• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.465-473
• /
• 2011

To find the optimum mixing ratio of WGS catalyst with $CO_2$ absorbent for SEWGS process, water gas shift reaction tests were carried out in a fluidized bed reactor using commercial WGS catalyst and sand (as a substitute for $CO_2$ absorbent). WGS catalyst content, gas velocity, and steam/CO ratio were considered as experimental variables. CO conversion increased as the catalyst content increased during water gas shift reaction. Variations of the CO conversion with the catalyst content were small at low gas velocity. However, those variations increased at higher gas velocity. Within experimental range of this study, the optimum operating condition(steam/CO ratio=3, gas velocity = 0.03 m/s, catalyst content=10 wt.%) to get high CO conversion and $CO_2$ capture efficiency was confirmed. Moreover, long time water gas shift reaction tests up to 20 hours were carried out for two cases (catalyst content = 10 and 20 wt.%) and we could conclude that the WGS reactivity at those conditions was maintained up to 20 hours.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.514-517
• /
• 2008

Water gas shift(WGS) is an important step in fuel process for fuel cells, and improperness of commercial WGS catalysts for use in fuel cell systems has prompted numerous researches on noble metal catalysts. A selected noble metal catalyst for water gas shift reaction(WGS) was prepared with various metal loadings. The prepared catalysts were tested under two feeding conditions. At moderate residence time, carbon monoxide conversion was much higher on the noble metal catalysts as compared to commercial high-temperature shift catalyst. Effects of metal loading were examined by activity tests at short residence time. Higher metal loading effected higher reaction rate. The kinetic data was fitted to simple reaction equations and effectiveness factor was estimated. The results suggest the necessity of a structural design for the highly active noble metal catalysts.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.905-912
• /
• 2011

In this study, the novel concept catalytic reactor was designed for water-gas shift reaction (WGS) under high pressure. The novel concept catalytic reactor was composed of an autoclave, the catalyst, and liquid water. Cu-ZnO/$Al_2O_3$ as the low temperature shift catalyst was used for WGS reaction. WGS in the novel concept catalytic reactor was carried out at the ranges of 150~$250^{\circ}C$ and 30~50 atm. The liquid water was filled at the bottom of the autoclave catalytic reactor and the catalyst of pellet type was located at the gas-liquid water interface. It was concluded that WGS reaction occurred over the surface of catalysts partially wetted with liquid water. The conversion of CO for WGS was also controlled with changing content of Cu and ZnO used as the catalytic active components. Meanwhile, the catalyst of honey comb type coated with Cu-ZnO/$Al_2O_3$ was used in order to increase the contact area between wet-surface of catalyst and the reactants of gas phase. It was confirmed from these experiments that $H_2$/CO ratio of the simulated coal gas increased from 0.5 to 0.8 by WGS at gas-liquid water interface over the wet surface of honey comb type catalyst at $250^{\circ}C$ and 50 atm.

• 청정기술
• /
• 제29권4호
• /
• pp.321-326
• /
• 2023

최근 탄소중립과 관련하여 연소 시 이산화탄소 배출이 없어 청정한 수소에너지에 대한 관심이 증가하고 있다. 이에 따라 수소 생산에 관련된 연구가 계속되고 있으며 본 연구에서는 폐기물을 처리함과 동시에 고순도 수소를 생산하기 위해 폐기물 유래 합성가스를 수성가스전이반응에 적용하였다. 마그네슘을 세륨과 함께 지지체로 사용하여 고온수성가스전이(HT-WGS)반응에서 촉매의 활성을 향상시키고자 하였다. HT-WGS 반응의 활성물질로 구리를 사용해 Cu-CeO₂-MgO 촉매를 제조하였으며, 제조방법에 따른 촉매활성 연구를 진행하였다. HT-WGS 반응 결과 함침법으로 제조된 Cu-CeO₂-MgO 촉매가 가장 높은 활성을 보였으며, 이는 가장 높은 산소 저장능과 많은 활성 Cu 종을 가지는 특성에 기인한 결과이다.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.337-345
• /
• 2012

To check effects of operating variables on reaction characteristics of WGS catalyst for SEWGS process, water gas shift reaction tests were carried out in a pressurized fluidized bed reactor using commercial WGS catalyst and sand(as a substitute for $CO_2$ absorbent) as bed materials. Simulated syngas(mixed with $N_2$) was used as a reactant gas. Operating temperature was $210^{\circ}C$ and operating pressure was 20 bar. WGS catalyst content, steam/CO ratio, gas velocity, and syngas concentration were considered as experimental variables. CO conversion increased as the catalyst content and steam/CO ratio increased. CO conversion at fluidized bed condition was higher than that of fixed bed condition. However, CO conversion were maintained almost same value within the fluidized bed condition. CO conversion decreased as the syngas concentration increased. The optimum operation condition was confirmed and long time water gas shift reaction test up to 24 hours at the optimum operating conditions was carried out.

