• 제목/요약/키워드: Velocity slope

검색결과 425건 처리시간 0.032초

굴절파 GRM 해석방법을 응용한 고경사 단층 인지 (Ⅱ) -실제 자료 적용- (Identification of high-dip faults utilizing the GRM technique of seismic refraction method(Ⅱ) -Application to real data-)

  • 김기영;우남철
    • 지구물리
    • /
    • 제2권1호
    • /
    • pp.65-74
    • /
    • 1999
  • 양산단층이 통과하는 언양 부근에서 기록한 굴절파 4개 측선자료를 대상으로 구배변화 지시자를 구하고 단층 분포상태를 해석하였다. XY=3 m인 속도분석 함수를 이용하여 구한 대상 굴절면의 평균속도는 2,250-2,870 m/s 정도이며, 가장 서쪽에 위치한 측선 1은 다른 측선보다 굴절파 속도가 약 600 m/s 정도 작게 나타난다. XY값이 6 m와 0 m인 속도분석 함수의 차이를 이용하여 구한 구배변화 지시자의 진폭이 0.5 ms/m 이상인 곳은 고해상도 반사파 단면상에 해석된 단층위치와 대체로 일치하며, 전반적으로 한 개의 측점간격(3 m) 정도 벗어난 양상을 보인다. 진폭이 큰 구배변화 지시자는 35번 국도를 중심으로 밀집되어 나타나며, 가장 큰 단층은 지질도상의 예상단층선에서 약 930 m 서쪽에 위치하는 것으로 해석된다.

  • PDF

엔트로피 컨셉을 이용한 등류수로 마찰속도식 제안 (The Proposal for Friction Velocity Formula at Uniform Flow Channel Using the Entropy Concept)

  • 추태호;손희삼;윤관선;노현석;고현수
    • 한국콘텐츠학회논문지
    • /
    • 제15권2호
    • /
    • pp.499-506
    • /
    • 2015
  • 마찰속도란 벽면 가까이의 흐름에서 벽면의 마찰 응력과 밀도로 정의되는 속도의 차원을 갖는 양이다. 또한 마찰속도는 바닥 흐름에서 전단력을 나타내는 수리학적 매개변수이다. 게다가 개수로 설계나 하천, 해안에서 유사 및 물질의 거동을 파악하는데 정확한 마찰속도의 산정이 매우 중요하며 주 흐름방향의 혼합계수를 결정하는데 필수적인 요소이다. 이러한 마찰속도를 산정하는 방법들은 하상경사를 이용하는 방법, 레이놀즈 응력분포를 이용하는 방법, 점성저층에서 평균유속의 선형법칙을 이용하는 방법, 벽 전단 응력의 직접적 측정방법 등이 있다. 본 연구에서는 기존 방법과 달리 확률통계 기법에 사용되는 엔트로피 개념에 접목하여 새로운 마찰속도공식을 제안하였고, 이를 검증하기 위해 Song의 실측 실험데이터를 이용하였다. 제안한 공식과 마찰속도 공식에 의해 산정된 마찰속도의 결정계수는 0.999-1.000로 잘 일치한 것으로 분석되었다.

하천제방의 월류 붕괴 메커니즘 규명을 위한 모형실험 (Model Tests for Examination of Overflow Failure Mechanism on River Levee)

  • 김진만;박민철;문인종;진윤화
    • 한국지반신소재학회논문집
    • /
    • 제16권1호
    • /
    • pp.41-52
    • /
    • 2017
  • 본 연구에서는 월류에 의한 붕괴 메커니즘의 규명을 위해 모형제방(제방고 0.4~0.8m)과 실물제방(제방고 1.0m)을 대상으로 월류 붕괴실험을 수행하였다. 월류에 의한 제방붕괴는 1단계에서는 월류에 의해 비탈표면에서 세굴이 발생되었으며, 월류의 유속은 완만히 증가되었다. 2단계에서는 붕괴단면이 커지고 유속도 급격히 증가되었다. 3단계에서는 월류에 의해 제방 단면이 완전히 붕괴되고 붕괴면적이 넓어져 유속이 상대적으로 감소되었다. 월류에 의한 제방의 붕괴각(${\theta}$)은 큰 자중, 감소된 전단저항력 및 월류의 흐름에 의한 추가 소류력으로 인해 랭킨토압의 사면붕괴각보다 크게 나타났다. 제방고(H)가 증가될수록 월류에 의한 제방의 월류 유속(${\upsilon}$)이 증가되었으며, 이로 인해 소류력이 추가로 작용되어 제방의 붕괴각(${\theta}$)과 붕괴면적(A)이 함께 증가되었다. 모형실험과 실물실험에 사용된 모래 시료가 동일한 입경크기로 한계세굴유속이 같아 월류 유속변화에 의해 세굴 특성이 지배되는 것으로 나타났다.

