• The Journal of the Korea Contents Association
• /
• v.21 no.6
• /
• pp.35-43
• /
• 2021

Citrus quality is generally determined by its sugar content and acidity. In particular, sugar content is a very important factor because it determines the taste of citrus. Currently, the most commonly used method of measuring citrus sugar content in farms is a portable juiced sugar meter and a non-destructive sugar meter. This method can be easily measured by individuals, but the accuracy of the sugar content is inferior to that of the citrus NongHyup official machine. In particular, there is an error difference of 0.5 Brix or more, which is still insufficient for use in the field. Therefore, in this paper, we propose an AI model that predicts the citrus sugar content of unmeasured days within the error range of 0.5 Brix or less based on the previously collected citrus sugar content and meteorological data (average temperature, humidity, rainfall, solar radiation, and average wind speed). In addition, it was confirmed that the prediction model proposed through performance evaluation had an mean absolute error of 0.1154 for Seongsan area and 0.1983 for the Hawon area in Jeju Island. Lastly, the proposed model supports an error difference of less than 0.5 Brix and is a technology that supports predictive measurement, so it is expected that its usability will be highly progressive.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.1
• /
• pp.55-63
• /
• 2021

The roughness of the road is an important factor directly connected to the ride comfort, and is an evaluation item for functional evaluation and pavement quality management of the road. In this study, data on the road surface were acquired using the latest 3D geospatial information construction technology of ground LiDAR, drone photogrammetry, and drone LiDAR, and the accuracy and roughness of each method were analyzed. As a result of the accuracy evaluation, the average accuracy of terrestrial LiDAR were 0.039m, 0.042m, 0.039m RMSE in X, Y, Z direction, and drone photogrammetry and drone LiDAR represent 0.072~0.076m, 0.060~0.068m RMSE, respectively. In addition, for the roughness analysis, the longitudinal and lateral slopes of the target section were extracted from the 3D geospatial information constructed by each method, and the design values were compared. As a result of roughness analysis, the ground LiDAR showed the same slope as the design value, and the drone photogrammetry and drone LiDAR showed a slight difference from the design value. Research is needed to improve the accuracy of drone photogrammetry and drone LiDAR in measurement fields such as road roughness analysis. If the usability through improved accuracy can be presented in the future, the time required for acquisition can be greatly reduced by utilizing drone photogrammetry and drone LiDAR, so it will be possible to improve related work efficiency.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.187-193
• /
• 2021

In February 2020, Gyeonggi-do paid the world's first Data Dividend to local residents of Gyeonggi Province who produced data using local currency. Currently, Data Dividend is being paid to consumers who have produced data, but this paper studied the expansion of Data Dividend qualifications according to the contribution to creating added value. First, it raised the question of whether it is right for the recipient of Data Dividend to have only the consumers who produced the data. Second, by analyzing the four elements of data valuation criteria that influenced the creation of added value identified the objects that influence the creation of added value. The 4 factors were divided into productivity, effectiveness, concreteness, and usability, and the objects corresponding to each factor were analyzed. Accordingly, it was determined whether platform workers contributed to the creation of added value. In conclusion, it was confirmed that not only consumers, who were the first data producers, but also platform workers who contributed to the concreteness of data valuation to create added value can qualify for Data Dividend. Since this paper focuses on the necessity of data allocation centered on platform workers among the objects, the validity of objects that influence added value other than platform workers are excluded.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.1-18
• /
• 2022

