• Journal of the Ergonomics Society of Korea
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2007

As drivers spend more time in their cars, perception of driving a vehicle turns from utilizing a transportation means into residing in a personal space or even in moving office. Such a perception renders automobile manufacturers incorporate more vehicle functions, especially in-vehicle information systems As the number of system functions increases, the complexity of control and 2 types of display menus were designed after a literature review and a market analysis. With these controls and display menus, the experiment was performed to look into the difference of driver performance and preference on the integrated vehicle control type. Finally, the study suggests the integrated vehicle control type to minimize driver's cognitive load, and to use various functions efficiently. The study also discusses the practical use of the final integrated vehicle control type.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.3
• /
• pp.71-79
• /
• 2004

Owing to the rapid increase of the number of automobiles, the traffic is being heavily crippled as time goes by. To provide drivers with better safety and convenience, a variety of CNSs(Car Navigation System) are being installed more and more specially for the vehicles which are produced in recent days. As the CNS has gained the public popularity, it has been playing a role as a component of the multimedia system in a vehicle in addition to providing the capability of route guidance service. It is, therefore, now recognized as an important unit of the vehicle interior system. As the situation has been changed as formerly described, it is necessary that not only the functions but also the usability and exterior features are to be designed to suit customers' tastes. This paper is an attempt to find out what the major sensibility factors which customers want as far as a CNS is concerned are. Because these factors can differ from a vehicle type to another that customers prefer, the analysis is based on the vehicle preference. It is proved that MDS(Multi Dimensional Scaling) is an effective method to analyze the sensibility factors for the different types of vehicles. The result shows that for the people who prefer the sedan-type vehicles, luxuriousness, harmoniousness, and texture are major factors. For people who like sports car, faminism, salience, and dynamics are major factors. For people who prefer SUV's(Sports Utility Vehicle) or MPV's(Multi Purpose Vehicle), solidity, dynamics, and convenience are important.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.15-23
• /
• 2021

Personal Air Vehicle is expected to be a promising solution to relieve traffic congestion using urban airspace. The development of related technologies such as materials or batteries has been accelerated. In addition, commercial transportation services are being prepared. When fierce competition begins in the PAV market, even technologically superior products will disappear without choices by consumers. Therefore, demand factors should be reflected in PAV development to enhance competitiveness. In the paper, values were estimated for the major technological attributes of PAV. Stated preference data were collected through a survey, and the conjoint method and ordered probit model were adopted. Thereafter, it was confirmed that the value would be high in the order of dual mode, drone-type appearance, and noise reduction. Some R&D strategies were proposed based on this.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.2
• /
• pp.189-198
• /
• 2013

Objective: This research was carried out to study the menu type design of instrument cluster IVIS(In Vehicle Information System) for efficient navigation under deconcentrated situations. Background: A driver controls the IVIS menu using the rest of cognitive resources while driving a car. Although a driver controls the IVIS using extra cognition resources, his or her distraction can still cause some safety problems while driving. Menu type design of instrument cluster is absolutely important for safe and efficient navigation. Method: Four menu types including paging, flow, icon, and list type were identified through reviewing the existing IVIS of vehicle and the menu structure of cellular phone. Four menu types were evaluated through experiment. The experiment consisted of primary and secondary task, which the primary task was to simulate a driving and the secondary task was to control an IVIS menu prototype. Task performances, menu type preferences, and eye-movement patterns were measured in this experiment. Results: The result shows that icon type was the best design in aspect of task performance and preference. A clue for next menu item provided a positive effect for efficient menu navigation. It was identified that most of subjects gazed the middle-top area of IVIS screen from eye-movement pattern. Conclusion: A basic design of Instrument Cluster IVIS was proposed considering the result of this study in the final. Application: The results of this study can be effectively used in the design of Instrument Cluster IVIS.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.69-75
• /
• 2019

Remotely Piloted Aircraft (RPA) controls as a type of unmanned aerial vehicle (drone) is growing rapidly and its flight controller stick disposition is required standardization. We should standardize RPA drone flight control disposition because the flight pilot of RPA is hard to be trained so the flight controller stick differences impairs safety and wastes time and effort of flight controller industry. So this study researches the on-going standardization of RPA drone flight control disposition in Korea and foreign countries. Also this paper analyzes and researches of expert about RPA drone flight controller function and application of flight control mode. I accomplished expert research about standardization plan of unmanned flight control mode and confirm the necessity. Nowadays mode1 and 2 are mostly used in Korea so I carried out preference investigation for two modes. There were 4 preferences choices of RPA drone control mode necessity (importance) and recommendation of standardization modes. They answered that necessity of standardization is important considering pilot training, flight safety and positive development of drone industry. The result of standardization mode preference is that they prefer mode 2 (drone maker 86%, training facilities and research facilities 58%, government bureau 60%). Overall preference result shows that mode 1 24%, mode 1&2 16%, mode 2 60%. So they preferred mode 2 by 60%. The differences between two modes are the direction of throttle and pitch. Direction of throttle and pitch operate opposite way. They prefer mode 2 because mode 2 has similarities of manned flight control mode. Significance of this study is that it showed the necessity of standardization and flight control preference in a quantitative way. It will help drone standardization in related industries and development direction near future.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.213-220
• /
• 2018

