• ETRI Journal
• /
• 제23권4호
• /
• pp.177-189
• /
• 2001

Multicarrier DS-CDMA is an effective approach to combat fading and various kinds of interference. In this paper, we present an overlapped multicarrier DS-CDMA system, wherein each of the rate 1/M convolutionally-encoded symbols is also repetition coded and transmitted using overlapped multicarriers. However, since the frequency spectrums of successive carriers are allowed to overlap, the transmission bandwidth is more efficiently utilized. The effect of the overlapping percentage between successive carriers of a multicarrier DS-CDMA system on the performance is investigated to determine the overlapping percentage showing the best performance. We suggest two methods for sub-band overlapping variation. One is to allow variation of sub-band overlapping percentage when the total number of subcarriers is fixed. The other is to increase the number of sub-bands (the number of repetitions R) with fixed sub-band bandwidth. Given a total number of subcarriers MR, we show that the BER variation is highly dependent on the roll-off factor ${\beta}$ of a raised-cosine chip wave-shaping filter irrespective of convolutional encoding rate 1/M and repetition coding rate 1/R. We also analyze the possibility of reduction in total multi-user interference by considering the variation of both the roll-off factor ($0<{\beta}{\leq}1$) and the sub-band overlapping factor ($0<{\lambda}{\leq}2$), and show that the proposed system may outperform the multicarrier DS-CDMA system in [3].

• 한국전자통신학회논문지
• /
• 제9권9호
• /
• pp.1057-1062
• /
• 2014

차량통신시스템은 차량/도로기술과 정보통신기술을 접목하여 다양한 안전메시지를 전송하거나 지능형 교통시스템에 적용이 가능하다. 본 논문에서는 IEEE 802.11p를 기반으로 한 차량통신시스템을 소개하고 이 시스템의 전파특성을 도심환경에서 측정한 결과를 보인다. 전파특성은 패킷오류율과 수신스펙트럼을 이용하여 측정한다. 이 결과를 바탕으로 하여 실제 서비스 적용에 있어서 필요한 구현 이슈에 대해 논의한다.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.881-886
• /
• 2003

This paper describes the design and implementation of a passive transponder chip for RFID applications. Passive transponders do not have their own power supply, and therefore all power required for the operation of a passive transponder must be drawn from the field of the reader. The designed transponder consists of a full wave rectifier to generate a dc supply voltage, a 128-bit mask ROM to store the information, and Manchester coding and load modulation circuits to be used for transmitting the information from the transponder to the reader. The transponder with a size 410 x 900 ${\mu}$m$^2$ has been fabricated using 0.65 ${\mu}$m 2-poly, 2-metal CMOS process. The measurement results show the data transmission rate of 3.9 kbps at RF frequency 125 kHz.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2008년도 추계 공동 국제학술대회
• /
• pp.634-642
• /
• 2008

Radio wave is the valuable resources in $21^{st}$ century. It will be widely used in various applications such as DMB, USN, telematics, and home network as well as mobile and wireless communications. Cognitive Radio technology is devised to maximize the utilization of radio resources by sensing near-by spectrum and dynamic and allocating free resources dynamically and adaptively. Wireless links for the secondary user need to be frequently switched to idle frequencies during the transmission of multimedia data in the cognitive radio based system. This may cause delay and information loss, and QoS degradations occur inevitably. The efficient frequency allocation scheme is necessary to support the seamless multimedia service to the secondary user while maintaining QoS of the primary user. This paper suggests a frequency selection scheme which considers other parameters such as cell load, data rate, and available bandwidth than just received signal strength during the frequency selection process. The performance of our proposed scheme is analyzed by simulation.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 춘계학술대회
• /
• pp.116-119
• /
• 1993

In this paper, we implemented a pulse wave type oximeter system that continuously measure the of oxyhemoglobin saturation of the arterial blood(SaO2) and pulse rate with non-invasively. We use the transmission type and reflection type transducer for comparison the percentage of hemoglobin oxgen saturation. The light Iron the two kind of LEDs is transmitted through the tissue, then received by a single photodiode with alternatively. By the phase sensitive detection circuit, the output of the photodiode is separated in to red and near infrared signal. We calculated a ratio of light transmittance between two kind of LEDs, and then, it is applied to the oxgen saturation coefficent calculation formular.

