• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.496-500
• /
• 2019

In this study, we investigate the effect of an Sb-deficiency on the thermoelectric properties of double-filled n-type skutterudite ($In_{0.05}Yb_{0.15}Co_4Sb_{12-x}$). Samples were prepared by encapsulated induction melting, consecutive long-time annealing, and finally spark plasma sintering processes. The Sb-deficient sample contained a $CoSb_2$ secondary phase. Both the double-filled n-type skutterudite pristine and Sb-deficient samples showed metallic behavior in electrical conductivity with increasing temperature. The carrier concentration of the Sb-deficient sample decreased compared with that of the pristine sample. Due to a decrease in carrier concentration, the Sb deficient sample showed decreased electrical conductivity and an increased Seebeck coefficient compared with the conductivity and coefficient of the pristine sample. Furthermore, the Sb deficient sample showed an increase in the power factor (${\sigma}{\cdot}S^2$); the power factor maximum shifted to athe lower temperature side than ones of the pristine sample. As a result, the Sb-deficient sample represents an improved average figure of merit (ZT) and a $ZT_{max}$ temperature lower than that of the pristine sample. Therefore, we propose that Sb-deficient double-filled n-type skutterudite thermoelectric material ($In_{0.05}Yb_{0.15}Co_4Sb_{12-x}$) be used in the 573~673 K temperature range.

• Clinical and Experimental Reproductive Medicine
• /
• v.45 no.3
• /
• pp.129-134
• /
• 2018

Objective: In frozen and thawed embryos, the zona pellucida (ZP) can be damaged due to hardening. Laser-assisted hatching (LAH) of embryos can increase the pregnancy rate. This study compared thinning and drilling of the ZP before frozen embryo transfer (FET). Methods: Patients were randomly allocated into two groups for LAH using thinning or drilling on day 2 after thawing. Twenty-five percent of the ZP circumference and 50% of the ZP thickness was removed in the thinning group, and a hole $40{\mu}m$ in diameter was made in the drilling group. Results: A total of 171 in vitro fertilization/intracytoplasmic sperm injection FET cycles, including 85 cycles with drilling LAH and 86 cycles with thinning LAH, were carried out. The thinning group had a similar ${\beta}$-human chorionic gonadotropin-positive rate (38.4% vs. 29.4%), implantation rate (16.5% vs. 14.4%), clinical pregnancy rate (36.0% vs. 25.9%), miscarriage rate (5.8% vs. 2.4%), ongoing pregnancy rate (30.2% vs. 23.5%), and multiple pregnancy rate (7.0% vs. 10.6%) to the drilling LAH group. There were no significant differences in pregnancy outcomes between subgroups defined based on age (older or younger than 35 years) or ZP thickness (greater or less than $17{\mu}m$) according to the LAH method. Conclusion: The present study demonstrated that partial ZP thinning or drilling resulted in similar outcomes in implantation and pregnancy rates using thawed embryos, irrespective of women's age or ZP thickness.

• Proceedings of the SCSK Conference
• /
• 1996.07a
• /
• pp.33-51
• /
• 1996

화장품의 변질요인은 크게 물리적 또는 화학적 변화에 의한 요인과 미생물오염으로 인한 각종 문제점으로 대별될 수 있다. 이 중에서 미생물 오염문제는 제품의 상품가치에 미치는 영향 뿐만 아니라 지속적인 사용에 의한 피부의 위생적 측면때문에 그 중요성에 대한 인식이 높아지고 있다. 따라서, 제품개발시는 화장품 처방중의 영양성분의 배합, pH, 유화형태, 방부제의 혼합, 분배계수 및 그 안정성을 고려하여야 함은 물론이고 처방중의 모든 원료의 각각에 대한 항균능 및 피부자극여부를 사전에 미리 조사하여 각 제품별로 적당한 방부체계를 선택하는 것은 매우 중요한일이다. 독성실험방법에 있어서 in vivo 실험에 대체할 수 있는 새로운 in vitro 실험방법 수립 즉, 동물실험을 하지 않고 in vitro 실험결과로부터 in vivo 결과를 예측할 수 있도록 새로운 in vitro 실험체계의 가능성을 실험하였다. 4종의 cell line중 transformed mouse fibroblast L929가 본 실험에서 사용하기에 배양상의 용이성과 안정성, 재현성의 관점에서 가장 알맞은 cell line이었다. transformed mouse fibroblast L929를 사용한 NR$_{50}$ assay와 Draize score간의 regression coefficient ${\gamma}$값은 0.91이었다. 혈청은 시험물질의 세포에 대한 민감성에 영향을 주었다. 따라서, modified serum-free method를 이용함으로써 regression coefficient가 증가된 즉, 상관성 및 재현성이 높은 결과를 얻을 수 있었다. 이러한 기술은 독성실험에 실험동물을 사용하지 않고 in vivo test에 대체 할 수 있고, 또한 화학물질에 대한 prescreening으로 이용할 수 있을 것으로 판단된다.원과 섭식장소, 수중생물의 경우는 특히 수온, 수량 영양원등이다.(중략). 본 연구의 접근방법으로는 ASRS의 개념적인 Reference Model을 수립하고 이 Reference Model에 대한 Formal Model로 DEVS(Discrete Event System Specification)을 이용하여 시스템을 Modeling하였다. 이의 Computer Simulation을 위하여 DEVS형식론 환경에서의 Simulation Language인 DEVSim ++ⓒ를 이용하여 시스템을 구현하였다.. 실형 결과로는 먼저 선형 상미분방정식의 예로 mass-damper-spring system, 비선형 상미분방정식의 예로는 van der Pol 방정식, 연립 상미분방정식의 예로는 mixing tank problem 등을 보였으며, 그의 공학에서 일어나는 여러 가지 문제들도 다루었다.화물에 대한 방어력이 증가되어 나타난 결과로 여겨지며, 또한 혈청중의 ALT, ALP 및 LDH활성을 유의성있게 감소시키므로서 감잎 phenolic compounds가 에탄올에 의한 간세포 손상에 대한 해독 및 보호작용이 있는 것으로 사료된다.반적으로 홍삼 제조시 내공의 발생은 제조공정에서 나타나는 경우가 많으며, 내백의 경우는 홍삼으로 가공되면서 발생하는 경우가 있고, 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을 받을 수 있기 때문에 앞으로 이에 대한 많은 연구가 이루어져야할 것으로 판단된다.태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성요 소를 지닌 병렬적 합성어([$[W1]_{XO-}$ $[W1]_{XO}$ ]