속도계측형 호흡기류센서에서 상승시간을 고려한 최고호기유량의 교정 기법 (Compensation of Peak Expiratory Air Flow Rate Considering Initial Slope in Velocity Type Air Flow Transducer)

  • 차은종;이인광;김성식;김완석;박경순;김원재;김경아
    • 전기학회논문지
    • /
    • 제58권4호
    • /
    • pp.867-872
    • /
    • 2009
  • Peak expiratory flow rate(PEF) is one of the most important diagnostic parameters in spirometry. PEF occurs in a very short duration during the forced expiratory maneuver, which could lead to measurement error due to non-ideal dynamic characteristic of the transducer. In such case the initial slope of the flow rate signal determines the accuracy of the measured PEF. The present study considered this initial slope as a parameter to compensate PEF. The 26 standard flow rate signals recommended by the American Thoracic Society(ATS) were flown through the air flow transducer followed by simultaneous measurements of PEF and maximum transducer output$(N_{PEF})$. $N_{PEF}$-PEF satisfied a quadratic equation in general, however, two signals (ATS #2 and #26) having large initial slopes deviated from the fitting equation to a significant degree. The relative error was found to be in a linear relationship with the initial slope, thus, $N_{PEF}$ was appropriately compensated to provide accurate PEF with mean relative error less than only 1%. The 99% confidence interval of the mean relative error was less than a half of the error limit of 5% recommended by ATS. Therefore, PEF can be very accurately determined by compensating the transducer output based on the initial slope, which should be a useful technique for air flow transducer calibration.

안동시 위리의 사면파괴 지역에 대한 지표 물리탐사 (Surface Geophysical Investigations of a Slope-failure Terrane at Wiri, Andong, Korea)

  • 김지수;한수형;정교철
    • 자원환경지질
    • /
    • 제34권2호
    • /
    • pp.193-204
    • /
    • 2001
  • 1997년 집중호우 때 지반 침하와 융기 현상이 발생했던 안동시 위리 지역의 지하구조와 사면활동의 기구가 된 단층대를 규명하기 위해 전기비저항 수직 및 쌍극자탐사, 탄성파굴절법 및 반사법탐사를 실시하였다. 사면 변형의 가장 주된 원인으로 알려진 점토층은 탐사 결과 $100{\Omega}{\cdot}m$ 이하의 전기비저항, 400m/s 이하의 탄성파속도로 특징되며, 사면침하와 관련된 북북서 단층은 약 $18^{\circ}$의 경사로 비교적 완만하게 나타나고, 지반 융기와 관련된 도로 인근의 북북동 단층은 거의 수직으로 나타난다. 사면활동 당시 사면에서 일어난 침하 현상은 북북서 단충면을 따라 점토가 거동하며 생긴 반면 도로 지반의 융기는 북북동 수직 단층을 통하여 점토가 올라 온 현상으로 해석된다.

  • PDF

등척성 운동시 운동강도에 따른 중앙주파수의 특성 (Characteristics of Median Frequency According to the Load During Fatiguing Isometric Exercise)

  • 이수영;신화경;조상현
    • 한국전문물리치료학회지
    • /
    • 제10권3호
    • /
    • pp.141-149
    • /
    • 2003
  • Median frequency can be regarded as a valid indicator of local muscle fatigue. As local muscle fatigue develops, the muscle fiber conduction velocity decreases, the fast twitch fibers are recruited less, and consequently the median frequency shifts toward the lower frequency area. The aim of this study was to test the characteristics of the median frequency according to exercise load (30% and 60% of MVC on the biceps brachii, 40% and 80% of MVC on the vastus lateralis) during the fatiguing isometric exercise. Thirteen healthy male volunteer students of Yonsei University were recruited. After the testing maximal voluntary isometric contraction, three variables (initial median frequency, regression slope, fatigue index) from the regression line of MDF data were measured in each exercise load. The results showed that the regression slope and fatigue index were significantly different for the biceps brachii, but not for the vastus lateralis initial MDF was not significant difference according to the exercise load on both muscles. The regression slope and fatigue index could monitor physiologic muscle change during fatiguing isometric exercise. The results showed that two MDF variables reflect the local muscle fatigue according to the exercise load.

  • PDF

자연사면에서 기반암 및 지질특성을 탐지하기 위한 지구물리 조사 (Geophysical Investigation for Detecting a Bedrock and Geological Characterization in Natural Slope)

  • 박종오
    • 지질공학
    • /
    • 제19권1호
    • /
    • pp.1-8
    • /
    • 2009
  • 지구물리 탐사는 대전대학교에 위치한 자연사면의 상부에서 2개 측선을 실시하였다. 전기비저항 탐사와 탄성파 굴절법 탐사는 천부에 퍼한 지층 경계, 풍화대 지역 및 지질 특성을 파악하기 위해 실시한 반면, AMT 탐사는 비교적 깊은 심도에 대한 정보를 얻기 위해 측선 2에서 병행하였다. 탐사 결과를 보면, 전기비저항 탐사와 탄성파 굴절법 탐사는 찾고자 하는 지질 특성에 관련하여 서로 일치하는 양상으로 나타났으며, AMT 탐사는 전반적인 기반암의 분포와 파쇄대에 대한 영상을 제시하였다. 그러므로 자연사면에서 복합 물리탐사의 적용은 지하 구조에 대해 상세한 정보를 제공하므로, 이를 통해 사면붕괴에 대해 보다 정확한 해석을 할 수 있다.