• 한국수소및신에너지학회논문집
• /
• 제23권2호
• /
• pp.111-116
• /
• 2012

Na promoted Pt/$CeO_2$ catalysts with various Na amounts (1, 2, and 3wt%) have been applied to water gas shift reaction (WGS) at a gas hourly space velocity (GHSV) of 45515 $h^{-1}$. 1wt%Pt-2wt%Na/$CeO_2$ catalyst exhibited the highest WGS activity at $240^{\circ}C$ among the catalysts prepared in this study. In addition, 1wt%Pt-2wt%Na/$CeO_2$ catalyst showed relatively stable activity with time on stream. The high activity/stability of 1wt%Pt-2wt%Na/$CeO_2$ catalyst was correlated to its easier reducibility and higher oxygen storage capacity (OSC). As a result, 2wt% Na promoted Pt/$CeO_2$ can be a promising candidate catalyst for the single stage WGS, which requires high intrinsic activity at very high GHSV.

• 멤브레인
• /
• 제20권3호
• /
• pp.228-234
• /
• 2010

본 연구에서는 Water Gas Shift (WGS) 반응이 일어나는 분리막 반응기 (MR) 대상공정에 대해서 동적모사 (dynamic simulation)를 실시하고 시간과 위치에 따른 온도 및 수소 농도 변화 등을 살펴보았다. 모사 결과에 의하면 도입부에서 반경방향으로의 수소 농도, 수소 분압 및 온도차가 가장 컸으며 출구에서 가장 작았다. 또한, 수소분압의 차이가 가장 큰 도입부에서 수소의 flux가 가장 크게 나타나며 출구에서 일산화탄소의 전환률은 0.65였다.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.358-364
• /
• 2012

철 촉매를 이용한 Fischer-Tropsch 합성 반응과 수성 가스 전환 반응에 대한 반응 메커니즘과 반응 속도식을 5 채널 고정층 반응기를 이용하여 조사하였다. 실험 조건은, 반응물 합성가스 $H_2$/CO 비 0.5~2, 반응물 공급 유량 60~80 ml/min, 반응 온도 $255{\sim}275^{\circ}C$로서 반응 압력은 1.5 MPa을 유지하였다. F-T 합성 반응의 반응 속도식($r_{FT}$)은 반응 속도 결정 단계로서 분자로 흡착된 CO와 기상의 수소 분자와의 반응을 바탕으로 하는 Eley-Rideal 반응 메카니즘을 통해 계산되었고, WGS 반응의 반응 속도식($r_{WGS}$)은 formate 중간체 생성 반응을 반응 속도 결정 단계로 가정하여 결정되었다. 실험 결과, F-T 합성 반응의 반응 속도식과 WGS 반응의 반응 속도식은 각각 탄화수소 생성과 $CO_2$ 생성에 대한 반응 속도 실험값을 잘 모사하였고, 또한 power law에 근거한 CO 전환 반응에 대한 반응 속도식도 실험값과 잘 일치하였다. 이처럼, 각각의 반응 메카니즘을 바탕으로 도출된 반응 속도식($r_{FT}$, $r_{WGS}$, $-r_{CO}$)은 실험값과 여러 가지 기존 문헌에서 보고된 반응 속도식 모델과 잘 일치하였다.

• 한국수소및신에너지학회논문집
• /
• 제27권5호
• /
• pp.494-502
• /
• 2016

A 1-dimensional heterogeneous reactor model with the gas-solid interfacial phase gradients was developed for the simulation of the packed bed reactor where the exothermic reversible water gas shift reaction for the natural gas steam reformed gas was proceeding in adiabatic mode. Experimental results obtained over the WGS catalyst, C18-HA, were best simulated when the frequency factor of the reaction rate constant was adjusted to a half the value reported over another WGS catalyst, EX-2248, having the same kinds of active components as the C18-HA. For the reactor of the inside diameter 158.4 mm and the bed length 650 mm, the optimum feeding temperature of the reformed gas was simulated to be $194^{\circ}C$, giving the lowest CO content in the product gas by 1.68 mol% on the basis of dried gas. For reactors more extended in the bed length, the possible lowest CO content in the product gas with the optimum feeding temperature of the reformed gas were suggested.

• 한국수소및신에너지학회논문집
• /
• 제30권2호
• /
• pp.103-110
• /
• 2019

Cu-Zn-Al catalysts were prepared via co-precipitation method for low-temperature water-gas shift (LT-WGS) reaction under practical reaction condition. Aging time was systematically changed to find optimum point for LT-WGS under practical condition. The Cu-Zn-Al catalyst aged for 72 hours showed the highest CO conversion within low-temperature range as well as very stable catalytic activity for 200 hours despite the practical reaction condition.