• Journal of Applied Biological Chemistry
• /
• 제42권4호
• /
• pp.175-179
• /
• 1999

Grape seed oil was extracted using different preparatory treatments as follows: (1) grinding, (2) grinding and roasting, (3) grinding and wet- roasting, (4) grinding, roasting, and wet-roasting, and (5) grinding, wet-roasting, and wet-roasting. The highest antioxidant activity was obtained from the sample with the method (2). Initial states of oxidation were similar except method (1) that showed more oxidized state, being P.O.V.8. Acid values were observed in the range from 1.42 to 1.89. The lowest acid value was found as 1.42 in method (1) and those of others were somewhat higher, indicating that heating process of roasting produced some free fatty acids. From the results of sensory evaluation, the best odor and taste were obtained from the methods (2) and (3). Repetitive procedure of wet-roasting, like method 5, caused some loss of flavor components and decrease in the sensory evaluation score. Addition of grape seed oil (method 2) to soybean and perilla oil at the level of 20% retained considerable antioxidant activities as much as 4.3 and 5 times, respectively, than 100% soybean or perilla oil stored for 12 weeks. When soybean or perilla oil was mixed with 20% grape seed oils, P.O.V. decreased to half of that of unmixed oils.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.340-340
• /
• 2012

최근 MOS 소자들이 게이트 산화막을 Mono-layer가 아닌 Multi-Layer을 사용하는 추세이다. Bulk와 High-k물질간의 Dangling Bond를 줄이기 위해 Passivation 층을 만드는 것을 예로 들 수 있다. 이러한 Double Layer의 쓰임이 많아지면서 계면에서의 Interface State Density의 영향도 커지게 되면서 이를 측정하는 방법에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 $SiO_2$ Double Layer의 Interface State Density를 Conductance Method를 사용하여 구하는 연구를 진행하였다. Wet Oxidation과 Chemical Vapor Deposition (CVD) 공정을 이용하여 $SiO_2$ Double-layer로 증착한 후 Aluminium을 전극으로 하는 MOS-Cap 구조를 만들었다. 마지막 공정은 $450^{\circ}C$에서 30분 동안 Forming-Gas Annealing (FGA) 공정을 진행하였다. LCR meter를 이용하여 high frequency C-V를 측정한 후 North Carolina State University California Virtual Campus (NCSU CVC) 프로그램을 이용하여 Flatband Voltage를 구한 후에 Conductance Method를 측정하여 Dit를 측정하였다. 본 연구 결과 Double layer (Wet/CVD $SiO_2$)에 대해서 Conductance Method를 방법을 이용하여 Dit를 측정하는 것이 유효하다는 것을 확인 할 수 있었다. 본 실험은 앞으로 많이 쓰이고 측정될 Double layer (Wet/CVD $SiO_2$)에 대한 Interface State Density의 측정과 분석에 대한 방향을 제시하는데 도움이 될 것이라 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제24권3호
• /
• pp.400-402
• /
• 2003

• 센서학회지
• /
• 제25권4호
• /
• pp.275-279
• /
• 2016

Chemical vapor deposited (CVD) polycrystalline graphene is widely used for various sensor application because of its extremely large surface-to-volume ratio. The electrical properties of CVD-graphene is significantly affected by the grain size and boundaries (GGBs), but evaluation of GGB of continuous monolayer graphene is difficult. Although several evaluation methods such as tunneling electron microscopy, confocal Raman, UV/ozone-oxidation are typically used, they still have issues in evaluation efficiency and accuracy. In this paper, we suggest an improved evaluation method for precise and simple GGB evaluation which is based on UV/ozone-oxidation and chemical etching process. Using this method, we could observe clear GGBs of CVD-graphene layers grown by different process conditions and statistically evaluate average grain sizes varying from $1.69{\sim}4.43{\mu}m$. This evaluation method can be used for analyzing the correlation between the electrical properties and grain size of CVD-graphene, which is essential for the development of graphene-based sensor devices.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권3호
• /
• pp.216-221
• /
• 2017

디젤엔진은 내연기관 중에 제동 열효율이 가장 높은 엔진이기 때문에 큰 동력을 필요로 하는 대형트럭과 같은 중 대형 운송 차량 및 선박 등의 수송분야 및 발전시스템 등의 다양한 분야에서 사용되어지고 있다. 하지만, 디젤엔진은 연소과정에서 질소산화물(이하 NOx) 발생량이 많은 단점을 가지고 있다. 따라서 본 연구에서는 선박용 디젤엔진의 NOx를 저감하기 위해서 습식 배기가스 처리 기술인 무격막식 해수 전기분해 방식을 이용하여 NOx 저감을 시도하였다. 실제 해수를 사용하여 디젤엔진에서 배출되는 유해가스에 전기 분해된 해수인 전해수를 분사하여 보았다. 전해수의 pH 농도 및 유효염소농도, 온도에 따른 NO 산화율 및 NOx 감소량을 조사하였다. 본 실험을 통해서 전해수의 pH가 약산성 영역일 경우가 중성일 경우보다 산화탑에서의 NO 산화율이 상승하였고, 유효염소농도가 높을수록 NO 산화율이 증가하는 것을 확인할 수 있었다. 또한, 전해수 온도는 NO 산화율에 영향이 없음을 추가적으로 확인할 수 있었으며 디젤엔진에서 생성된 배기배출물에 전해수를 분사함으로써 NOx가 저감됨을 확인할 수 있었다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.155-159
• /
• 1997