This study critically analyzed the user experience (UX) of mobile applications, focusing on the advertising platforms of mobile applications for culture and arts content. This study aims to examine the direction for growth of the related mobile applications and propose alternative approaches to improve usability. In this study, a mobile app named 'Moviepre' was selected, and a heuristic evaluation was performed for in-depth exploration. For the selected case, the UX Honeycomb model was reconstructed to analyze useful, usable, desirable, findable, accessible, and credible elements of the case. First, since the users' preference for the price factor did not show a significant correlation with the usefulness of the content and the interface, it is necessary to make sure that the mobile application has unique values to gain a competitive advantage in the market. Second, by adopting customer path stages for analysis, the result indicated that users continuously interact with the service from the first moment they are aware of the mobile application. Third, if the user feels uncomfortable, it is likely that these factors hinder the establishment of a long-term relationship between the users and the mobile application. Finally, brand identity should be clearly established, and brand image strategy needs to be developed to satisfy users' expectations that high-quality culture and arts content will be available through the mobile application.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.667-677
• /
• 2022

The purpose of this study is to analyze the structural relationship among the usefulness, ease of use, use intention, and learning utilization of smart learning devices recognized by college students. In order to achieve this, the following problems were addressed: first, how do college students' recognition of ease and usefulness of smart learning devices? second, how do college students' recognition of ease and learning utilization? third, what mediating effects od use of smart learning devices and learning utilization? As for the research method, a survey of 350 students who participated in smart learning was conducted to conduct a home review, confirmatory factor analysis, and bootsrapping for structural equation estimation and mediating analysis. As a result of the analysis on this, first, it was found that the usefulness and ease of smart learning devices recognized by college students had an effect on the intention of use. Second, it was found that the perception of the usefulness and ease of smart devices perceived by college students had an effect on the use of smart learning device learning. Third, it was found that the intention to use smart devices perceived by college students mediated the relationship between usefulness and learning utilization, and it was found that it mediated the relationship between ease and learning utilization. The implications are that instructors can recognize and utilize the intention of using smart learning devices properly by allowing college students to recognize the usefulness and ease of using smart learning devices in the classroom, thereby increasing the learning utilization of smart learning devices in class. In addition, efforts are needed to enable college students to recognize the usefulness of smart devices and to expand the use of learning.

• Journal of Service Research and Studies
• /
• v.12 no.2
• /
• pp.38-47
• /
• 2022

The user interface is a very important factor in application usability. The user interface of a typical application has a navigation system and the selection of the item takes place to move the movement. In this study, we would like to see if there are differences in user satisfaction depending on the location of the navigation and the number of items. The methods of in this study, a random group of 135 adult men and women who randomly selected four to six items as independent variables was conducted on the top, bottom, side, and three locations of navigation in a typical application. As a result, the navigation system rejected the null hypothesis of 0.000 and 0.008 respectively, with a significant probability of 0.05 or less than 0.000 and 0.008, respectively. It was also confirmed that the study theory of whether the interaction of navigation location and number of items creates a difference in satisfaction was significant with a significant probability of 0.016. In the post-analysis (Schefe), there were significant differences in the position of navigation, as each group was classified as a new group at the top <bottom <, and in the number of items, there were significant differences between the two groups of six <4 . Conclusion of this research, depending on the results of some significant differences in satisfaction with the location of the navigation and the number of items, it can be seen that the satisfaction of the interface increases when the navigation position is located at the bottom. However, follow-up research is needed on whether side-type navigation is suitable for different mobile sizes.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.1
• /
• pp.83-95
• /
• 2023

These days, bacterial detection methods have some limitations in sensitivity, specificity, and multiple detection. To overcome these, novel detection and identification method is necessary to be developed. Recently, NGS panel method has been suggested to screen, detect, and even identify specific foodborne pathogens in one reaction. In this study, new NGS panel primer sets were developed to target 13 specific virulence factor genes from five types of pathogenic Escherichia coli, Listeria monocytogenes, and Salmonella enterica serovar Typhimurium, respectively. Evaluation of the primer sets using singleplex PCR, crosscheck PCR and multiplex PCR revealed high specificity and selectivity without interference of primers or genomic DNAs. Subsequent NGS panel analysis with six artificially contaminated food samples using those primer sets showed that all target genes were multi-detected in one reaction at 10⁸-10⁵ CFU of target strains. However, a few false-positive results were shown at 10⁶-10⁵ CFU. To validate this NGS panel analysis, three sets of qPCR analyses were independently performed with the same contaminated food samples, showing the similar specificity and selectivity for detection and identification. While this NGS panel still has some issues for detection and identification of specific foodborne pathogens, it has much more advantages, especially multiple detection and identification in one reaction, and it could be improved by further optimized NGS panel primer sets and even by application of a new real-time NGS sequencing technology. Therefore, this study suggests the efficiency and usability of NGS panel for rapid determination of origin strain in various foodborne outbreaks in one reaction.

