• 제목/요약/키워드: Work Intensity

검색결과 781건 처리시간 0.03초

구기자혹응애(Eriophyes ruro KISHIDA) 및 그 혹(Gall)에 관한 연구 II. 혹의 성장에 따르는 효소활성 및 화학성분에 대하여 (Studies on Eriophyes kuko KISHIDA and its Galls -On the Activity of Enzymes and the Chemical Constituents in Growing Galls-)

  • 김창효;기우경;성낙계;박우철
    • 한국응용곤충학회지
    • /
    • 제10권1호
    • /
    • pp.23-30
    • /
    • 1971
  • 구기자혹응애(Eriophyes kuko KISHIDA)의 침입기에 의하여 구기자나무(Lycium chineens MILL.)외 잎형성된 혹(mite gall)의 생화학적 성질을 구명할 목으로 몇 가지 효소의 활성도, 화학성분의 함량 및 호량 등에 관하여 실험한 바 다음과 같은 결과를 얻었다. Catalase와 peroxidase 활성도는 건전한 잎의 직보다 혹 조직에서 높았으며 혹이 점차로 커짐에 따라 활성도도 높아졌다. 2. 조효소의 phosphorylase 활성도는 큰 혹(matured gall) 조직과 건전한 잎의 조직에 있어서 차이가 없었으나 활성 측정에 미치는 다른 효소의 영향을 고려하면 건전한 잎의 조직이 높은 것 같으며, phosphomonoesterase의 활성도는 건전한 잎의 조직보다 큰 혹 조직이 5배 가까이 높았으며 $\beta-amylase$와 invertase 등의 활성도는 큰 혹 조직이 2배 가까이 높았다. 3. 조단백질 함량은 혹의 발생 형성초기인 작은 혹일때는 $20\%$ 정도 건전한 잎의 조직보다 증가하였으나 혹이 점차 커 짐에 따라 감소하는 경향을 나타내었으며, 환원당은 자은 측일 에는 약간 감소하는 경향이었으나 혹이 점차 커짐에 따라 증가하였다. 인과 tannin의 함량도 혹이 점차커짐에 따라 증가하여를 혹이 건전한 잎보다 2배정도 많았다. 4, 호흡에 있어서 $QO_2$는 혹 조직이 건전한 잎보다 높았으나, $QCO_2$는 반대로 건전한 잎이 높았으며, RQ는 혹 조직이 낮았다.

  • PDF

An Empirical Approach to Dosimetric Effect of Carbon Fiber Couch for Flattening Filter Free Beam of Elekta LINAC

  • Ahn, Sohyun;Park, Kwangwoo;Kim, Jinsung;Lee, Ho;Yoon, Jeongmin;Lee, Eungman;Park, Sohyun;Park, Jeongeun;Kim, Juhye;Keum, Ki Chang
    • 한국의학물리학회지:의학물리
    • /
    • 제27권4호
    • /
    • pp.220-223
    • /
    • 2016
  • Generally, it is recommended that the dosimetric effect of carbon fiber couch should be considered especially for an intensity-modulated therapy with a large portion of monitor units from posterior angles. Even a flattening filter free (FFF) beam has been used for stereotactic body radiation therapy (SBRT), the effect of carbon fiber couch for FFF beam is not well known. This work is an effort to evaluate the dosimetric effect of carbon fiber couch for flattened and FFF beam of Elekta linac empirically. The absorbed doses were measured with Farmer type chamber and water-equivalent phantoms with and without couch. And differences of the absorbed doses between with and without couch defined as "couch effect". By comparing calculated dose in treatment planning system (TPS) with measured dose, the optimal density of couch was evaluated. Finally, differences on patient's skin dose and target dose by couch were evaluated in TPS. As a result, the couch effect for 6 and 10 MV flattened beam were -2.71% and -2.32%, respectively. These values were agreed with provided data by vendor within 0.5%. The couch effect for 6 and 10 MV FFF beam were -3.75% and -2.80%, respectively. The patient's skin dose was increased as 18.6% and target dose was decreased as 0.87%, respectively. It was realized that the couch effect of FFF beam was more severe than that of flattened beam. Patient's skin dose and target dose were changed by the couch effect.