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2020

In this experiment, the Grateloupia elliptica (G. elliptica) was fermented using the fungus Aureobasidium pullulans (A. pullulans) and its extract was obtained from hot water and 70% ethanol solution. The extract was studied for their biological activities such as antioxidant effect, Collagenase and tyrosinase inhibition in comparison to the nonfermented exatract in same solvents. Antioxidative activity test using 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) showed that ethanol extract had higher antioxidant activity than water extract. Among all of the samples, the antioxidant activity of G. elliptica fermented ethanol extracts (GEFEE) was highest. Tyrosinase inhibitory activity of GEFEE was highest with 9.8% at the 1,000 ㎍/mL concentration. No inhibition of collagenase from G. elliptica water extract (GEWE) and G. elliptica fermented water extract (GEFWE) was observed, but G. elliptica ethanol extracts (GEEE) and GEFEE showed increased collagenase inhibition activity with increasing concentrations of them. Collagenase inhibitory activity of GEFEE was highest with 50.3% at the 1,000 ㎍/mL concentration. MTS cell proliferation assay was conducted with the GEWE, GEEE, GEFWE, GEFEE and cell viability was over 90% at the 10 ㎍/mL ~ 1000 ㎍/mL concentrations for all of the samples, which suggested that the extracts were noncytotoxic. In conclusion, fermented extracts of G. elliptica could be developed to bioactive functional material for cosmetics with antioxidant and wrinkle improvement effects.

• Journal of the Korean Magnetics Society
• /
• v.18 no.4
• /
• pp.147-153
• /
• 2008

It has been well-known that the Fe/GaAs heterostructure has a small lattice mismatch of 1.4% between Fe and GaAs, and the Fe layer is grown epitaxially on the the GaAs substrate. There are rich physics are observed in the GaAs/Fe interface, and the spininjection is actively studied due to its potential applications for spintronics devices. We fabricated Fe wedge layer in the thickness range $0{\sim}3.4$ nm on the GaAs(100) surface with 5-nm thick Au capping layer. The magnetic anisotropy of the Fe/GaAs system was investigated by employing Brillouin light scattering(BLS) measurements in this study. The spin wave excitation of Fe layer was studied as the function of intensity and the in-plane angle of external magnetic field, and thickness of Fe layer. Also these various dependences were analyzed with analytic expression of spin wave surface mode in order to determine the magnetic anisotropies. It has been found that the GaAs/Fe/Au system has additional uniaxial magnetic anisotropy, while the bulk Fe has biaxial anisotropy. The uniaxial anisotropy shows increasing dependency respected to decreasing thickness of Fe layer while biaxial anisotropy is reduced with Fe film thickness. This result allows the analysis that the uniaxial anisotropy is originated from interface between GaAs surface and Fe layer.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.118-123
• /
• 2009

Keratin contains regulatory molecules that can enhance neuronal cell activity. We fabricated keratin/ PLGA films using 0, 10, 20, and 50 wt% of keratin using solvent casting method. We measured the contact angle of each film and cell proliferation was assayed by counting the cells attached on the film. Adhered cell morphology was confirmed by scanning electron microscope. RT-PCR was conducted to evaluate the gene expression of NF, NSE, and S-100, the Schwann cell markers. The keratin content of 20 and 50 wt% provided higher wettability than PLGA. The 20 wt% keratin was better in cell adhesion and proliferation of SCs than other keratin/PLGA films. The phenotypic stability of SC was maintained with the keratin content of 10 and 20 wt%.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.403-408
• /
• 2008

