• ETRI Journal
• /
• 제39권6호
• /
• pp.771-781
• /
• 2017

For efficient spectral utilization of satellite channels, a shared band transmission technique is introduced in this paper. A satellite transmits multiple received signals from a gateway and terminal in the common frequency band by superimposing the signals. To improve the power efficiency as well as the spectral efficiency, a travelling wave tube amplifier in the satellite should operate near the saturation level. This causes a nonlinear distortion of the superimposed transmit signal. Without mitigating this nonlinear effect, the self-interference cannot be properly cancelled and the desired signal cannot be demodulated. Therefore, an adaptive compensation scheme for nonlinearity is herein proposed with the proper operation scenario. It is shown through simulations that the proposed shared band transmission approach with nonlinear compensation and self-interference cancellation can achieve an acceptable system performance in nonlinear satellite channels.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.255-259
• /
• 2013

In this paper a new coupling method for efficient and simple analysis of single phase induction motor is presented. The circuit representation of both the stator winding and each conducting rotor loop (composed of rotor bar and end ring segment) is used in conjunction with the distribution of magnetic flux linkage instead of inductance matrix. The flux linkage is calculated using air-gap flux density distributions driven by unit currents in the stator windings and rotor bars. The field distribution of one turn of a coil is calculated by FEM and the result is used to calculate total flux linkage by employing a coordinate transformation. The numerical results give good agreement with prior literature. The method is particularly effective in analyzing the effect of the number of rotor bars.

• 대한조선학회논문집
• /
• 제36권2호
• /
• pp.50-60
• /
• 1999

안전하고 경제적인 쌍동선형을 설계하기 위해서는 횡갑판(cross deck)에 작용하는 파랑 동하중의 정확한 추정이 필요하다. 본 논문에서는 Lee 등[3]이 제시한 2차원 스트립 방법을 6자유도 운동을 갖는 3차원의 경우로 확장하여 임의 입사파에서 파랑하중(수직 및 수평 전단력, 굽힘모멘트 및 비틀림모멘트)을 추정하였고, 발표된 계산 결과(스트립 방법 및 3차원 패널법) 및 Wahab 등[2]의 실험 결과와 비교하였다. 일반적으로 2차원 결과보다 3차원 방법이 실험 결과와 잘 일치하였으나, 같은 이론을 사용한 3차원 방법에 있어서도 몇몇 경우에 계산값의 차이가 있었다. 파랑하중 추정의 정도를 향상시키기 위해서 점성항의 고려 및 엄밀한 속도항의 고려가 필요하다고 생각된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.842-848
• /
• 2013

Developments of Solid-State Gyroscopy during last decades are impressive and were based on thin-walled shell resonators like HRG or CRG made from fused quartz or leuko-sapphire. However, a number of design choices for inertial-grade gyroscopes, which can be used for high-g applications and for mass- or middle-scale production, is still very limited. So, considerations of fundamental physical effects in solids that can be used for development of a miniature, completely solid-state, and lower-cost sensor look urgent. There is a variety of different types of bulk acoustic (elastic) waves (BAW) in anisotropic solids. Shear waves with different variants of their polarization have to be studied especially carefully, because shear sounds in glasses and crystals are sensitive to a turn of the solid as a whole, and, so, they can be used for development of gyroscopic sensors. For an isotropic medium (for a glass or a fine polycrystalline body), classic Lame's theorem (so-called, a general solution of Elasticity Theory or Green-Lame's representation) has been modified for enough general case: an elastic medium rotated about an arbitrary set of axes. Travelling, standing, and mixed shear waves propagating in an infinite isotopic medium (or between a pair of parallel reflecting surfaces) have been considered too. An analogy with classic Foucault's pendulum has been underlined for the effect of a turn of a polarizational plane (i.e., an integration effect for an input angular rate) due to a medium's turn about the axis of the wave propagation. These cases demonstrate a whole-angle regime of gyroscopic operation. Single-crystals are anisotropic media, and, therefore, to reflect influence of the crystal's rotation, classic Christoffel-Green's tensors have been modified. Cases of acoustic axes corresponding to equal velocities for a pair of the pure-transverse (shear) waves have of an evident applied interest. For such a special direction in a crystal, different polarizations of waves are possible, and the gyroscopic effect of "polarizational precession" can be observed like for a glass. Naturally, formation of a wave pattern in a massive elastic body is much more complex due to reflections from its boundaries. Some of these complexities can be eliminated. However, a non-homogeneity has a fundamental nature for any amorphous medium due to its thermodynamically-unstable micro-structure, having fluctuations of the rapidly-frozen liquid. For single-crystalline structures, blockness (walls of dislocations) plays a similar role. Physical nature and kinematic particularities of several typical "drifts" in polarizational BAW gyros (P-BAW) have been considered briefly too. They include irregular precessions ("polarizational beats") due to: non-homogeneity of mass density and elastic moduli, dissymmetry of intrinsic losses, and an angular mismatch between propagation and acoustic axes.