We investigated the effect of mechanical backside damage in Czochralski silicon wafer. The intensity of mechanical damage were evaluated by minority carrier recombination lifetime by a laser excitation/microwave reflection photoconductance decay method, photo-acoustic displacement method, X-ray section topography, and wet oxidation/preferential etch methods. The data indicate that the higher the mechanical damage intensity, the lower the minority carrier lifetime, and the photoacoustic displacement values are also increased proportionally.

• 한국진공학회지
• /
• 제7권2호
• /
• pp.82-87
• /
• 1998

$O_2$기체에 $NH_3/O_2$기체를 첨가하여 실리콘 표면에 산화막을 형성하는 $NH_3/O_2$산화법 에 의한 산화공정시 반응석영관 외부에 방출하는 기체는 $N_2,O_2$및 $H_2O$이며 극소량의 $CO_2$, NO 및 $NO_2$가 검출되었다. 두 종류의 산화제($O_2$ 및 $H_2O$)가 산화에 기여하며 성장률은 $NH_3$및 $O_2$ 의 부분압과 온도에 의해 결정되며, 그 기울기는 건식 및 습식 산화법의 중간에 평행 하게 위치함을 확인하였다. Auger Electron Spectroscopy(AES) 측정결과 $NH_3/O_2$ 산화막은 정확한 $SiO_2$의 화학량론을 가지며 $SiO_2/Si$계면에 발생하는 결합을 억제하며 고정전하의 발 생을 최소화함을 알 수 있었다. $NH_3/O_2$ 산화막(470$\AA$)의 항복전압을 57.5Volt이며, C-V특성 곡선을 축정한 결과 플랫밴드 전압은 0.29Volt이며 곡선의 형태는 이상곡선과 일치하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.630-633
• /
• 1997

Spent fuel decladding device and dry voloxidizer is to separate the spent pellet from spent fuel rod cut by 250mm and to convert the spent pellet into powder form for reuse and/or disposal of the spent fuel. There are two methods in decladding and voloxidation of spent fuel, that is, wet method with chemical material and dry method with mechanical device. In this study, to examine the fuel rod decladding process and the pellet voloxidation process, the devices for the spent fuel decladding and the pellet voloxidation with dry method are developed. The decladding machine is designed to separate pellets from fuel rod by slitting device. And, the voloxidizer is designed to convert the spent pellet which is ceramic form into powder form by oxidation using the multi step mesh, vibrator, and air in the high temperature environment. The result of this study, such as operation condition et., will be utilized in the design of the machine for demonstration.

• 상하수도학회지
• /
• 제32권2호
• /
• pp.123-130
• /
• 2018

This paper provided the information related to the removal of 2,4,6-tribromophenol using in-situ and stable liquid ferrates(VI). This research's goal was to observe the differences of oxidation power between in-situ liquid ferrate(VI) and stable liquid ferrate(VI). The in-situ liquid ferrate(VI) ($FeO_4{^{2-}}$) has been successfully produced with the concentration 42,000 ppm (Fe) after 11 minutes of reaction time. The stable liquid ferrate(VI) was also successfully produced following the modification method by Sharma with the produced concentrations 7,000 ppm. The stable liquid ferrate(VI) was stable for 44 days and slightly decreased afterwards. This research has been carried out using 2,4,6-tribromophenol as the representative compound. Both of ferrates(VI) have the highest oxidation capability at the neutral condition. Furthermore, the stable liquid ferrate(VI) has higher oxidation power than the in-situ liquid ferrate(VI).

• 동력기계공학회지
• /
• 제20권1호
• /
• pp.42-49
• /
• 2016

This study showed that on-site ferrate(VI) solution was synthesized by wet oxidation method and applied aqueous 2,4-dichlorophenol(DCP) solution to evaluate the degradation efficiency. On-site ferrate(VI) solution was synthesized by putting $FeCl_3{\cdot}6H_2O$ in the strong alkali solution with NaClO and NaOH and applied DCP solution directly. DCP solution was extracted by the liquid-liquid method and analyzed by GC-ECD. The factors such as pH, DCP initial concentration, injected ferrate(VI) dosage, temperature were investigated. The optimum pH and temperature conditions of DCP degradation were obtained in neutral condition and $35^{\circ}C$. And the experimental results showed that DCP removal efficiency also increased with the decrease of DCP initial condition and the injected ferrate(VI) dosage.