Keratin is the major structural fibrous protein providing outer covering such as wool, hair, and nail. Keratin is useful as natural protein. We developed the keratin loaded poly(L-lactide-co-glycolide) (PLGA) scaffolds (keratin/PLGA) for the possibility of the application of the tissue engineering using bone marrow mesenchymal (BMSCs). Keratin/PLGA (contents 0%, 10%, 20% and 50% of PLGA weight) scaffolds were prepared by solvent casting/salt leaching method. We characterized porosity, wettability, and water uptake ability, DSC of keratin/PLGA scaffold. We seeded BMSCs isolated from the femurs of rat into the inner core of the hybrid scaffold. Celluar viability were assayed by 3- (4,5-dimethylthiazol-2-yl) -2,5-diphenyl-tetrazolium bromide (MTT) test. We confirmed that keratin/PLGA scaffold is hydrophilic by wettability, and water uptake ability measurement results. In MTT assay results, cell viability in scaffolds impregnated 10 and 20 wt% of keratin were higher than other scaffolds. In conclusion, we suggest that keratin/PLGA scaffold may be useful to tissue engineering using BMSCs.

• Journal of the Korean Society of Food Culture
• /
• v.36 no.4
• /
• pp.362-372
• /
• 2021

The present study was undertaken to investigate the quality characteristics of Korean Woori black pig (KWP) bellies and loins by different slaughter weight (SW) groups. The loin and belly samples collected from KWPs with different body weights (50, 75, 90, 105, and 120 kg) at 24 h post-mortem were used in the present investigation. The samples were analyzed for quality traits, fatty acid profiles, and volatile flavor compounds. Results showed that the fat content of the loin (8.64%) and belly samples (46.78%) was significantly higher in the 120 kg SW group compared to those of other SW groups (p<0.05). However, a lower protein content (12.20-12.67%) was found in the belly cuts of the heavier SW groups (105-120 kg) compared to those of the lighter SW groups (p<0.05). The lowest cooking loss (24.34%) was found in the loin cuts of the 120 kg SW group (p<0.05). Both the loin and belly cuts were observed to be redder in color with increasing SW (p<0.05). Higher oleic acid (C18:1, n9) and total monounsaturated fatty acid content and lower linolenic acid(C18:3, n3) and total polyunsaturated fatty acid content were observed in both cuts of the 120 kg SW group (p<0.05). Out of the flavor compounds identified, 11 and 17 compounds in the loin and belly, respectively, were associated with the SW. An increase in the SW resulted in increased concentrations of C18:1n9- and amino acid-derived flavor compounds. Overall, the meat samples of the heavier SW groups (120 kg) exhibited better quality and higher concentrations of volatile compounds associated with pleasant flavors. However, the meat of the 120 kg SW group also contained a much higher fat level (8.64 and 46.78% in the loin and belly, respectively) that may result in high trimming loss and hence a high rejection risk by consumers.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.4
• /
• pp.308-313
• /
• 2021

Objective: The purpose of this study was to investigate the effect of different kettlebell mass (30%, 40%, and 50% of the body mass) on kinematics and kinetic variables of kettlebell swing. Method: Total of 16 healthy male who had at least 1 year of kettlebell training experience were participated in this study (age: 31.69 ± 3.46 yrd., height: 173.38 ± 4.84 cm, body mass: 74.53 ± 6.45 kg). In this study, a 13-segments whole-body model (upper trunk, lower trunk, pelvis, both side of forearm, upperarm, thigh, and shank) was used and 26 reflective markers were attached to the body to identify the segments during the movement. A 3-dimensional motion analysis with 8 infrared cameras and 4 channeled EMG was performed to find the effect of kettlebell mass on its swing. To verify the kettlebell mass effect, a one-way ANOVA with a repeated measure was used and the statistical significance level was set at 𝛼=.05. Results: Firstly, in all lower extremity joints and thoracic vertebrae, a statistically significant change in angle was shown according to an increase in kettlebell mass during kettlebell swing (p<.05). Secondly, in both the up-swing and down-swing phases, the knee joint and ankle joint ROM showed a statistically significant increase as the kettlebell mass increased (p<.05) but no statistically significant difference was found in the hip joint and thoracic spine (p>.05). Lastly, the hamstrings muscle activity was statistically significantly increased as the kettlebell mass increased during up-swing phases (p<.05). Also, as the kettlebell mass increased in P4 of the down swing phase, the gluteus maximus showed a statistically significantly increased muscle activation, whereas the rectus femoris showed a statistically significantly decreased muscle activation (p <.05). Conclusion: As a result of this study, hip extension decreased and knee extension increased at 40% and 50% of body mass, and the spine also failed to maintain neutrality and increased flexion. Also, when kettlebell swings are performed with 50% of body mass, synergistic muscle dominance appears over 30% and 40% of body mass, which is judged to have a risk of potential injury. Therefore, it is thought that for beginners who start kettlebell exercise, swing practice should be performed with 30% of body mass. In addition, even in the case of experienced seniors, as the weight increases, the potential injury risk may increase, so it is thought that caution should be exercised when performing swings with 40% and 50% of body mass. In conclusion, it is thought that increasing the weight after sufficiently training with 30% of the weight of all subjects performing kettlebell swing is a way to maximize the exercise effect as well as prevent injury.