• Journal of Internet Computing and Services
• /
• v.15 no.1
• /
• pp.179-191
• /
• 2014

In this paper, a frame transmission method to make IEEE 802.15.4 nodes run at a new channel and its characteristics are studied when they experience difficulties in transmission of frames due to WiFi traffic. The researches on evaluating the interference from WiFi traffic, searching for a new channel with little interference or not, and changing the operating channel are analyzed. In an wireless channel overlapped with IEEE 802.11 network, the transmission delay of IEEE 802.15.4 frames, the collision of frames in sending IEEE 802.15.4 frames without applying CSMA-CA algorithm, and the operation of IEEE 802.11 nodes are explained. A transmission method of frames including frame-formated code blocks in order to use the rest part of collided IEEE 802.15.4 frame is proposed. In the experiments of the proposed method, it is observed that frame-formated code blocks are synchronized and received by receivers in case of collision, and then the collided positions in IEEE 802.15.4 frame and the characteristics of frame reception rate are analyzed. The experimental results show that the performance of the proposed method is improved in comparison to an existing method when we measure the time taken to send a channel change command and get the response in order to avoid the interference from WiFi traffic.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2015

Ultra-wide-angle wireless endoscopes are demonstrated in this paper. The endoscope is composed of an ultra-wide-angle camera module and wireless transmission module. A lens unit with the ultra-wide FOV of 162 degrees is designed and manufactured. The lens, image sensor, and camera processor unit are packaged together in a $3{\times}3{\times}9-cm3$ case. The wireless transmission modules are implemented based on UWB- and WiFi-based platform, respectively. The UWB-based module can transmit HD video to a computer in resolution of $2048{\times}1536$ (QXGA) and the frame rate of 15 fps in MJPEG compression mode. The maximum data transfer rate reaches 41.2 Mbps. The FOV and the resolution of the endoscope is comparable to a medical-grade endoscope. The FOV and resolution is ~3X and 16X higher than that of a commercial high-performance WiFi endoscope, respectively. The WiFi-based module streams out video to a smart device with th maximum date transfer rate of 1.5 Mbps at the resolution of $640{\times}480$ (VGA) and the frame rate of 30 fps in MJPEG compression mode. The implemented components show the feasibility of cheap medical-grade wireless electronic endoscopes, which can be effectively used in u-healthcare, emergency treatment, home-healthcare, remote diagnosis, etc.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.298-300
• /
• 2015

Beacon is a signal device, which mainly used to support the safety of the locate and operation of a watercraft and aircraft. Recently, the IT sector BLE (Bluetooth Low Energy) also made possible to operate with less energy over several months using a beacon standards are applied. In addition, the location-based services and technologies using BLE Beacon has attracted attention. However, there is the problem that by using only the position location Beacon devices when high error rate can be measured accurate position. Therefore, in this paper, combines WiFi and Beacon based on Smartphone. Also propose an indoor positioning algorithm reduces the error rate of the position location value.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.4
• /
• pp.65-70
• /
• 2016

As network communication increases by using public WiFi to check e-mail and handling Internet banking, the danger of hacking public routers continues to rise. While the national policy is to further propagate public routers, users are not eager to keep their information secure and there is a growing risk of personal information leakage. Because wireless routers implement high accessibility but are vulnerable to hacking, it is thus important to analyze hacking to tackle the attacks. In this study, an analysis is made of the encryption method used in WiFi and cases of hacking WiFi by security attacks on wireless routers, and a method for tackling the attacks is suggested.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.111-116
• /
• 2012

In this paper, we fabricate a WiFi based video transmitting equipment and establish a video transmitting system for realtime transmitting of accident scene on expressways. The transmitting equipment is based on the H.264 video codec and embed WiFi module. The transmitting equipment can transmit video and also meta data such as location positioning through the Wibro network using a Wibro terminal. From test results, it is clear that high density videos were transmitted while the vehicle carried by the video equipment was traveling with velocity of 80 km/h.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.13-19
• /
• 2014

Improvement of performances of potable communication devices such as laptops, tablets, and smart-phones enables people to do group meetings in any place. However, even though group members in a meeting locate close, data or information to be shared in the group are exchanged through the cellular networks. This increases unnecessary traffic loads in the wireless/backbone networks and as consequence it increase delays in communications. To resolve the problem, an android-based application is developed in this paper. The application utilizes Wi-Fi Direct so that all members in the meeting can direct exchange materials for the meeting without using cellular networks.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.243-248
• /
• 2012

In this paper we simulate the capacity of VOIP calls through WiFi network by computer simulations using OPNET modeler. The results show that sudden quality degradations occur on all VoIP calls when the number of call of an AP(Access Point) increases beyond a specific value. The reason of the quality degradation was turned out to be the queueing delay at the down link of AP. Under the IEEE 802.11b environments, the maximum number of VoIP calls of an AP maintaining the required voice quality (MOS > 2.5), was evaluated as 5, 12, and 27 when we use G.711, G.729a, and G.729a VAD codec, respectively.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.2
• /
• pp.81-88
• /
• 2014

In this paper, an implementation of concurrent backoff delay process on a single chip with IEEE 802.15.4 hardware and 8051 processor core that can be used for analyzing the interference on IEEE 802.15.4 channels due to WiFi traffics is studied. The backoff delay process of IEEE 802.15.4 CSMA-CA algorithm is explained. The characteristics of random number generator, timer, and CCA register included in the single chip are described with their control procedure in order to implement the process. A concurrent backoff delay process to evaluate multiple IEEE 802.15.4 channels is proposed, and a method to service the associated tasks at sequentially ordered backoff delay events occurring on the channels is explained. For the implementation of the concurrent backoff delay process on a single chip IEEE 802.15.4 hardware, the elements for the single channel backoff delay process and their control procedure are used to be extended to multiple channels with little modification. The medium access delay on each channel, which is available after execution of the concurrent backoff delay process, is displayed on the LCD of an IEEE 802.15.4 channel analyzer. The experimental results show that we can easily identify the interference on IEEE 802.15.4 channels caused by WiFi traffics in comparison with the way displaying measured channel powers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.659-661
• /
• 2013

This paper, we study on multiple wireless network module support for the Android based set-top box. Limitation of mobile OS, Android based set-top box has limited choice of various wireless network modules, Atheros, Realtek, Ralink, etc. In this paper, for the request of Set-top box supplier and market demands, we research on reconfigure & change the Android network HAL(Hardware Abstract Layer) for Wi-Fi networking support and implementation about multiple Wi-Fi module support platform.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.95-97
• /
• 2016

실내 위치 인식 기술은 여러 기술을 통해 시도되어 왔으며, 대표적인 기술로는 Wi-Fi 기반 위치 인식과 Bluetooth Low Energy 기반의 위치 인식이 있다. 하지만 Bluetooth Low Energy는 10m 거리 밖에선 오차가 많아지고 정밀도가 낮아지는 특성으로 인해 Wi-Fi가 보편화되었다. 본 논문에서는 핑거프린팅 기법을 이용하였을 때 Wi-Fi와 Bluetooth Low Energy의 위치 인식 기술의 성능 분석을 목적으로 기술되었다.