• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1830-1833
• /
• 2000

The relationships between driving voltage and the wall charge distribution in the address period of surface discharge type AC Plasma Display Panel have been investigated. The quantity of wall charge on each electrode are detected simultaneously from the electrode current after applying only one addressing discharge pulse. The wall charge Qy on the scan electrode Y is nearly the sum of Qx on the address electrode X and Qz on the sustain electrode 2. The Qy increased with the driving voltage regardless of the kind of electrode, whereas the address time Td decreased, Qz and Qy are increased considerably with the blocking voltage Vz, whereas Qx is decreased. The increase rate of Qx, Qy and Qz for increase in Vz was $-13{\times}10^{-2}$(pc/Vz), and $60{\times}10^{-2}$(pc/Vz) and $70{\times}10^{-2}$(pc/Vz), respectively.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권10호
• /
• pp.506-510
• /
• 2002

In this paper, we study on the mutual characteristics between transmitting efficiency of pulse energy and wall plug consumed power of non-thermal Plasma for removing environmental pollutive gas of coal plant. To obtain high pulse energy of our system, we used MPC(magnetic pulse compressor) of power switch and tested their characteristics by adjusting electrode length of reactor and charging voltage in capacitor. As a result, we obtained consumed power of wall plug and a compressed pulse of voltage 110kV, rising time 500ns. Impedance of load on increasing electrode length was decreased, but electrical efficiency was increased. These results indicate we can control critical voltage of pulse corona and electrical efficiency of economic cost in power plant.

• 전자공학회논문지
• /
• 제52권1호
• /
• pp.135-139
• /
• 2015

플라즈마 디스플레이 패널의 각 부화면 시간동안 기입 방전의 지연시간을 각각 조사하였고 오방전이 발생하지 않는 범위내에서 추가 주사전압의 높이를 다르게 인가하여 모든 부화면 시간동안 기입방전 지연시간을 단축시키기 위한 수정된 구동방법을 제시한다. AC PDP에서 첫번째 초기화 기간 동안 주사전극에 높은 상승 경사파 전압을 인가하여 약한 플라즈마 방전이 발생하고 셀 내부에서 프라이밍 입자와 벽전하 생성을 유도한다. 생성된 벽전하는 셀 내부 벽전압이 되므로 기입기간 중 기입전압과 더해져서 기입 방전을 일으킨다. 그러나 셀 내부의 벽전하는 시간이 지나면서 점차 소멸되므로 1 TV 프레임 시간 동안 각 부화면 시간동안 기입방전은 늦게 발생한다. 첫 번째 부화면 시간에는 초기화 기간 동안 상승 경사파를 갖는 높은 전압에 의해 벽전하가 많이 남아 있으므로 첫 번째 기입 방전은 다른 부화면 시간보다 빠르게 형성된다. 한편, 두 번째부터 마지막 부화면 시간까지의 기입 방전 생성시간은 셀 내의 벽전하 소멸에 의하여 점차적으로 늦어진다. 본 연구에서는 각 부화면 시간동안 기입방전의 시간지연을 조사하였고, 부화면 시간의 기입기간 마다 추가 주사전압을 다르게 인가하여 전체 기입방전지연시간을 단축시켰다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제16회 학술발표회 논문개요집
• /
• pp.187-187
• /
• 1999

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2233-2235
• /
• 1999

The ac plasma display panel(PDP) is a flat light-emitting gas discharge device. Discharge gases directly take effects to the discharge phenomena of ac PDP. Therefore it is necessary to understand the characteristics of the discharge gases. In this paper, we have studied the effects of discharge gases by voltage transfer curves which show the discharge characteristics of ac PDP and the change of the effective wall capacitance during a discharge which depends on lateral spreading of charge distribution and the strength of discharge. As gas pressure increases, memory margins increases. and the firing voltage of a mixed gas is lower than that of a single gas such as He gas. The minimum sustain voltage and the maximum sustain voltage or firing voltage increases with decrease in the frequency. The effective wall capacitance increases as the discharge strength that is, the gap voltage between discharge electrodes increases.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.237-237
• /
• 1999

전극폭 300um, 전극간격 100um, 격벽높이 130um로 자체 제작한 테스트 패널에서 방전개시전압과 최소 방전유지전압 사이에서 방전유지전압 변화에 따른 벽전하, 벽전압을 측정하였다. 이 실험에서는 Ne가스와 Ne-Xe 혼합가스를 이용하였다. 이 결과로부터 방전유지전압 변화에 따른 벽전하, 벽전압을 통하여 최적의 방전유지전압 조건을 결정할 수 있으며, 이는 AC-PDP의 효율 향상에 기여할 것으로 판단되어 진다.