• 대한의용생체공학회:의공학회지
• /
• 제14권2호
• /
• pp.125-136
• /
• 1993

The study of Cochlear biomechanics is to clearly define three biomechanical principles of the Cochlea : Activity, Nonlinearity and Feedback. In this article, the Cochlea is linearly and actively modelled in one dimensional time domain. The sharp tunning of the Basilar Membrane displacement is shown when the amplifying activity of hair cells is added to the model. The amplified energy of the travelling displacement wave is emitted throughout the Cochlear fluid, so that the model becomes unstable. A new technique is introduced to reduce strong echos fro the Helicotrema. It makes the model less unstable. Both pure and click tones are used as input stimuli onto the ear durm. When the model is normal, the click response of the model shows that the backward emission of the amplified fluid pressure has mainly the echos from the Helicotrema. However, when the linear and active model is assumed to be abnormal, that is, some of hair cells are damaged not to produce the active process, the effect of the hair cell damage is resulted in the Oto-acoustic emission. The frequency response of the abnormally emitted sound pressure shows that the Oto-acoustic emission has the information about the characteristic frequency of the damaged hair cell. The main aim of this paper is to demonstrate the active biomechanics of the Chchlea in the time domain.

• 한국해양학회지
• /
• 제29권3호
• /
• pp.296-303
• /
• 1994

회전하는 원통형 이층 유체에 하층 유체와 동일한 밀도의 유체를 경사진 하층 바 닥의 둘레를 통하여 주입시 하층 내부는 일정한 수직 운동을 하게 되며 이러한 수직운 동은 결국 하층 유체에 Sverdrup type의 운동인 남향의 서안 경계류와 북향의 내부 운 동을 발생시킨다. 이때 $\beta$-효과와 동시에 하층 유체가 상층 경계면과 만나게 하므로써 소위 극전선 효과를 갖고 있는 상층 유체의 운동 특성을 관찰하였다. 서안에서 의 순 압성, 동안에서 의 경압성 운동이 뚜렷하게 나타나고 특히 동안 경계류의 남향과 서안 경계류의 남향은 서안에서 의 이안 현상을 야기시킨다. 상층에 $\beta$-효과를 증가시 서안 경계류의 폭이 감소하는 이안 현상후 내부에 "eddy" 모양의 흐름이 존재한다. 한편 경압성 Rossby wave는 동안 부근에서 뚜렷하게 관측되나 서쪽으로 진행하면서 소멸되 는 현상이 관측되었다. 하층 유체에 국지적 지형 효과서 준 경우 상층수의 서안 경계 류 및 동안 경계류가 민감하게 반응하여 동안에서는 정상파 형태의 운동이 나타나고 서안에서는 이안 현상 없이 경계류의 폭이 증가함을 보인다. 이는 하층의 순압성 운동 이 지형 효과를 느끼는 반면, 그 영향은 상층에 직접전달되지 못하고 있음을 보여주고 있는 것이라 사료된다. 상층의 $\beta$-효과 증가시 internal radius보다 훨씬 큰 규모의 파형이 내부에 존재하는 특성을 보여 주고 있다. 보여 주고 있다.

• 한국음향학회지
• /
• 제30권7호
• /
• pp.361-367
• /
• 2011

진동하는 원통셸에서는 파동의 크기를 유지하며 전파하는 진행파 (굽힘파, 종파, 전단파)와 전파함에 따라서 파동의 크기가 지수 함수적으로 급격히 감쇠하며 소멸되어가는 감쇠파가 발생한다. 감쇠파의 영향은 일반적으로 가진 지점 혹은 구조물의 끝단 지점 부근에 국한되어 작게 발생되게 된다. 그러나 원통셸의 경우 상당히 큰 감쇠파가 발생할 수 있으며, 이러한 감쇠파로 인하여 종진동이 끝단 부근에서 상당히 크게 발생하는 현상이 일어날 수 있다. 이러한 현상은 저자의 유한 원통셸의 종진동 측정 실험 논문에서 관찰되었으며, 본 논문에서는 이러한 큰 감쇠파에 의한 원통셸의 끝단 종진동 현상을 해석적으로 분석하였다. 원통셸의 진동해석을 위하여서는 파동 전파 방법을 활용하였으며, 해석 결과를 실험 결과와 비교함으로써 진동하는 원통셸의 끝단에서 모드 변환 (굽힘파와 감쇠파간의 변환)에 의하여 상당히 큰 감쇠파가 발생할 수 있음을 보였다. 또한 감쇠파의 영향은 원통셸 끝단의 큰 종진동을 발생시키며, 원통셸 전체 길이의 1/3 지점까지도 영향을 줄 수 있음을 보였다.

• Journal of Communications and Networks
• /
• 제15권6호
• /
• pp.559-568
• /
• 2013

We report on the first error-free terahertz (THz) wireless communication at 0.310 THz for data rates up to 8.2 Gbps using a 18-GHz-bandwidth GaAs/AlGaAs field-effect transistor as a detector. This result demonstrates that low-cost commercially-available plasma-wave transistors whose cut-off frequency is far below THz frequencies can be employed in THz communication. Wireless communication over 50 cm is presented at 1.4 Gbps using a uni-travelling-carrier photodiode as a source. Transistor integration is detailed, as it is essential to avoid any deleterious signals that would prevent successful communication. We observed an improvement of the bit error rate with increasing input THz power, followed by a degradation at high input power. Such a degradation appears at lower powers if the photodiode bias is smaller. Higher-data-rate communication is demonstrated using a frequency-multiplied source thanks to higher output power. Bit-error-rate measurements at data rates up to 10 Gbps are performed for different input THz powers. As expected, bit error rates degrade as data rate increases. However, degraded communication is observed at some specific data rates. This effect is probably due to deleterious cavity effects and/or impedance mismatches. Using such a system, realtime uncompressed high-definition video signal is successfully and robustly transmitted.