Integrated Navigation Design Using a Gimbaled Vision/LiDAR System with an Approximate Ground Description Model

  • Yun, Sukchang;Lee, Young Jae;Kim, Chang Joo;Sung, Sangkyung
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제14권4호
    • /
    • pp.369-378
    • /
    • 2013
  • This paper presents a vision/LiDAR integrated navigation system that provides accurate relative navigation performance on a general ground surface, in GNSS-denied environments. The considered ground surface during flight is approximated as a piecewise continuous model, with flat and slope surface profiles. In its implementation, the presented system consists of a strapdown IMU, and an aided sensor block, consisting of a vision sensor and a LiDAR on a stabilized gimbal platform. Thus, two-dimensional optical flow vectors from the vision sensor, and range information from LiDAR to ground are used to overcome the performance limit of the tactical grade inertial navigation solution without GNSS signal. In filter realization, the INS error model is employed, with measurement vectors containing two-dimensional velocity errors, and one differenced altitude in the navigation frame. In computing the altitude difference, the ground slope angle is estimated in a novel way, through two bisectional LiDAR signals, with a practical assumption representing a general ground profile. Finally, the overall integrated system is implemented, based on the extended Kalman filter framework, and the performance is demonstrated through a simulation study, with an aircraft flight trajectory scenario.

DEM 기반 조합방법에 의한 경사도 평가기법의 제안 (Suggestion of Slope Evaluation by DEM-based Aggregation Method)

  • 이근상;최연웅;조기성
    • 대한토목학회논문집
    • /
    • 제26권6D호
    • /
    • pp.1019-1023
    • /
    • 2006
  • DEM에 기초한 경사정보는 도시계획, 조경, 도로설계분야는 물론 강우유출 및 토사유실평가와 같은 수자원분야에서도 매우 유용하게 활용된다. DEM에서 추출한 경사도의 해상도는 응용분야 및 모델링의 종류에 따라 다양하게 결정될 수 있으며, 특히 해상도가 낮아질수록 수평거리가 증가하기 때문에 경사도는 감소하는 특징을 갖는다. 본 연구에서는 해상도에 따른 경사정보의 손실을 개선하고자 유량공식과 Manning의 유속공식을 조합한 경사도 평가기법을 제안하였으며, 토사유실모델의 지형인자를 계산하는데 활용하였다. 적용결과 기존의 경사도 평가기법을 이용한 지형인자는 34.8%의 오차를 나타낸 반면, 조합방법에 의한 경사도를 활용한 경우에는 12.6%로 비교적 낮은 오차특성을 확보할 수 있었다. 또한 지형특성에 따른 영향을 평가하기 위해, 유역내 상 중 하류 지역을 선정하여 조합방법에 의한 효용성을 평가한 결과, 조합방법이 기존방법에 비해 개선된 결과를 보였다. 따라서 조합방법에 의한 경사도 평가기법은 강우유출모델과 같은 수자원분야에서 해상도 변화에 따른 경사정보의 손실을 효과적으로 개선할 수 있을 있으리라 판단된다.

등가속도 운동에서 미적분의 기본 아이디어 학습 과정에 관한 사례연구 (A Case Study on Learning of Fundamental Idea of Calculus in Constant Acceleration Movement)

  • 신은주
    • 대한수학교육학회지:수학교육학연구
    • /
    • 제16권1호
    • /
    • pp.59-78
    • /
    • 2006
  • 본 연구에서는 먼저, 미적분에서 수학과 물리를 연결한 학습-지도의 필요성을 논의하고, 이를 위한 교수-학습 자료를 개발하여 제시한다. 그 후, 교수-학습 자료 중 하나를 활용하여 질적 사례연구를 하여 등가속도 운동을 탐구하는 활동에서 평균속도와 순간속도 개념이 발달되는 과정을 분석하였다. 연구대상자들은 등가속도 운동을 탐구하는 물리적 실험 상황에서 평균속도, 순간속도, 가속도 개념을 배웠다. 이 과정에서 학생들은 순간속도가 시간과 이동거리의 이차함수 그래프 위의 한 점에서 접선의 기울기를 의미한다는 점과 시간과 속도의 관계그래프 아래의 넓이 변화율이 이동거리의 변화율을 의미한다는 점을 이해할 수 있었다.

  • PDF