• 설비공학논문집
• /
• 제18권12호
• /
• pp.1033-1038
• /
• 2006

We carried out the experiments on particle deposition onto the cleanroom wall panels. And then we investigated the particle deposition characteristic coefficients for electrostatic voltages and particle size. It was found that there is little difference in characteristics of the particle deposition between the steel panel and the anti-static coating panel. In case of that the particle size is under $1.0{\mu}m$, the particle deposition characteristic coefficient becomes larger as the electrostatic voltage induced to the cleanroom wall panel is increasing. Where in case of that the particle size is over $3.0{\mu}m$, the particle deposition characteristic coefficients do not show any differences with the electrostatic voltages. It is due to that the electrostatic force is the major particle transport mechanism for submicron particles, while the gravitational settling is the major particle transport mechanism for overmicron particles when the electro-static voltages are induced to the cleanroom wall panel.

• Journal of Information Display
• /
• 제1권1호
• /
• pp.42-47
• /
• 2000

The relationship between driving voltage and the amount of wall charge in the address period of surface discharge type AC Plasma Display Panel has been investigated. The amount of wall charge on each electrode is obtained simultaneously from the current profiles after applying only one addressing discharge pulse. The wall charge $Q_y$ on the scan electrode Y is almost the sum of $Q_x$ on the address electrode X and $Q_z$ on the sustain electrode Z. The $Q_y$ increased with the driving voltage regardless of the kind of electrode, whereas the addressing $T_d$ decreased. The $Q_x$ and $Q_y$ are increased considerably by blocking voltage $V_z$, whereas $Q_x$ is decreased. The $V_z$ dependence of $Q_x$ $Q_y$ and ${\varrho}_z$ in addressing discharge was $-13{\times}10^{-2}$ (pc/$V_z$), and $60{\times}10^{-2}$ ($pc/V_z$) and $70{\times}10^{-2}(pc/V_z)$, respectively.

• 한국전기전자재료학회논문지
• /
• 제20권7호
• /
• pp.650-657
• /
• 2007

This paper had mentioned about CCP light source application for increasing the efficiency of Xe lamp the mercury-free lamp. In order to increase the efficiency of Xe EEFL, we designed and manufactured the lamp used by mixture gas of Xe, Ne and He. Also, we have analyzed the electrical and optical properties with the firing voltage, sustain voltage, paschen's curve, wall charge, and capacitance. As a result, the firing voltage decreased by increasing the ration of mixture gas. and, It is owing to include the gas with high ionization energy. The firing voltage decreased in condition happening the penning effect, Because the ion of metastable state created from penning effect, Which can encourage the ionization phenomena. Also, the wavelength of 467.12 is increase. because of the energy transition in the wavelength of 147 nm. therefore, we can know about the affection of phosphor with UV emission properties. Through an experiment, Xe 100 % and Xe 75 % confirmed same spectrum properties by each mixture gas ratio. In the case of Xe 50 %, spectrum properties appeared Xe discharge and Ne-He discharge. That analyzed an electrical and optical properties. Therefore, confirmed that is excellent because properties of firing voltage, wall charge, capacitance in Xe 50 %, Ne : He = 9 : 1. We offered parameter in inverter manufacture and lamp manufacture by electrical and optical properties.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.119-123
• /
• 2011

We have investigated the luminous efficiency of various cell resolution and structure from 50" FHD to 50" QFHD Plasma Display. The suggested test panels have two different cell array types which are the delta and matrix cell array type. The results showed that, in the case of the suggested QFHDs, the firing and sustain voltage were increased and voltage margin was decreased. These results are caused by the reduced wall voltage and increased charged particle loss, at the side wall. The luminance of the suggested QFHDs was lower from 20% to 40% than that of the suggested FHDs and the power consumption was higher from 42% to 83% than that of the suggested FHDs. In conclusion, the maximum luminous efficiency of the suggested QFHD(D110) has reached about 38%, compared with suggested FHDs($\fallingdotseq$ 2.7 lm/W).