This study was evaluated influence of fluidity properties according to basalt fiber and high volume fly ash in the mortar level, as part of a basic study for development of fiber reinforced concrete using basalt fiber and high volume fly ash. In the first step, it was evaluated that fluidity properties of mortar according to replacement ratio 6 level of fly ash(10, 20, 30, 40, 50 and 60mass%) and fluidity properties of mortar according to content 5 levels of SP(1.3, 1.5, 1.7, 1.9 and 2.1%) and content 5 levels of VA(0.2, 0.4, 0.6, 0.8 and 1.0%) for dispersion of the basalt fiber, in the second step, it was evaluated that fluidity properties of mortar using High-volume fly ash (50mass%) on 3 levels of basalt fiber length (6, 20 and 30mm). Results of assessment, if after a fiber mixed, it showed that viscosity agent is more effective to improve the fluidity and fiber dispersion than superplasticizer, high volume fly ash (50%) applying the mixing, due to three properties of fly ash, showed that the improved fiber dispersibility and flow improvement.
본 논문에서는 인터넷을 통한 운전면허 학과시험 학습시스템을 설계한다. 문항반응이론에 의거하여 학습자 능력모수를 정확히 측정하고, 측정된 학습자의 능력에 따라 최적의 평가문제와 학습콘텐츠를 동적으로 제공함으로써, 짧은 시간에 효과적으로 합격에 도달할 수 있도록 하는 개인 맞춤형 이러닝 시스템을 제안한다. 본 학습시스템은 콘텐츠 데이터베이스에 저장된 개념 단위 오브젝트 형태의 운전면허 학과시험용 학습콘텐츠들과 문제은행 데이터베이스에 저장된 운전면허 학과시험용 평가문제들을 연계하여, 학습자의 문항반응에 따라 최적의 문항과 콘텐츠를 제공할 수 있도록 설계된다. 각 문항들은 난이도, 변별도, 추측도의 문항모수를 보유한다. 또한 사용자 프로파일 데이터베이스에는 학습자들의 상태정보, 운전면허 학과시험용 평가문제들에 대한 피험자들의 문항반응을 유지 관리하고, 피험자들의 문항반응을 기초로 학습자 능력모수를 저장한다. 이들 데이터베이스는 인터페이스 에이전트, 콘텐츠 문항선택 & 피드백 에이전트 및 오프라인 추정기로 구성된 동작구조에 의하여 온라인 혹은 오프라인 형태의 동적 맞춤형 학습방식을 제공하여 최적의 학습과정을 제공한다.
Effect on the bio-mass and nutrient yield of Lemna perpusilla Torry was studied at two nutrient loading frequencies. Six polythene sinks ($6{\times}2{\times}0.5m^{3}$ area) randomly allocated to two treatments having three sinks in each treatment. Each sink containing $6{\times}2{\times}0.35m^{3}$ water body, was changed either daily with 12.6 kg anaerobically fermented cattle manure (effluent) or with 76 kg efluent at six-day interval. Media Kjeldhal-N (40 vs. 36 mg/L; p>0.05) and $NH_3$-N (9 vs 7 mg/L; p<0.05) concentration were higher in daily charged sinks than those charged at six-day interval. However, temperature ($28.48{^{\circ}C}\;vs.\;28.60{^{\circ}C}$) and pH (6.82 vs. 6.84) were sinilar in both groups of sinks. Biomass (93 vs. $80g/m^{2}/d$) and crude protein (1.24 vs. $1.11g/m^{2}/d$) yield were non-significantly (p>0.05) higher in the daily charged than 6-d interval charged ponds. However, dry matter (4.52 vs. 4.15%), organic matter (83 vs. 84%), crude protein (31.4 va. 29.6%) and organic carbon (47 vs. 47%) content were similar in both daily and 6-d interval charged ponds. There were no apparent relationships between the crude protein content of Lemna and the media Kjeldhal-N or $NH_3$-N concentration apparently due to saturated level of nutrient (N in particular). It was concluded that with the level of effluent used for two treatments, nutrient-loading frequency had no significant effect on the biomass and protein yield of Lemna. Technique described here can be used for year-round duckweed production from fermented cattle manure for feeding poultry/fish in smallholder production system.
오토클레이브 (Autoclave) 성형 공정은 항공산업분야의 복합재 부품 제작에 있어서 매우 안정적이고 중요한 제조방법으로서 자리매김 해왔었지만 오토클레이브가 가진 많은 장점과 함께 단점 또는 제약 사항들을 보여주고 있다. 최근에는 이러한 한계를 극복하기 위하여 다양한 탈 오토클레이브 (OoA, Out-of-Autoclave) 공정들이 연구 개발되고 있는데, 본 연구에서는 탈 오토클레이브 공정 중 하나로서 많은 관심을 받고 있는 액상성형공정 (Liquid Composite Molding)을 사용하여 시편들을 제작하고 이를 오토클레이브 공정으로 제작된 시편과 실험적으로 비교평가하였다. 액상성형공정 중 DB (Double Bagging), CAPRI (Controlled Atmospheric Pressure Resin Infusion) 및 VAP (Vacuum Assisted Process) 공정을 사용하여 시편 제작을 수행하고 내부 기공 함유량, 두께, 유리전이온도, 층간전단강도 및 굽힘강도 시험 평가를 통하여 각 제작 공정에 따른 차이를 확인할 수 있었다. 전체적으로 오토클레이브 성형 시편이 우수한 두께 균일도, 낮은 기공 함유량 및 양호한 기계적 강도 특성을 보였으며, 액상성형공정 중에서는 CAPRI 성형 시편이 DB 및 VAP 성형 시편에 비하여 상대적으로 우수한 특성을 가짐을 확인하였다.