• Science of Emotion and Sensibility
• /
• v.25 no.4
• /
• pp.45-52
• /
• 2022

Recently, interest in and demand for sensors that recognize physical activity and their products are increasing. In particular, the development of wearable materials that are flexible, stretchable, and able to detect the user's biological signals is drawing attention. In this study, an experiment was conducted to improve the dip-coating efficiency of a single-walled carbon nanotube dispersion solution after fine holes were made in a hydrophobic material with a micro needle. In this study, dip-coating was performed with a material that was not penetrated, and comparative analysis was performed. The electrical conductivity of the sensor was measured when the sensor was stretched using a strain universal testing machine (Dacell Co. Ltd., Seoul, Korea) and a multimeter (Keysight Technologies, Santa Rosa, CA, USA) was used to measure resistance. It was found that the electrical conductivity of a sensor that was subjected to needling was at least 16 times better than that of a sensor that was not. In addition, the gauge factor was excellent, relative to the initial resistance of the sensor, so good performance as a sensor could be confirmed. Here, the dip-coating efficiency of hydrophobic materials, which have superior physical properties to hydrophilic materials but are not suitable due to their high surface tension, can be adopted to more effectively detect body movements and manufacture sensors with excellent durability and usability.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.7
• /
• pp.325-332
• /
• 2023

Currently, the world's population has already entered a super-aging era, and the rate is expected to increase rapidly to about 40% by 2050. However, the rapid development of automation technology and the online service sector, the main technologies of the Fourth Industrial Revolution, are still further isolating them in a world where many inconveniences and development technologies are applied. As such, alienation in daily life is widely expanded in various fields, but the financial service sector is one of the must-use areas regardless of age because of its strong nature in the public service sector, and is a very important factor in the period when branches are rapidly decreasing. However, the current utilization rate of mobile banking services is not around 5%, so users over 60 are rarely able to use them. The UX design of the most frequently used remittance service screen in mobile banking services was proposed, and the difficulty of trying to find the preferred bank among 56 or more banks was solved by analyzing the usage rate of each bank and dividing it into three stages by age group from 50 or older. In addition, it was designed to strengthen customized services by showing their recently used banks as the top priority. The design proposed in this study obtained an average of 4.8 points or more out of 5 points as a result of usability satisfaction through interviews with less than 50 senior groups. This study is believed to help each bank upgrade its different mobile banking designs in a unified manner.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.147-153
• /
• 2023

As it spreads to all industries of artificial intelligence technology, AIaaS equipped with artificial intelligence services is emerging. In particular, non-IT companies are suffering from the absence of software experts, difficulties in training big data models, and difficulties in collecting and analyzing various types of data. AIaaS makes it easier and more economical for users to build a system by providing various IT resources necessary for artificial intelligence software development as well as functions necessary for artificial intelligence software in the form of a service. Therefore, the supply and demand for such cloud-based AIaaS services will increase rapidly. However, the quality of services provided by AIaaS becomes an important factor in what is required as the supply and demand for AIaaS increases. However, research on a comprehensive and practical quality evaluation metric to measure this is currently insufficient. Therefore, in this paper, we develop and propose a usability, replacement, scalability, and publicity metric, which are the four metrics necessary for measuring reusability, based on implementation, convenience, efficiency, and accessibility, which are characteristics of AIaaS, for reusability evaluation among the service quality measurement factors of AIaaS. The proposed metrics can be used as a tool to predict how much services provided by AIaaS can be reused for potential users in the future.