충청권 소재 코스닥 상장 기업들의 가치 극대화를 위한 재무적 요인 분석 (Financial Analyses for Value Maximization of KOSDAQ Listed Firms in Chungcheong Province in the Korean Capital Market)

  • 김한준
    • 한국산학기술학회논문지
    • /
    • 제21권10호
    • /
    • pp.440-453
    • /
    • 2020
  • 국내 자본시장에서 충청권 지역의 최근의 경제 혹은 재무적인 여건 변화들을 기준으로, 동 지역에 대한 해외 및 국내 투자 규모는 향후에도 지속적으로 증가 할 것으로 예상된다. 이와 같은 전례 없는 변화된 환경을 고려하여, 본 연구에서는 동 지역권 소재 기업들의 가치 제고를 위한 3가지의 주요한 재무적 지표들, 즉, 기업의 수익성, 성장률 및 자본구조에 대한 종합적인 상호 비교 분석을 위하여, 각 재무적 지표들을 구성하고 있는 각각의 요인들이 실증적으로 검정되었다. 실증연구를 수행하기 위한 연구 설정 방법과 관련하여, 검정 결과와 관련하여, 시장 가치 기준의 부채비율, 성장률, 토빈 Q 비율, 사업위험도 그리고 연구개발비 비중 등의 총 5 가지 변수들이 충청권 지역에 속한 기업들의 수익성을 결정하는 유의한 재무적 요인들로서 판명되었다. 또한, 기업 성장률과 자본구조의 재무적 지표들을 분석한 결과, 수익성과 기업 규모의 2가지 변수들이 국내 자본시장 내에서 해당지역과 타 비교지역들 소재의 기업들을 통계적으로 구분하는 유의성있는 요인으로 판명되었다. 본 연구의 결과를 기준으로, 상기 서술된 재무적 지표들에 영향을 줄 수 있는 해당 요인들의 수준을 실무적으로 조정할 경우, 충청권 소재 기업들의 가치 향상에 궁극적으로 기여할 것으로 기대된다.

Measurement of Electron Temperature and Number Density and Their Effects on Reactive Species Formation in a DC Underwater Capillary Discharge

  • Ahmed, Muhammad Waqar;Rahman, Md. Shahinur;Choi, Sooseok;Shaislamov, Ulugbek;Yang, Jong-Keun;Suresh, Rai;Lee, Heon-Ju
    • Applied Science and Convergence Technology
    • /
    • 제26권5호
    • /
    • pp.118-128
    • /
    • 2017
  • The scope of this work is to determine and compare the effect of electron temperature ($T_e$) and number density ($N_e$) on the yield rate and concentration of reactive chemical species ($^{\bullet}OH$, $H_2O_2$ and $O_3$) in an argon, air and oxygen injected negative DC (0-4 kV) capillary discharge with water flow(0.1 L/min). The discharge was created between tungsten pin-to pin electrodes (${\Phi}=0.5mm$) separated by a variable distance (1-2 mm) in a quartz capillary tube (2 mm inner diameter, 4 mm outer diameter), with various gas injection rates (100-800 sccm). Optical emission spectroscopy (OES) of the hydrogen Balmer lines was carried out to investigate the line shapes and intensities as functions of the discharge parameters such as the type of gas, gas injection rate and inter electrode gap distances. The intensity ratio method was used to calculate $T_e$ and Stark broadening of Balmer ${\beta}$ lines was adopted to determine $N_e$. The effects of $T_e$ and $N_e$ on the reactive chemical species formation were evaluated and presented. The enhancement in yield rate of reactive chemical species was revealed at the higher electron temperature, higher gas injection rates, higher discharge power and larger inter-electrode gap. The discharge with oxygen injection was the most effective one for increasing the reactive chemical species concentration. The formation of reactive chemical species was shown more directly related to $T_e$ than $N_e$ in a flowing water gas injected negative DC capillary discharge.