N. T. D., Huyen;J. Th. Schonewille;W. F. Pellikaan;N. X. Trach;W. H. Hendriks
Animal Bioscience
/
제37권3호
/
pp.481-491
/
2024
Objective: This study determined fermentation characteristics of commonly used feedstuffs, especially tropical roughages, for dairy cattle in Southeast Asia. This information is considered relevant in the context of the observed low milk fat content and milk production in Southeast Asia countries. Methods: A total of 29 feedstuffs commonly used for dairy cattle in Vietnam and Thailand were chemically analysed and subjected to an in vitro gas production (GP) test. For 72 h, GP was continuously recorded with fully automated equipment and methane (CH4) was measured at 0, 3, 6, 9, 12, 24, 30, 36, 48, 60, and 72 h of incubation. A triphasic, nonlinear, regression procedure was applied to analyse GP profiles while a monophasic model was used to obtain kinetics related to CH4 production. Results: King grass and VA06 showed a high asymptotic GP related to the soluble- and non-soluble fractions (i.e. A1 and A2, respectively) and had the highest acetate to propionate ratio in the incubation fluid. The proportion of CH4 produced (% of GP at 72 h) was found to be not different (p>0.05) between the various grasses. Among the selected preserved roughages (n = 6) and whole crops (n = 4), sorghum was found to produce the greatest amount of gas in combination with a relatively low CH4 production. Conclusion: Grasses belonging to the genus Pennisetum, and whole crop sorghum can be considered as suitable ingredients to formulate dairy rations to enhance milk fat content in Vietnam/Thailand.
본 연구는 전통적 연출 작업에서 벗어나 침묵으로서의 글쓰기를 행하는 프랑스 연출가 끌로드 레지(Claude Régy)의 '침묵의 미학'이 창조해내는 시적 연출을 이탈리아 철학자 조르조 아감벤(Giorgio Agmaben)의 '잠재성'의 개념을 통해 고찰하고자 한다. 끌로드 레지는 연극에서 "근본적으로 중요한 것은 말하고자 하는 바를 말하지 않는 것에 있다"고 설명한다. 그래서 끌로드 레지는 극도의 절제된 미니멀한 수단을 선택하면서 지나치게 느리고 과도하게 분절된 대사가 만들어내는 '침묵'의 무대를 그려내고자 한다. '차라리 ~하지 않는 것을 선호(prefer not to)'하는 바틀비를 통해 자신의 완벽한 잠재성의 주요한 모델로 삼는 아감벤은, 현실태의 '중지' 속에서 비로소 잠재성의 본질이 드러남을 주장한다. 아감벤의 철학에서처럼, 끌로드 레지의 연출 작업은 말과 행동의 '중지'로서 이 침묵은 '행동과 유사성의 모방을 드러내는 현실태로 환원되는 것이 아니라' 비로소 '보이지 않는 것(l'invisible)'이 보이게 되는 순간을 창조해낸다. 이렇듯 끌로드 레지의 연출에서 드러나는 말의 침묵, 어두운 조명과 함께 불분명한 빈 무대의 시각적 침묵은 아감벤에 의해 "비존재를 환대하는" "근본적인 수동성"으로서의 잠재성으로 설명된다. 이런 관점에서 본 연구는 '내용없는 예술가'들에 대한 비판적 관점을 제공하는 아감벤의 '잠재성' 개념과 함께, '느림'과 '침묵'의 미학으로 자신만의 독창적 연출 양식을 창조한 끌로드 레지의 연출 작품, 모리스 메테를링크(Maurice Maeterlinck)의 <내면 L'interieur>과 욘포세(Jon Fosse)의 <누가 올거야 Quelqu'un va venir>를 살펴보면서 동시대, 21세기 연극예술의 또 다른 방향성을 창출해내며 새로운 연출 양식의 지평을 확장시키고자 한다.
