• Title/Summary/Keyword: Variable structure control

Search Result 754, Processing Time 0.028 seconds

A New Integral Variable Structure Controller For Incorporating Actuator Dynamics

  • Lee, Jung-Hoon
    • Journal of IKEEE
    • /
    • v.10 no.2 s.19
    • /
    • pp.97-102
    • /
    • 2006
  • In this paper, a new simple integral variable structure controller is designed with incorporating the actuator dynamics. The formulation of the VSS (variable structure system) controller design includes integral augmented sliding surface and the dynamics of the actuator expressed as the state equation. An illustrative example is given to show the effectiveness of the developed controller.

  • PDF

Design of a Discrete Variable Structure Tracking Controller with Adaptive Feedforward Gains (적응 순방향 이득을 갖는 이산가변 구조추종 제어기의 설계)

  • 이성준;이강웅;최계근
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.25 no.3
    • /
    • pp.262-268
    • /
    • 1988
  • In this paper conditions are derived, which ensure the existence of a quasi-sliding mode on the control switching hyperplane in discrete variable structure control systems and also remove the reaching phase problem observed in continuous-time variable structure systems. In addition, a discrete variable structure tracking controller which has adaptive properties is devised based on these results. This controller has useful properties, such as small sensitivity to the variation of plant parameters and to disturbances and its performing speed is fast compared to that of other adaptive controller.

  • PDF

Fuzzy Variable Structure Control of Wheel-Driven Inverted Pendulum (바퀴구동 도립진자에 대한 퍼지 가변구조제어)

  • Yoo Byung-Kook
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.5 no.4
    • /
    • pp.301-307
    • /
    • 2004
  • This paper suggests a fuzzy variable structure control scheme for Takagi-Sugeno(T-S) fuzzy model and presents the attitude control of the wheel-driven inverted pendulum(WDIP) based on the proposed control algorithm. The proposed controller is designed based on the T-S fuzzy modeling of nonlinear system and the unification of gain matrices in linear subsystems that constitute the overall fuzzy model. The uncertainties generated in the gain matrix unifying procedure can be interpreted as the input disturbances of the conventional variable structure control. These unifying disturbances can be resolved by using the robustness property of the conventional variable structure system. Design example for wheel-driven inverted pendulum demonstrates the utility and validity of the proposed control scheme.

  • PDF

Design of nonlinear variable structure controller using differential geometric methods (미분기하학 방법을 이용한 비선형 가변구조 제어기 설계)

  • 함철주;함운철
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1993.10a
    • /
    • pp.1227-1233
    • /
    • 1993
  • In this paper we present the differential geometric approach for the analysis and design of sliding modes in nonlinear variable structure feedback systems. We also design the robust controller for the nonlinear system using variable structure control theory on the basis of differential geometric methods and feedback linearization applying Min-Max control based on the Lyapunov second method. The robustness against parameter uncertainties for robot manipulators with flexible joint is considered. Simulation results are presented and show the advantage of the proposed nonlinear control method.

  • PDF

A Study on the Variable -Structure Control Using New Switching Variables (새로운 스위칭 변수를 이용한 가변구조제어에 관한 연구)

  • 이주장;이흥규;이병일
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.25 no.12
    • /
    • pp.1586-1593
    • /
    • 1988
  • A new control scheme for the variable-structure control system using new time-varying switching variable is presented in this paper. It is proposed to have new algorithm for reducing the reaching time on a switching hyperplane by modifying the Morgan's algorithm. From the results of the simulation, it is concluded the proposed control algorithm yields smaller control inputs (without disturbance) and ripples (with disturbance) than that obtained by Morgan's algorithm in the steady-state. This control algorithm can be applied to proper control systems having sensitive effects on disturbances, due to the robustness.

  • PDF

A variable structure control algorithm incorporating actuator dynamics (구동부 동특성을 고려한 가변구조 제어 알고리듬)

  • 이정훈;신휘범;차동국;강익호;장명광
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1997.10a
    • /
    • pp.285-288
    • /
    • 1997
  • In this paper, the dynamics of actuators for generating the input of plants is considered in a design of the variable structure systems. While the input for plants is usually implemented by means of a certain actuator, the actuator dynamics is not incorporated in most of the VSS researches until now. The control algorithm of a VSS incorporating actuator dynamics is presented, and the simulation is given to show the usefulness of the algorithms.

  • PDF

Variable structure control of chaotic systems

  • Choi, Changkyu;Lee, Ju-Jang;Sugisaka, Masanori
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1994.10a
    • /
    • pp.505-510
    • /
    • 1994
  • To prevent the stable states from the complex dynamics, the global behavior of the overall system must be considered. Thus, indirect adaptive scheme might result in needless responses. Discrete-time variable structure controllers for a well-known logistic map are designed for two deferent sliding hyperplanes. Impulse disturbances are fully rejected by tile virtue of discrete-time variable structure control(DVSC). A numerical example is given to illustrate the effectless of the DVSC.

  • PDF

CNC milling experiments using a variable structure control (가변구조제어기를 사용한 CNC 공작기계의 절삭실험)

  • 김정호;은용순;조동일
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1996.10b
    • /
    • pp.852-855
    • /
    • 1996
  • A variable structure controller is developed for an AC servo motor used in CNC milling machines. The designed controller is implemented as an outer loop controller to a factory designed motor-servopack system. The robustness parameter is tuned for a fast response when the speed tracking error is large, while it is tuned for small oscillations when the speed tracking error is small. The designed controller is installed on a CNC machine using a PC. Cutting experiments show improved performance over the factory-designed controller.

  • PDF

Estimation of the Asymptotic Stability Region for the Uncertain Variable Structure Systems with Bounded Controllers (크기가 제한된 제어기를 갖는 가변구조제어 시스템의 점근 안정 영역 추정)

  • 최한호;국태용
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.9 no.8
    • /
    • pp.616-622
    • /
    • 2003
  • This paper deals with the problem of estimating the asymptotic stability region(ASR) of uncertain variable structure systems with bounded controllers. Using linear matrix inequalities(LMIs) we estimate the ASR and show the exponential stability of the closed-loop control system in the estimated ASR. We give a simple LMI-based algorithm to get estimates of the ASR. We also give a synthesis algorithm to design a switching surface which will make the estimated ASR big. Finally, we give numerical examples in order to show that our method can give better results than the previous ones for a certain class of uncertain variable structure systems with bounded controllers.

MIMO Variable Structure Control System with Sliding Sector (슬라이딩 섹터를 갖는 다중 입출력 가변 구조 제어 시스템)

  • Choi Han-Ho
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.12 no.6
    • /
    • pp.524-529
    • /
    • 2006
  • In this paper, we propose a method to design variable structure systems with sliding sector for multi-input multi-output systems with mismatched uncertainties in the state matrix. For the uncertain systems we define sliding sectors within which a norm of the state decreases with zero input despite of mismatched uncertainties. Using the notion of the sliding sector we give simple design algorithms of variable structure control laws that can reduce the chattering. Finally, we give a design example in order to show the effectiveness of our method.