• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.200-203
• /
• 2000

In this paper, we describes the design of a CPU compatible with ARM9 processor. The CPU is fully synthesizable and described in Verilog-XL. Starting from the synthesizable ARM7 compatible CPU we developed earlier, we modified its pipeline to five stages. For this we first partition the behaviors of each instruction into five stage pipeline operations. Then we designed the controller and the datapath considering the forwarding or interlock schemes. Finally the compatibility of the designed CPU is verified by comparing the results of every instruction executed in test programs with those of the reference simulator developed for the ARM7 compatible CPU.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.232-235
• /
• 1999

In this paper, we present a coprocessor that can operate with ARM microprocessors. The coprocessor supports IEEE 754 standard single- and double-precision binary floating point arithmetic operations. The design objective is to achieve minimum-area, low-power and acceleration of processing power of ARM microprocessors. The instruction set is compatible with ARM7500FE. The coprocessor is written in verilog HDL and synthesized by the SYNOPSYS Design Compiler. The gate count is 38,115 and critical path delay is 9.52ns.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.8
• /
• pp.1085-1090
• /
• 1995

The Discrete Cosine Transform(DCT) is effective technique for image compression, which is widely used in the area of digital signal processing. In this paper, an efficient DCT processor is proposed and simulated by using Verilog HDL. This algorithm is improved 60% in processing speed, but it's somewhat complicate compared with Y. Arai's algorithm. This algorithm will be used efficiently for real time image processing.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.365-368
• /
• 2003

In this Paper, we report a design of Serial ATA Transpor layer. The functionalities of the Serial ATA transport layer are first described on RTL via verilog. The compiled code are then fed to a synthesizer synopsys to get the actual hardware from 0.35$\mu\textrm{m}$ SAMSUNG standard cell library. The designed functionalities of this chip will be verified using test bold with FPGA equipment and ATS2 digital test equipment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.53-58
• /
• 2008

This paper designs sigma-delta D/A Converter with a high resolution and low power consumption. It reorganizes the input data along LJ, RJ, I2S mode and bit mode to the output data of A/D converter. The D/A converter decodes the original analog signal through HBF, Hold and 5th CIFB(Cascaded Integrators with distributed Feedback as well as distributed input coupling) sigma-delta modulation blocks. It uses repeatedly the addition operation in instead of the multiply operation for the chip area and the performance. Also, the half band filters of similar architecture composed the one block and it used the sample-hold block instead of the sinc filter. We supposed simple D/A Converter decreased in area. The filters of the block analyzed using the matlab tool. The top block designed using the top-down method by verilog language. The designed block is fabricated using Samsung 0.35um CMOS standard cell library. The chip area is 1500*1500um.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2569-2578
• /
• 2009

Core-A microprocessor is the all-Korean product designed as 32-bit embedded RISC microprocessor developed by KAIST and supported by the Industrial Property Office. This paper analyze Core-A microprocessor architecture and proposes efficient method to interface Core-A microprocessor with coprocessor. To verify proposed interfacing method, the AES cryptography processor that has 128-bit key and block size is used as a coprocessor. Coprocessor and AES are written in Verilog-HDL and verified using Modelsim simulator. It except AES module consists of about 3,743 gates and its maximum operating frequency is about 90Mhz under 0.35um CMOS technology. The proposed coprocessor interface architecture is efficiency to send data or to receive data from Core-A to coprocessor.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.90-97
• /
• 2006

In this paper, we present a cost-effective architecture of high-speed soft-decision Viterbi decoder for Multi-band OFDM(MB-OFDM) systems. In the design of modem for MB-OFDM systems, a parallel processing architecture is general]y used for the reliable hardware implementation, because the systems should support a very high-speed data rate of at most 480Mbps. A Viterbi decoder also should be designed by using a parallel processing structure and support a very high-speed data rate. Therefore, we present a optimized hardware architecture for 4-way parallel processing Viterbi decoder in this paper. In order to optimize the hardware of Viterbi decoder, we compare and analyze various ACS architectures and find the optimal one among them with respect to hardware complexity and operating frequency The Viterbi decoder with a optimal hardware architecture is designed and verified by using Verilog HDL, and synthesized into gate-level circuits with TSMC 0.13um library. In the synthesis results, we find that the Viterbi decoder contains about 280K gates and works properly at the speed required in MB-OFDM systems.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.226-231
• /
• 2022

The concept of information entropy has been widely applied in various fields. Recently, in the field of image processing, many technologies applying the concept of information entropy have been developed. As the importance and demand of computer vision technologies increase in modern industry, real-time processing must be possible in order for image processing technologies to be efficiently applied to modern industries. Extracting the entropy value of an image is difficult to process in real-time due to the complexity of computation in software, and a hardware structure of an image entropy filter capable of real-time processing has never been proposed. In this paper, we propose for the first time a hardware structure of a histogram-based entropy filter that can be processed in real time using a barrel shifter. The proposed hardware was designed using Verilog HDL, and Xilinx's xczu7ev-2ffvc1156 was set as the target device and FPGA was implemented. As a result of logic synthesis using the Xilinx Vivado program, it has a maximum operating frequency of 750.751 MHz in a 4K UHD high-resolution environment, and it processes more than 30 images per second and satisfies the real-time processing standard.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.41-49
• /
• 2008

This paper presents a design of the control block of a passive UHF RFID tag IC according to EPCglobal Class-1 Generation-2 UHF RFID 1.1.0 Protocol. The control block includes a PIE block, CRC5/CRC16, a Slot Counter, a Random Number Generator, a Main Control Block, a Encoder and a Memory Interface. The control block has been designed using the Verilog HDL and has been simulated. Functional simulation results for the overall control block operation show that 11 instructions with 7 states are operated correctly. Also, the control block has been implemented with 36,230 gates by Synopsys Design Compiler and Apollo using Magnachip 0.25$\mu$m technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.939-946
• /
• 2009

In this paper, we propose a new network ASIP(Application Specific Instruction-set Processor) which was designed for simulation models by a machine descriptions language LISA(Language for Instruction Set Architecture). This network ASIP is aimed for an exclusive engine undertaking packet processing in a router. To achieve the purpose, we added a new necessary instruction set for processing a general ASIP based on MIPS(Microprocessor without Interlock Pipeline Stages) architecture in high speed. The new instructions can be divided into two groups: a classification instruction group and a modification instruction group, and each group is to be processed by its own functional unit in an execution stage. The functional unit was optimized for area and speed through Verilog HDL, and the result after synthesis was compared with the area and operation delay time. Moreownr, it was allocated to the Macro function ana low-level standardized programming language C using CKF(Compiler Known Function). Consequently, we verified performance improvement achieved by analysis and comparison of execution cycles of application programs.