탄소섬유 강화 에폭시 수지 복합재료의 열안정성 및 기계적 계면특성에 미치는 SiC 표면처리 영향 (Effect of Surface Treated SiC on Thermal Stability and Mechanical Interfacial Properties of Carbon Fiber/Epoxy Resin Composites)

  • 박수진;오진석;이재락;이경엽
    • Composites Research
    • /
    • 제16권3호
    • /
    • pp.25-31
    • /
    • 2003
  • 본 연구에서는 화학적 표면처리에 따른 탄화규소(SiC)의 표면특성 변화가 탄소섬유강화 에폭시 복합재료의 열안정성 및 기계적 계면물성에 미치는 영향을 조사하였다. 표면처리된 탄화규소의 표면특성은 산ㆍ염기도와 접촉각 측정을 통하여 알아보았으며, 열안정성은 TGA를 이용하여 조사하였다. 제조한 복합재료의 기계적 계면물성은 ILSS와 임계세기인자($\textrm{K}_{IC}$), 그리고 critical strain energy release rate($\textrm{G}_{IC}$)를 통하여 고찰하였다. 실험 결과 산 처리된 SiC(A-SiC)는 미처리된 SiC(V-SiC)나 염기처리된 SiC(B-SiC)에 비하여 산도가 증가하였다. 접촉각 측정 결과, 화학적 표면처리는 극성요소의 증가에 기인하는 SiC의 표면자유에너지를 증가시켰다. 이와 같은 물성들은 양극산화로 향상되어졌는데, 이는 좋은 젖음성이 최종 복합재료의 섬유와 매트릭스 사이의 계면결합력을 증가시키는데 중요한 역할을 하기 때문인 것으로 사료된다.

수도용 강관의 도복장 재료특성 평가에 관한 연구 (Evaluation of the Properties of Wrapping Material of Steel Pipe for Water Supply)

  • 이현동;이지은;곽필재
    • 대한환경공학회지
    • /
    • 제30권3호
    • /
    • pp.331-338
    • /
    • 2008
  • 본 연구에서는 국내에서의 생산되는 강관의 도복장 재료 및 방법별로 관체 시편을 이용하여 도복장강관의 성능을 시험하였다. 도복장강관의 원관의 물성 및 화학조성의 분석결과 모두 기준에 적합하였다. 강관의 도복장 재료의 물성시험 결과, 블론아스팔트와 콜타르에나멜은 비용이 저렴하고 기계적 성질은 매우 우수하나, 유기용매에 녹는 단점을 지니고 있고, 도복장강관이 도복장재료로서 성능이 떨어지는 것으로 나타났다. 또한 두껍게 도복할 경우, 강관 자체의 하중이 필요 이상으로 높아지는 문제가 발생할 수 있다. 당김강도 시험과 음극박리 시험결과, PE-3층 도복장방식이 우수하였으며, PE의 도복장방법에 따라서는 압출식(T-Die) 3층 폴리에틸렌(PE 3-Layer)이 분말용착식 폴리에틸렌(PE Fluidized)보다 당김강도가 강하며 음극박리 면적도 작았다. 압출식(T-Die) 3층 폴리에틸렌(PE 3-Layer)은 기계적 특성, 열적 특성 모두 우수하였고, 내화학성도 뛰어났다. 액상에폭시는 수지 선정과 경화 조건에 따라서 도장재의 특성을 변화시킬 수 있다. 본 시험에서 사용된 폴리우레탄은 강관과의 접착력도 에폭시에 비하여 낮았으며, 수분 흡수율은 에폭시 보다 높은 결과를 나타내었다. 폴리우레탄을 도복장재료로 사용하기 위해서는 우레탄의 기본물성과 최적의 도장조건을 도출하는 연구가 진행되어야 할 것으로 판단된다. 본 연구에서 실험한 시편 중에서는 현재 압출식으로 제조한 PE-3층 도복장방법이 가장 우수한 것으로 평가되었지만, 앞으로 기타 다른 도복장재료와의 추가 검증시험이 필요할 것으로 판단된다.