본 시험은 화이트클로버 California Ladino(대조품종), Seminole, Sonja, Milo, Rinendel, Alberta 및 Sona 7품종을 축산기술연구소 대관령지소(표고 800m)와 남원지소(표고 450m)에서 각각 난괴법 3반복으로 수행하였다. 화이트 클로버의 엽색은 대조품종 Ladino와 Seminole을 제외하고 모두 연녹색이었고 엽폭도 대형이었다. 내한성은 대조품종인 Ladino 보다 좋은 품종은 Seminole로서 85.2%였다. 화이트 클로버 품종의 건물수량은 대관령에서 대조품종 Ladino보다 많은 Milo와 Rinendel이 남원에서는 대조품종인 Ladino 품종이 우수하였다. 대관령에서 화이트클로버의 품종별 사료가치중 ADF 함량은 대관령과 남원에서 Ladino가 각각 24.3과 23.6%로 가장 낮았고 NDF 함량은 품종간에 큰 차이를 보이지는 않았지만 Sonja, Ladino 및 Rinendel이 낮은 편에 속하였다. 화이트클로버의 조단백질 함량은 대관령지역에서는 Seminole이 가장 높았으며 남원지역에서는 Rinendel이 가장 높았다. 화이트클로버의 조단백질 생산량을 보면 대관령지역에서는 Milo가 가장 높았고 남원지역에서는 Ladino가 가장 높았다. 이상으로 화이트클로버의 건물수량과 사료가치로 미루어 볼때 대관령지역에서는 Milo와 Rinendel이, 남원지역에서는 Ladino와 Seminole이 유망한 품종으로 여겨진다.
Most liquid crystal display modes, including the twisted nematic (TN) $mode^1$, the in-plane switching (IPS) $mode^2$, the fringe field switching (FFS) $mode^3$, and the vertically aligned (VA) $mode^4$ are based on either a horizontal or a vertical alignment. However, for some applications, such as no-bias-bend (NBB) pi cell or bistable bend-splay display, an intermediate pretilt angle is essential$^5$. NBB pi cells have been a focus of interest because of their fast response time; however, the reliable control of the intermediate pretilt angle of liquid crystals that is required for the fabrication of NBB pi cells is challenging. The controllable pre-tilt angle of liquid crystals was investigated using a blend of horizontal and vertical polyimide prepared by a rubbing method. Various pretilt angles in the range from 0^{\circ}$ to 90^{\circ}$ were achieved as a function of the vertical polyimide content. We observed uniform liquid crystal alignment on the rubbing-treated blended polyimide layer. A NBB pi cell with an intermediate pretilt angle of 47.8^{\circ}$ was manufactured. This cell had no initial bias voltage and a low threshold voltage, which indicates that it has low power consumption. In addition, the response time of the NBB pi cell was rapid.
KSII Transactions on Internet and Information Systems (TIIS)
/
제4권1호
/
pp.25-44
/
2010
With the increasing popularity of mobile devices, it has become necessary to protect private information and content in these devices. Face recognition has been favored over conventional passwords or security keys, because it can be easily implemented using a built-in camera, while providing user convenience. However, because mobile devices can be used both indoors and outdoors, there can be many illumination changes, which can reduce the accuracy of face recognition. Therefore, we propose a new face recognition method on a mobile device robust to illumination variations. This research makes the following four original contributions. First, we compared the performance of face recognition with illumination variations on mobile devices for several illumination normalization procedures suitable for mobile devices with low processing power. These include the Retinex filter, histogram equalization and histogram stretching. Second, we compared the performance for global and local methods of face recognition such as PCA (Principal Component Analysis), LNMF (Local Non-negative Matrix Factorization) and LBP (Local Binary Pattern) using an integer-based kernel suitable for mobile devices having low processing power. Third, the characteristics of each method according to the illumination va iations are analyzed. Fourth, we use two matching scores for several methods of illumination normalization, Retinex and histogram stretching, which show the best and $2^{nd}$ best performances, respectively. These are used as the inputs of an SVM (Support Vector Machine) classifier, which can increase the accuracy of face recognition. Experimental results with two databases (data collected by a mobile device and the AR database) showed that the accuracy of face recognition achieved by the proposed method was superior to that of other methods.
Ursolic acid (UA), a bioactive triterpene acid, has been known to increase collagen content in human skin in addition to other actions such as anti-inflammatory, skin-tumor prevention and anti-invasion. However, it is poorly soluble in water. Therefore, we firstly prepared microemulsion system with benzyl alcohol, ethanol and Cremophor EL, RH 40 and Brij 35 as surfactant in order to increase solubility of UA and then prepared microemulsion was dispersed in o/w cream base for the topical delivery of UA in an effort to improve anti-wrinkle effect. The pseudo-ternary phase diagrams were developed and various microemulsion formulations were prepared using benzyl alcohol as an oil, Cremophor EL, RH 40 and Brij 35 as a surfactant. The droplet size of microemulsions was characterized by dynamic light scattering. The accumulation of VA in the skin from topical cream was evaluated in vitro using hairless mouse skins. The mean droplet size was $26.8{\pm}6.6$ nm for microemulsions II with Cremophor EL. All UA creams showed pseudoplastic flow and hysterisis loop in their rheogram, depending on the type of materials added in topical creams. The in vitro accumulation data demonstrated the UA topical cream prepared with the combination of Poloxamer 407 and Xanthan gum as a copolymer showed higher accumulation percentage than those prepared with either Poloxamer 407 or Xanthan gum. These results suggest that UA topical cream using microemulsion systems may be promising for the topical delivery of UA.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.