탄소섬유 강화 에폭시 수지 복합재료의 열안정성 및 기계적 계면특성에 미치는 SiC 표면처리 영향

Effect of Surface Treated SiC on Thermal Stability and Mechanical Interfacial Properties of Carbon Fiber/Epoxy Resin Composites

  • 박수진 (한국화학연구원 화학소재연구부) ;
  • 오진석 (한국화학연구원 화학소재연구부) ;
  • 이재락 (한국화학연구원 화학소재연구부) ;
  • 이경엽 (경희대학교 기계 산업 시스템 공학부)
  • 발행 : 2003.06.01

초록

본 연구에서는 화학적 표면처리에 따른 탄화규소(SiC)의 표면특성 변화가 탄소섬유강화 에폭시 복합재료의 열안정성 및 기계적 계면물성에 미치는 영향을 조사하였다. 표면처리된 탄화규소의 표면특성은 산ㆍ염기도와 접촉각 측정을 통하여 알아보았으며, 열안정성은 TGA를 이용하여 조사하였다. 제조한 복합재료의 기계적 계면물성은 ILSS와 임계세기인자($\textrm{K}_{IC}$), 그리고 critical strain energy release rate($\textrm{G}_{IC}$)를 통하여 고찰하였다. 실험 결과 산 처리된 SiC(A-SiC)는 미처리된 SiC(V-SiC)나 염기처리된 SiC(B-SiC)에 비하여 산도가 증가하였다. 접촉각 측정 결과, 화학적 표면처리는 극성요소의 증가에 기인하는 SiC의 표면자유에너지를 증가시켰다. 이와 같은 물성들은 양극산화로 향상되어졌는데, 이는 좋은 젖음성이 최종 복합재료의 섬유와 매트릭스 사이의 계면결합력을 증가시키는데 중요한 역할을 하기 때문인 것으로 사료된다.

In this work the effect of surface treated SiC on thermal stability and mechanical interfacial properties of carbon fiber/epoxy resin composites. The surface properties of the SiC were determined by acid/base values and contact angles. The thermal stabilities of carbon fiber/epoxy resin composites were investigated by TGA. The mechanical interfacial properties of the composites were studied in ILSS, critical stress intensity factor ($\textrm{K}_{IC}$), and critical strain energy release rate($\textrm{G}_{IC}$) measurements. As a result, the acidically treated SiC(A-SiC) had higher acid value than untreated SiC(V-SiC) or basically treated SiC(B-SiC). According to the contact angle measurements, it was observed that chemical treatments led to an increase of surface free energy of the SiC surfaces, mainly due to the increase of the specific(polar) component. The mechanical interfacial properties of the composites including ILSS, $\textrm{K}_{IC}$, and $\textrm{G}_{IC}$ had been improved in the specimens treated by chemical solutions. These results were explained that good wetting played an important role in improving the degree of adhesion at interfaces between SiC and epoxy resin matrix.

키워드

참고문헌

  1. Composite Matrials handbook(2nd Ed.) M.M.Schwatz
  2. Carbon Fibers and Their Composites E.Fitzer
  3. Interfacial Forces and Fields: Theory and Applications S.J.Park;J.P.Hsu.(ed)
  4. Carbon Fibers(2nd ed.) J.B.Donnet;R.C.Bansal
  5. Journal of Colloid and Interface Science v.228 Effect of Fibers-polymer Interactions on Fracture Toughness Behaviors of Carbon Fivers-reinforced Epoxy Matrix Composites S.J.Park;M.H.Kim;J.R.Lee;S.Choi https://doi.org/10.1006/jcis.2000.6953
  6. Journal of Colloid and Interface Science v.206 Anodic Surface Treatment on Carbon Fibers: Determination of Acid-base Interaction Parameter between Two Unidentical Solid Surface in a Composite System S.J.Park;J.B.Donnet https://doi.org/10.1006/jcis.1998.5672
  7. Carbon Fibers and Their Composities E.Fizer
  8. Journal of Colloid and Interface Science v.237 Interfacial Characteristics and Fracture Toughness of Electrolytically Ni-plated Carbon Fiber-reinforced Phenolic Resin Matrix Composites S.J.Park;Y.S.Jang https://doi.org/10.1006/jcis.2001.7441
  9. Journal of Polymer Science Part B: Polymer Physics v.37 Dependence of silica particle sizes on network chain lenghs, silica contents,and catalyst concentrations in situ-reinforced polysiloxane elastomers J.M.Breiner;J.E.Mark;G.Beaucage https://doi.org/10.1002/(SICI)1099-0488(19990701)37:13<1421::AID-POLB8>3.0.CO;2-M
  10. Polymeric Materials and Processing Hanser J.M.Charrier
  11. Advances in Catalysis v.16 Chemical Identification of Surface Groups H.P.Boehm https://doi.org/10.1016/S0360-0564(08)60354-5
  12. Analytical Chemistry v.35 A New Analysis of Themogravimetric Traces H.H.Horowitz;G.Metzger https://doi.org/10.1021/ac60203a013
  13. Physical Adsorption on Low Energy Solied,Ⅱ Adesorption of Nitrogen, Argon,Carbon Tetrafluoride and Ethane on Polyproptiene v.68 D.Graham
  14. Interfacial Forces in Aqueous Media C.J.van Oss
  15. Polymer Interface and Adhesion S.Wu
  16. Journal of Colloid and Interface Science v.226 Studies on the Surface Free Energy of Carbon-Carbon Composites: Effect of Filler Addition on the ILSS of composites S.J.Park;M.S.Cho;J.R.Lee https://doi.org/10.1006/jcis.2000.6787
  17. Journal of Colloid and Interface Science v.188 London Dispersive Component of the Surface Free Energy and Surface Enthalpy S.J.Park;M.Brendle https://doi.org/10.1006/jcis.1997.4763
  18. Composites v.22 Aniodic Oxidation of Pitch-precursor Carbon Fibers in Ammonium Sulphate Solutions: the Effect of Fibre Surface Treatment on Composite Mechanical Properties T.R.King;D.F.Adams;D.A.Buttry https://doi.org/10.1016/0010-4361(91)90553-S
  19. Fracture Initiation at Sharp Notches Under ModeⅠ,ModeⅡ, and Mild Mixed Mode Loading v.84 L.Dunn;W.Suwito;S.Cunningham;C.W.May
  20. Philosophical Transactions of the Royal Society of London, Series A v.221 The Phenomena of Rupture and Flow in Solids A.Griffith https://doi.org/10.1098/rsta.1921.0006
  21. International Journal of Fracture v.16 Fracture tougfness Calculation from Maximum Load in Four Point Bend Test of Chevron Notch Specimens D.G.Munz;Shannon,L.J.John;Bubsey;T.Raymond https://doi.org/10.1007/BF00013393
  22. Polymer Journal v.31 Distinct Temperature Dependence of Cholesteric Pitch in Lyotropic Cholesteric Solutions of Polypetide M.C.Chen;D.J.Hourston;W.B.Sun https://doi.org/10.1295/polymj.31.199
  23. Polymer Journal v.42 Temperature dependence of the fiacture behavior of nylon 6/ABS blends T.G.Pressly;H.Keskkula;D.R.Paul https://doi.org/10.1016/S0032-3861(00)00696-0