제주한란의 자생환경 특성 및 분포에 관한 연구 (Habitat Characteristics and Distribution of Cymbidium kanran Native to Jejudo, Korea)

  • 이종석
    • 한국환경복원기술학회지
    • /
    • 제7권1호
    • /
    • pp.40-49
    • /
    • 2004
  • This work carried out to define the characteristic of Cymbidium kanran habitat at Mt. Halla in Jejudo, Korea from the ecological point of view including geological and topographical features, air and soil temperature, relative humidity, fluctuations of light intensity, habitat vegetation, distribution altitude, area limit, and etc. And another goal of this study consider the conservation counterplan of the cymbidium habitat. Natural distribution areas of the cymbidium were observed more abundantly on the well drained south and east-facing slopes. Soil acidity was ranged from pH 4.1 to 5.3, and electric conductivity was ranged from 176.4 to 299.9 us/cm (average 215.3 us/cm). Base-saturation percentage of the habitat soil was below 50%, bulk density 0.42g/$cm^2$, particle density 2.05g/$cm^2$, humus content 26%, total nitrogen 0.82%, available phosphate 4.2 mg/kg, exchangeable potassium 0.63 Cmol/kg, calcium 0.44 Cmol/kg and magnesium 0.67 Cmol/kg. Annual mean air temperature was $15.4^{\circ}C$, however, air temperature was ranged $11.7{\sim}18.2^{\circ}C$ in spring, $21.2{\sim}23.8^{\circ}C$ in summer, $12.8{\sim}22.0^{\circ}C$ in fall and $5.5{\sim}7.8^{\circ}C$ in winter season. Annual mean soil temperature at depth of 10cm was $13.2^{\circ}C$ And minimum value was recorded $4.7^{\circ}C$ on January, and maximum value $22.5^{\circ}C$ on August. Relative humidity was ranged 90.8~94.7% in summer, 80.8~91.5% in fall and 77.6~84.2% in winter season. Minimum value was 56.5% on December, and maximum value was 100% on July and August. Light intensities were ranged from 400 to 1,800 lux at the greater part of Cymbidium kanran sites in Jejudo. Summer regarded as an lower light intensities was recorded to be range of 500~600 lux; however, autumn and winter were shown higher light regimes ranged from 3,500 to 3,800 lux. Therefore, one must be suprised that the cymbidium grow at the light condition of 6 lux (minimum) or 10,000 lux (maximum). Tree species keeping higher frequency rate and density were Eurya japonica, Camellia japonica, Castanopsis cuspidata, Carpinus laxiflora and Pinus densiflora. Number of trees growing in a 5${\times}$5m quardrat was 35 as an average, and proportion of evergreen versus deciduous was 5:1. Distribution altitude of the orchid habitat was ranged from 120m (low) to 840m (high) from sea level on the south facing slope of Mt. Halla, and was ranged eastern borderline of Gujwaup, Bukjejugun to western boundaries of Jungmundong, Seogwipo city. For the stable conservation of Cymbidium kanran habitat, sunlight regimes must be increased more by means of cutting trees or twigs in the site.

PZT[$Pb(ZrTi)O_3$]의 XRF 분석용 SRM 개발에 관한 연구 (A study on the development of SRM for XRF analysis of PZT[$Pb(ZrTi)O_3$])

  • 김영만;정찬이;임창호;최범석
    • 분석과학
    • /
    • 제10권6호
    • /
    • pp.439-444
    • /
    • 1997
  • 압전 세라믹스 [$Pb(ZrTi)O_3$] 소재에 대하여 신속하고 정확하게 분석할 수 있는 X-선 형광분석용 표준물질 12종을 제작하였다. 특히 매질효과의 제거, 보관성, 균질성 등을 고려하여 융제($Li_2B_4O_7/LiBO_2=4/1$)로 시료를 16배 희석하여 제작하였다. 네 곳의 분석기관에서 X-선 형광분광기로 12개의 표준물질에 포함된 11 원소에 대하여 검정곡선을 작성해 본 결과 PbO, $ZrO_2$, $TiO_2$, SrO, $WO_3$, $La_2O_3$, $Cr_2O_3$, MgO, $Nb_2O_5$, $MnO_2$들은 correlation factor가 0.998을 넘는 대단히 좋은 직선을 얻었다. 그러나 ZnO의 correlation factor는 0.977로 비교적 낮았으며, 이는 표준시료 중 ZnO의 함량이 10ppm 정도로 낮았기 때문이다. 본 연구에서 제작한 XRF 분석용 표준물질을 이용하면 PZT 중의 주 부성분 원소의 함량을 간편하고 신속 정확하게 분석결과를 얻을 수 있다.