• Journal of Communications and Networks
• /
• 제15권6호
• /
• pp.569-575
• /
• 2013

In this paper, we present a photonic approach for generating highly stable coherent sub-terahertz (THz) signals for wireless communications. As proof-of-concept we transmit data at 100 GHz carrier frequency using on-off keying modulation and heterodyne detection. The sub-THz carrier signals are generated by photo-mixing two optical carrier signals at different frequencies, extracted from an optical frequency comb. We introduce a novel system to stabilize the phase of the optical carrier signals. Error-free transmission is successfully achieved up to a bit rate of 8.5 Gbit/s at 100 GHz.

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.37-45
• /
• 2011

The nonlinear free-surface motions interacting with a floating body were investigated using the Moving Particle Semi-implicit (MPS) method proposed by Koshizuka and Oka [6] for incompressible flow. In the numerical method, more realistic Lagrangian moving particles were used for solving the flow field instead of the Eulerian approach with a grid system. Therefore, the convection terms and time derivatives in the Navier-Stokes equation can be calculated more directly, without any numerical diffusion, instabilities, or topological failure. The MPS method was applied to a numerical simulation of predicting the efficiency of floating-type breakwater interacting with waves.

• 대한금속재료학회지
• /
• 제50권5호
• /
• pp.389-393
• /
• 2012

Improvement in microwave absorbance has been investigated by insertion of a periodic air cavity in rubber composites filled with magnetic powders. A mixture of $Co_2Z$ hexagonal ferrite and Fe powders were used as the absorbent fillers in silicone rubber matrix. The complex permeability and complex permittivity of the magnetic composites were measured by reflection/transmission technique. In the grid-type magnetic absorbers, the equivalent permeability (${\mu}_{eq}$) and permittivity (${\varepsilon}_{eq}$) are calculated as a function of air volume rate (K) on the basis of effective medium theory. Reduction in the material parameters (especially, dielectric permittivity and magnetic loss) has been estimated with the increase of K. Plotting the ${\mu}_{eq}$ and ${\varepsilon}_{eq}$ on the solution map of wave-impedance matching, wide bandwidth microwave absorbance has been predicted in the magnetic composites with an optimum value of K.

• 디지털산업정보학회논문지
• /
• 제10권2호
• /
• pp.61-73
• /
• 2014

An automatic vehicle location tracing system is to build GIS server and on transmission for providing service in various ways by collecting a GPS location information from each vehicle. It is to save GPS data from OBU built-in on the vehicle and transmit the GPS data using the RSU on the roadside and WAVE communication technology. The collected data from the RSU is transmitted to the GIS server and stored in DB(database) and based on the GPS data that was collected from the each vehicle the system is to provide user service to suit the applications so it is to provide various services between RSU and OBU. In this paper, by implementing a multi-session process between the RM and the RMA a variety of services between RSU and OBU are provided. In addition, the system is designed and implemented using GPS to provide a variety of services, for the services provided from each RMA by configuring them as an independent session so it enables a variety of services implemented from one of RSU. With the result of the comparative analysis on the multi-session processing and single-session processing it shows that the differenes of them are minor in repect of the data loss rate and the data transfer rate but various services can be provided.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1749-1753
• /
• 2003

We proposed several systems for 1Giga bit Modem. The first, Binary ASK(Amplitude Shift Keying) system has a high speed shutter transmitter and no IF(Intermediate Frequency) receiver only by symbol synchronization. The advantage of proposed system is that circuitry is very simple without IF process. The disadvantage of proposed system are that line spectrum occurs interference to other channels, and enhancement to 4-level system is impossible due to its large SNR degradation. The second, Binary phase modulation system has a high speed shutter transmitter and IF-VCO(IF-Voltage Controlled Oscillator) control by base-band phase rotation. Polarity of shutter window is changed by the binary data. The window should be narrow same as above ASK. The advantage of proposed system is which error rate performance is superior. The disadvantage of proposed system are that Circuitry is more complex, narrow pull-in range of receiver caused by VCO and spectrum divergence by the non-linear amplifier. The third, 4-QAM(Quadrature Amplitude Modulation)system has a nyquist pulse transmitter and IF-VCO control by symbol clock. The advantage of proposed system are that signal frequency band is a half of 1GHz, reliable pull-in of VCO and possibility of double speed transmission(2Gbps) by keeping 1GHz frequency-band. The disadvantage of proposed system are that circuit complexity of pulse shaping and spectrum divergence by the non-linear amplifier.