method using Low Rate ADC in LR-WPAN (LR-WPAN에서 저속 ADC를 이용한 주파수 영역상의 고해상 무선 측위 기법)

  • Lee, Won-Cheol;Park, Woon-Yong;Hong, Yun-Gi;Choi, Sung-Soo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.34 no.2C
    • /
    • pp.145-152
    • /
    • 2009
  • Ultra-wideband communication systems for impulse radio have merits that are possible for either high resolution ranging system or radio determination. Conventionally, in order to accomplish these functions, the rapid analog to digital convertor (ADC) is necessary to apply radio determination system operating in time domain. However, considering that low rate - wireless personal area network (LR-WPAN) aims to low-cost hardware implementation, the expensive ADC converting GHz sampling per second is not appropriate. So, this paper introduces the high resolution ranging system operating in frequency domain with using low sampling rate ADC, and a new non-coherent ranging scheme utilizing analog Frequency Modulation (FM) mode for the frequency domain transformation. To verify the superiority of the proposed ranging algorithm working in frequency domain, the suggested IEEE 802.15.4a TG channel model is used to exploit affirmative features of the proposed algorithm with conducting the simulation results.

Behavior Analysis of a Self Excited Induction Generator with Various Loads for a Hybrid Electric Propulsion System (하이브리드 전기추진시스템 구축을 위한 SEIG의 출력 특성 분석)

  • Yang, Joo-Ho;Choi, Gyo-Ho;Lee, Jae-Min;Jeong, Seok-Kwon
    • Journal of Power System Engineering
    • /
    • v.22 no.1
    • /
    • pp.41-47
    • /
    • 2018
  • This paper analyzes the output characteristics of a self excited induction generator with isolated mode according to change of its speeds and loads for building a hybrid electric propulsion system in special purpose ships by using power take off. The induction generators are being considered as an alternative choice to the well-developed generators because of their lower unit cost, inherent ruggedness, operational and maintenance simplicity. However, the generator working by stand alone has a few problems that the reactive power is required to establish the air gap magnetic flux, and the induced voltage and magnetizing current fluctuate when the load is varied. In spite of its advantages, basic design data of the capacitor bank and behaviors of the output characteristics of the generator are not sufficient for the system. Based on the operating condition(speed range of main engine) of the target boat, a reduced experimental equipment system was constructed to analyze the output characteristics of the SEIG. And a suitable capacitor bank of a stand-alone generator and its output characteristics under various loads was investigated in detail through these experiments. According to the experimental result, it was confirmed that the capacitor bank should be $70{\mu}F{\sim}100{\mu}F$, and the proper SEIG induced voltage should be DC 80 V ~ 250 V in order to storage electrical energy into a battery.

A Study on the Factors affecting Child Adjustment (아동의 초기 유아원 적응에 영향을 미치는 변인 연구)

  • 김지은
    • Journal of the Korean Home Economics Association
    • /
    • v.34 no.4
    • /
    • pp.119-131
    • /
    • 1996
  • The relationship of maternal separation anxiety, availability of support system and child gender to initial preschool adjustment was examined. Data were collected on 72 middle-class Korean children(35 boys, 37 girls) between the ages of 31 months and 60 months who were entering preschool. Subjects were from intact families, all with non-working mothers. Mothers completed the Maternal Separation Anxiety Scale(MSAS) and indicated the number of extended family members in the home as an index of social support. Classroom teachers completed the Preschool Behavior Questionnaire (PBQ) for each child after the first 2 weeks and again after 6 weeks of school. Each child was observed by the research team during the first 2 weeks of school and again after the 6th-week using the Child Observation System (COS). Applying the COS observed behavior was classified as being in the dependent, neutral, or active mode. All instruments were culturally relevant as validated by Korean experts. Maternal Separation Anxiety was a significant predictor for girls only, accounting for 11% of initial COS variance (p=<.05). In contrast, social support was a significant predictor for boys only, accounting for 28% of initial PBQ variance when entered after MSAS(p=.005). A significant difference between initial and 6th-week adjustment was obtained in the expected direction on the COS with behavior improving with time (t=-4.06, p=.001). Although a significant difference between initial and 6th-week PBQ adjustment was also obtained (t=-3.63, p=.001), it was not in the direction expected, problematic behavior were found to increase with time. Cultural and developmental factors help explain the findings. Given the patrilineal social system in Korea, boys are highly preferred over girls. Thus the at-home support system, comprised primarily of grandparents, may have a significant influence on school adjustment particularly of first-born sons. In contrast, since girls are viewed as fragile and vulnerable, mothers may express greater separation anxiety about girls. Finally, as would be expected, older children may be able to develop coping skills more readily than younger ones, as child adjustment on the COS significanlty improved over the 6-week period.