  • PDF

Perfluoropolyether (PFPE)로 처리된 표면의 생물오손 방지 특성 연구 (Study on Anti-biofouling Properties of the Surfaces Treated with Perfluoropolyether (PFPE))

  • 박수인;권순일;이영민;고원건;하종욱;이상엽
    • 공업화학
    • /
    • 제23권1호
    • /
    • pp.71-76
    • /
    • 2012
  • 해조류 및 따개비 등의 해양 생물에 의한 선박 및 해양 구조물 표면의 생물오손(biofouling)은 선박 운영비를 증가시키고 구조물을 유지, 보수하는데 어려움을 가져왔다. 본 논문에서는 이러한 생물오손 방지 또는 생물오손 제거(fouling-release)를 향상시키는 방안으로 불소계 화합물인 perfluoropolyether (PFPE)를 이용하여 해양 생물의 표면 점착을 억제하는 방법이 연구되었다. 우선 생물오손을 예측할 수 있는 지표로서 물방울 접촉각이 측정되었다. 아민그룹으로 처리 된 친수성 표면이 갖는 $46.7^{\circ}$의 물방울 접촉각이 PFPE 처리 후 $64.5^{\circ}$로 상승하여 표면의 혐수성이 증가하였다. 이로 인해 초기에 따개비 포자 및 해양 미생물의 점착이 친수성 카르복실 표면과 비교시 약 15% 억제되었다. 또한 표면 코팅시 평탄면이 형성되어 PDMS로 처리된 표면 굴곡이 있는 표면보다 점착된 미생물의 제거가 용이하였다. 이러한 점착 억제 특성은 물리화학적 방법을 통해 측정된 물성들과 비교, 분석되었으며, 표면에 점착된 미생물의 염색을 통한 형광도 측정을 통해 표면 점착도가 정량적으로 분석되었다. PFPE가 갖는 가공의 용이성과 저독성 특성으로 인해 PFPE는 향후 단기간 생물학적 방오염이 필요한 해양 구조물 이외에 단백질 점착 억제가 요구되는 의료용 장비 등에도 활용될 수 있을 것으로 기대된다.

동위원소비 적외선 분광법(IRIS)을 이용한 물 안정동위원소 분석 (Applications of Isotope Ratio Infrared Spectroscopy (IRIS) to Analysis of Stable Isotopic Compositions of Liquid Water)

  • 정윤영;고동찬;이정훈;고경석
    • 자원환경지질
    • /
    • 제46권6호
    • /
    • pp.495-508
    • /
    • 2013
  • 물의 $^{18}O/^{16}O$$^2H/H$ 조성을 레이저를 이용하여 분석하는 기술은 기존의 IRMS를 이용한 분석방식에 비해 간편한 시료 전처리, 쉬운 장비 유지보수와 현장에서도 응용이 가능하다는 장점을 가지고 있다. 현재 사용되는 레이저 방식을 이용한 물의 안정동위원소 분석은 분석원리에 따라 OA-ICOS(Off-Axis Integrated Cavity Output Spectroscopy)를 이용한 방식과 WS-CRDS(Wavelength-Scanned Cavity Ring-Down Spectroscopy)를 이용한 방식으로 구분된다. WS-CRDS 방식은 기화된 물 시료를 질소 가스를 이용해 광학 공동(optical cavity)로 이동시킨 후 특정 파장에서의 동위원소체가 가지고 있는 흡수도와 레이저를 투과시켜 광학 공동을 투과하여 나오는 레이저 신호의 감쇠시간의 비측정을 통해 수 ppb에서 수십 ppt까지의 감도로 물의 안정동위원소 조성이 측정 가능하다. 이 연구에서는 WS-CRDS 방식의 분석원리와실제 물시료를 활용하여 기기의 안정성과 동위원소비 질량분석기(Isotope Ratio Mass Spectrometry; IRMS) 방법과의 교차분석을 포함한 기기 성능평가 결과를 소개하고 수리학 분야에서 다양한 주제에 대한 적용 가능성을 제시하였다.