• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.894-897
• /
• 2003

Recently, the rapid growth of mobile radio system has led to an increasing demand of low-cost high performance communication IC's. In this paper, we have designed RF front end for wireless LAN receiver employ zero-IF architecture. A low-noise amplifier (LNA) and double-balanced mixer is included in a front end. The zero-IF architecture is easy to integrate and good for low power consumption, so that is coincided to requirement of wireless LAN. But the zero-IF architecture has a serious problem of large offset. Image-reject mixer is a good structure to solve offset problem. Using offset compensation circuit is good structure, too. The front end is implemented in 0.25 ${\mu}m$ CMOS technology. The front end has a noise figure of 5.6 dB, a power consumption of 16 mW and total gain of 22 dB.

• Journal of information and communication convergence engineering
• /
• v.18 no.4
• /
• pp.254-259
• /
• 2020

Phased-array antennas comprise a demanding antenna design methodology for commercial wireless communication systems or military radar systems. In addition to these two important applications, the phased-array antennas can be used in beamforming for wireless charging. In this study, a four-way analog beamforming front-end module (FEM) for a hybrid beamforming system is developed for 2.4 GHz operation. In a hybrid beamforming scheme, an analog beamforming FEM in which the phase and amplitude of RF signal can be adjusted between the RF chain and phased-array antenna is required. With the beamforming and beam steering capability of the phased-array antennas, wireless RF power can be transmitted with high directivity to a designated receiver for wireless charging. The four-way analog beamforming FEM has a 32 dB gain dynamic range and a phase shifting range greater than 360°. The maximum output RF power of the four-way analog beamforming FEM is 40 dBm (=10 W) when combined the four individual RF paths are combined.

• Journal of information and communication convergence engineering
• /
• v.17 no.3
• /
• pp.221-226
• /
• 2019

In this work, a transmitter/receiver front-end module (T/R FEM) with an automatic Tx/Rx switching scheme for a 2.4 GHz microwave power transfer is developed for a retro-reflective beamforming scheme. Recently, research on wireless power transfer techniques has moved to wireless charging systems for mobile devices. Retro-reflective beamforming is a good candidate for tracking the spatial position of a mobile device to be charged. In Tx mode, the T/R FEM generates a minimum of 1 W. It also comprises an amplitude and phase monitoring port for transmitting RF power. In Rx mode, it passes an Rx pilot signal from a mobile device to a digital baseband subsystem to recognize the position of the mobile device. The insertion loss of the Rx signal path is 4.5 dB. The Tx and Rx modes are automatically switched by detecting the Tx input power. This T/R FEM is a design example of T/R FEMs for wireless charging systems based on a retro-reflective beamforming scheme.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.143-151
• /
• 2008

In this paper, we have implemented a ubiquitous healthcare system that can measure and check human's health in anytime and anywhere. The implemented prototype are composed of both front-end and back-end. The front-end have several groups: environment sensor group such as temperature, humidity, photo, voice sensor, health sensor group such as blood pressure, heart beat, electrocardiogram, spo2 sensor, gateway for wired/wireless communication, and RFID reader to identify personal. The back-end has a serial forwarder to propagate measurment results, monitor program, and medical information server The implemented sensor node constructs a sensor network using the Zigbee protocol and is ported the tinyOS. The data gathering base node is linux-based terminal that can transfer a sensed medial data through wireless LAN. And, the medical information server stores the processed medical data and can promptly notify the urgent status to the connected medical team. Through our experiments, we've confirmed the possibility of ubiquitous healthcare system based on sensor network using the Zigbee.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.921-924
• /
• 2007