  • PDF

Repair of Pre-cracked Reinforced Concrete (RC) Beams with Openings Strengthened Using FRP Sheets Under Sustained Load

  • Osman, Bashir H.;Wu, Erjun;Ji, Bohai;Abdulhameed, Suhaib S.
    • International Journal of Concrete Structures and Materials
    • /
    • v.11 no.1
    • /
    • pp.171-183
    • /
    • 2017
  • Strengthening reinforced concrete (RC) beams with openings by using aramid fiber reinforcement polymers (AFRP) on the beams' surfaces offers a useful solution for upgrading concrete structures to carry heavy loads. This paper presents a repairing technique of the AFRP sheets that effectively strengthens RC beams, controls both the failure modes and the stress distribution around the beam chords and enhances the serviceability (deflection produced under working loads be sufficiently small and cracking be controlled) of pre-cracked RC beams with openings. To investigate the possible damage that was caused by the service load and to simulate the structure behavior in the site, a comprehensive experimental study was performed. Two unstrengthened control beams, four beams that were pre-cracked before the application of the AFRP sheets and one beam that was strengthened without pre-cracking were tested. Cracking was first induced, followed by repair using various orientations of AFRP sheets, and then the beams were tested to failure. This load was kept constant during the strengthening process. The results show that both the preexisting damage level and the FRP orientation have a significant effect on strengthening effectiveness and failure mode. All of the strengthened specimens exhibited higher capacities with capacity enhancements ranging from 21.8 to 66.4%, and the crack width reduced by 25.6-82.7% at failure load compared to the control beam. Finally, the authors present a comparison between the experimental results and the predictions using the ACI 440.2R-08 guidelines.

Analysis of Higher Order Structure of 5S rRNA from Pseudomonas alcaligenes by using Pb(Ⅱ) Ion (Pb(Ⅱ) 이온을 이용한 Pseudomonas alcaligenes 5S rRNA의 고차원 구조 분석)

  • Kim, Sangbumn;Lee, Younghoon;Park, Inwon
    • Journal of the Korean Chemical Society
    • /
    • v.39 no.6
    • /
    • pp.453-458
    • /
    • 1995
  • We have applied Pb2+ to the structural analysis of 5S rRNA from Pseudomonas alcaligenes. The mode of Pb2+-induced clevage on 5S rRNA has shown several specific features which may be utilized for the examination of tertiary structure of 5S rRNA: Pb2+ does not attack the stable helical stems; single stranded regions or bulges are attacked in variable susceptibilities depending on the positions of the sequences or the bases on the molecule; unstable helical region d is not attacked at all; only 3' sided strand of unstable helical stem C is weakly attacked, leaving 5' sided strand unattacked. Based on the Pb2+ cleavage properties and the structural analysis of Xanthomonas celebensis 5S rRNA, we have proposed a working hypothesis for the tertiary interactions in 5S rRNA.

  • PDF

Using TPC Model to Understand Broadband Diffusion in Korea (TPC(Technology, Policy and Culture) 모델을 이용한 한국의 초고속인터넷 확산 요인 분석)

  • Kum, Heisung
    • Informatization Policy
    • /
    • v.17 no.3
    • /
    • pp.74-97
    • /
    • 2010
  • This paper investigates factors that have facilitated the rapid diffusion of broadband in South Korea. It finds that the quick spread of broadband access in South Korea is the result of combining the government's strategic ICT policy considering cultural traits, businesses'competitive efforts, and the timely explosion of domestic demand for IT service. This paper also discusses the impact of broadband diffusion on the digital divide. It finds that although there are still regional and age gaps in broadband access, the Korean government and businesses are working to alleviate these problems through various ways from systemic to physical ones. While the deployment of broadband cannot eliminate every issue of the digital divide, broadband access minimizes the digital divide by lowering the barrier to inequitable access to information. This paper concludes with a number of recommendations that address selected policy issues related to the spread of broadband Internet for its successful implementation.