The automobile industry in Korea is a very large industrial sector. Nowadays, as the interest in low carbon green growth grows all over the world, it is time to actively secure future competitiveness of the automobile industry. Therefore, it is essential to study consumer attitudes and intentions for electric vehicles at the time when technological and social changes are expected. This study was conducted to investigate the acceptability and preference of electric vehicle for 250 people. The results are as follows. As the monthly income and the number of residents increased, the decision was made to accommodate the electric vehicle. The larger the effect of the electric vehicle on the consumers, the more the electric car decided to accommodate the electric car. In addition, three demographic characteristics (monthly income, number of residents, residence type) showed that there was a difference in satisfaction of electric vehicles. As a result of analyzing the satisfaction level of the electric vehicle, it was found that the electric vehicle has a satisfactory effect on the consumer, the electric vehicle is about 3.5 times more satisfying, and the larger the interest of the electric car is, the more the electric car is about 2.1 times.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.351-357
• /
• 2019

A number of case studies and type analyzes have been conducted on mobility platform services that are rapidly evolving around the world. However, since the actual user experience is important for the development of the mobility service, research on the user side is needed. In the mobility platform service, only the car-hailing was used, and the preference factors were analyzed through the questionnaire in seven aspects of the user experience. Studies have shown significant differences according to gender. While the safety of the woman, the comfort and the kindness of the vehicle have a great influence on the satisfaction, the male affirms that the familiarity is the factor affecting the satisfaction. This study focused on the customer experience as a real user and identified key factors of selecting mobility platform service, so it is expected that it will contribute to the development of mobility platform service in the future.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.141-156
• /
• 2010

In this paper, understanding there is a limitation with a comprehensive and network approach for the evaluation of existing vehicle and pedestrian environments, the authors focus on developing an integrated approach to assessing these environments. The network evaluation here means the assessment at a three-dimensional level that includes evaluation methods of lines/axes in a spatial concept as well as integration of evaluation indicators being used for vehicles and the walking environment. Grey System Theory (GST) was applied based on the theoretical background for network and comprehensive integrated evaluation, and the evaluation of the vehicle and pedestrian environment was performed by assigning target areas to walking preference zones. As a result of the comprehensive evaluation and analysis by GST, even if the service level is the same as the operating indicators (Highway Capacity Manual) of the vehicle and pedestrian environment, or relatively better, it was identified that the total score could be varied over Grey Category because the observed data are calculated after considering the weights between evaluation indicators by the range of Grey Category on the comprehensive evaluation. Considering comprehensively these points, although the indicators on the operation of roads are relatively good, in the event that the indicators on the safety of roads are bad, it was known that the scores over Grey Category also could be changed. The result is that this evaluation method can be used to evaluate the network concept per lane (per axis) as well as to diagnose the current state by type of urban street in the future.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.380-385
• /
• 2008

To perform the navigation functions more efficiently, the navigation menu structure should be provided easy to understand to the driver in the vehicle environment that is restricted by driving workload, According to these conditions, to design better navigation interface, it is important to study on the navigation menu structure that is depend on the screen size and the information width and depth. Therefore, in this study we provided the different menu structures of 7-inch touchscreen LCD and 4-inch touchscreen LCD to the driver respectively in the driving simulator. Then, we compared the preference of each menu structures with the different touchscreen LCD.

• Proceedings of the ESK Conference
• /
• 1987.04a
• /
• pp.143-148
• /
• 1987

The Design of automotive IP must be designed for improving safety, and for satisfying the consumer's preference and for enlarging the usability of various gauges and information displaydevices. Also, these objects become more important by regarded and will be treated very sensitively for the next-generation vehicle concepts. Therefore, Automotive IP must be designed to adjust these trends, besides accord with car-inner lifestyle. One of these concept's designs is to apply Human Sensibility Ergonomics. This study suggestes the driver-centered design of the IP components that focused on the audio unit and HVAC(Heat and Ventilation Air Conditioner) through cognitive experiment. Primarily, analyzed components of IP in use, then, combined these components (especially, the number and arry of buttons, the position of LCD panel, etc.) nd designed some sample images(prototypes) the same as real size. After the subjects looked at the sam ples at the interval of 0.2/0.4/0.6 seconds, subjects should fill out the given forms from their memory. Then, the optimal prototype of IP was designed in respect to the correctness of cognition. The results will show the basic guideline of optimal design of IP that in the case of aaudio unit, the position of LCD, the array and the number of channel, in the case of HVAC, the position of LCD, TEMP button type and other button types.