In this paper, we have implemented a ubiquitous healthcare system that can measure and check human's health in anytime and anywhere. The implemented prototype are composed of both front-end and back-end. The front-end have several groups: environment sensor group such as temperature, humidity, photo, voice sensor, health sensor group such as blood pressure, heart beat, electrocardiogram, spo2 sensor, gateway for wired/wireless communication, and RFlD reader to identify personal. The back-end has a serial forwarder to propagate measurment results, monitor program, and medical information server. The implemented sensor node constructs a sensor network using the Zigbee protocol and is ported the TinyOS. The data gathering base node is linux-based terminal that can transfer a sensed medial data through wireless LAN. And, the medical information server stores the processed medical data and can promptly notify the urgent status to the connected medical team. Through our experiments, we've confirmed the possibility of ubiquitous healthcare system based on sensor network using the Zigbee.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.305-310
• /
• 2015

In this paper, a wireless spectrum sensing receiver system is proposed. While a conventional Cognitive Radio(CR) system utilizes frequency down-conversion and demodulation to recognize wireless spectral signal, the proposed one is able to recover and sense valid signal at an RF front-end. It has been designed with a super-regeneration type circuit with a channel selectivity and variability for FDM applications with which a conventional single-channel super-regeneration circuit could not provide. From experimental evaluation, the implemented system has been optimized for channel allocation with quenching signal, and verified for 5 MHz-channel spacing.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.256-261
• /
• 2011

We demonstrate 3-Gb/s wireless link using a 60-GHz receiver front-end fabricated in $0.25-{\mu}m$ SiGe:C bipolar complementary metal oxide semiconductor (BiCMOS) and a mixed-mode quadrature phase-shift keying (QPSK) demodulator fabricated in 60-nm CMOS. The 60-GHz receiver consists of a low-noise amplifier and a down-conversion mixer. It has the peak conversion gain of 16 dB at 62 GHz and the 3-dB intermediate-frequency bandwidth of 6 GHz. The demodulator using 1-bit sampling scheme can demodulate up to 4.8-Gb/s QPSK signals. We achieve successful transmission of 3-Gb/s data in 60 GHz through 2-m wireless link.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.967-975
• /
• 2006

In this paper, design and implementation of a very compact and cost effective front-end module are presented for IEEE 802.16 FWA(fixed Wireless Access) in the 40 GHz band. A multi-layer LTCC(Low Temperature Co-fred Ceramic) technology with cavity process to achieve excellent electrical performances is used to fabricate the front-end module. The wirebond matching circuit design of switch input/output port and waveguide transition to connect antenna are optimally designed to keep transmission loss low. To reduce the size of the front-end module, the dielectric waveguide filter is developed instead of the metal waveguide filter. The LTCC is composed of 6 layers(with the thickness of a layer of 100 um) having a relative dielectric constant of 7.1. The front-end module is implemented in a volume of $30{\times}7{\times}0.8mm^3$ and shows an overall insertion loss < 5.3 dB, and image rejection value > 49 dB.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1346-1349
• /
• 2002

This paper presents the design and implementation of 16-QAM modem that can be applied to fixed broadband wireless access systenm. It is implemented in the hardware prototype that consist of FPGA(Field Programmable Gate Array) for digital signal processing and analog front end module for analog signal processing. We provide 20.48Mbps data rate using implemented modem and test the modem in KOREA 26㎓ broadband wireless local loop system including IFU(Intermediate Frequency Unit) and RFU(Radio Frequency Unit) via air interface.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.122-127
• /
• 2016

In this paper, new spectrum sensing schemes based on analog/RF front-end processing are introduced for IoT wireless sensor networks. While the conventional approaches for wireless channel cognition have been issued in signal processing area, the RF spectrum cognition concept makes it feasible to achieve cognitive wireless sensor networks (C-WSNs). The spectrum cognition at RF processing is categorized as four kinds of sensing mechanisms. Two recent reseaches are described as promising candidates for the C-WSN. One senses spectrum by the frequency discriminating receiver, the other senses and detects from the frequency selective super-regenerative receiver. The introduced systems with simple and low-power RF architectures play dual roles of channel sensing and demodulation. simultaneously. Therefore, introduced spectrum sensing receivers can be one of the best candidates for IoT wireless sensor devices in C-WSN environments.