  • PDF

A Concurrent MCMA-DD Equalizer with Initial Convergence Detection (초기 수렴 검출 기능을 갖는 동시 MCMA-DD 등화기)

  • Kim, Chul-Min;Choi, Ik-Hyun;Oh, Kil-Nam;Choi, Soo-Chul
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • v.9 no.2
    • /
    • pp.477-480
    • /
    • 2005
  • CMA-DD is proposed to improve the steady-state performance of CMA and its performance is depending on switching time between two modes of operation. Castro et al. who proposed a concurrent equalizer for solving problem of CMA-DD, which reduced the sensibility of switching time. However, concurrent algorithm has a problem that it keeps working after convergence. In this paper, we propose concurrent MCMA-DD equalizer combined modified CMA(MCMA) and DD mode for making better concurrent algorithm. The proposed equalizer is better than previous algorithm in convergence speed and steady-state performance. Also, the proposed algorithm decides optimum switching time using residual ISI of the equalizer output.

  • PDF

Design and Realization of a Digital PV Simulator with a Push-Pull Forward Circuit

  • Zhang, Jike;Wang, Shengtie;Wang, Zhihe;Tian, Lixin
    • Journal of Power Electronics
    • /
    • v.14 no.3
    • /
    • pp.444-457
    • /
    • 2014
  • This paper presents the design and realization of a digital PV simulator with a Push-Pull Forward (PPF) circuit based on the principle of modular hardware and configurable software. A PPF circuit is chosen as the main circuit to restrain the magnetic biasing of the core for a DC-DC converter and to reduce the spike of the turn-off voltage across every switch. Control and I/O interface based on a personal computer (PC) and multifunction data acquisition card, can conveniently achieve the data acquisition and configuration of the control algorithm and interface due to the abundant software resources of computers. In addition, the control program developed in Matlab/Simulink can conveniently construct and adjust both the models and parameters. It can also run in real-time under the external mode of Simulink by loading the modules of the Real-Time Windows Target. The mathematic models of the Push-Pull Forward circuit and the digital PV simulator are established in this paper by the state-space averaging method. The pole-zero cancellation technique is employed and then its controller parameters are systematically designed based on the performance analysis of the root loci of the closed current loop with $k_i$ and $R_L$ as variables. A fuzzy PI controller based on the Takagi-Sugeno fuzzy model is applied to regulate the controller parameters self-adaptively according to the change of $R_L$ and the operating point of the PV simulator to match the controller parameters with $R_L$. The stationary and dynamic performances of the PV simulator are tested by experiments, and the experimental results show that the PV simulator has the merits of a wide effective working range, high steady-state accuracy and good dynamic performances.

Photovoltaic Generation by Parallel Driving of Modified Buck-boost Converter (변형된 승강압 컨버터의 병렬구동에 의한 태양광발전)

  • Lee Hee-Chang;Park Sung-Jun;Park Soo-Sik;Moon Chae-Joo;Lee Man-Hyung;Kim Jong-Dal
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.9 no.5
    • /
    • pp.457-466
    • /
    • 2004
  • In this paper, a modified converter is presented and analyzed to use as a photovoltaic converter. And also a new parallel driving scheme is proposed to increase output power and to reduce the output voltage ripple. The ratio of the output to the input voltage of the modified converter is equal to that of the boost converter. The difference between both converters is the composition of output terminal. Owing to the discrepancy, a working voltage of the output capacitor of the modified converter becomes lower, thus the capacitance value of the capacitor can be smaller than that of the boost converter. The proposed parallel driving is based on the modified converter and a current-mode-control method. It gives a good solution for alleviating the current sharing unbalance problem of conventional parallel operations. It reduces the output voltage ripple by means of increasing the equivalent switching frequency without additional switching losses. The validity of the proposed parallel driving strategy is verified through computer-aided simulations and experimental results.