• Bulletin of the Korean Mathematical Society
• /
• v.55 no.3
• /
• pp.735-747
• /
• 2018

This paper deals with the asymptotic behavior of solutions to the generalized MHD and Hall-MHD systems. Firstly, the upper bound for the generalized MHD and Hall-MHD systems is investigated in $L^2$ space. Then, the effect of the Hall term is analyzed. Finally, we optimize the upper bound of decay and obtain their algebraic lower bound for the generalized MHD system by using Fourier splitting method.

• Journal of Power System Engineering
• /
• v.4 no.3
• /
• pp.72-80
• /
• 2000

In order to design a stable robust controller, nominal model, and the upper bound about the uncertainty which is the error of the model are needed. The problem to estimate the nominal model of controlled system and the upper bound of uncertainty at the same time is called robust identification. When the nominal model of controlled system and the upper bound of uncertainty in relation to robust identification are given, the evaluation of the validity of the model and the upper bound makes it possible to distinguish whether there is a model which explains observation data including disturbance among the model set. This paper suggests a method to identity the uncertainty which removes disturbance and expounds observation data by giving a probable postulation and plural data set to disturbance. It also examines the suggested method through a numerical computation simulation and validates its effectiveness.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.2
• /
• pp.134-140
• /
• 2021

Objective: The purpose of this study was to investigate the alteration of upper cervical manipulation to autonomic nervous system (ANS) through the heart rate variability(HRV) analysis in young healthy individuals. Design: Two-group pretest-posttest design. Methods: Thirty four young healthy participants (17 males and 17 females) were randomized into the 2 groups, such as the upper cervical manipulation group (UCM group, n=17), neck stretching group (NS group, n=17). UCM group received a upper cervical manipulation, especially on the atlas, and NS group did stretch for both side of upper trapezius and levator scapular. For the UCM, Atlas mobility was checked by therapist and thrust was given once at the posterior arch of Atlas. HRV was measured before and after intervention to investigate ANS alteration. After the intervention, both groups were given 3 minutes break-time before measuring HRV. Results: The UCM group showed significant differences in ANS Activity, Stress Resistance, Stress index and Fatigue Index (p<0.05) while no differences in NS group with before and after intervention. There were significant differences in ANS Activity, Stress Resistance, and Fatigue Index between groups (p<0.05). Conclusions: This study suggected that upper cervical manipulationhas positive effects on the ANS activity, stress resistance, and fatigue index.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.960-967
• /
• 2008

This paper shows that design of a robustly stable repetitive control system is equivalent to that of a feedback control system for an uncertain linear time-invariant system satisfying the well-known robust performance condition. Once a feedback controller is designed to satisfy the robust performance condition, the feedback controller and the repetitive controller using the performance weighting function robustly stabilizes the repetitive control system. It is also shown that we can obtain a steady-state tracking error described in a simple form without time-delay element if the robust stability condition is satisfied for the repetitive control system. Moreover, using this result, a sufficient condition is provided, which ensures that the least upper bound of the steady-state tracking error generated by the repetitive control system is less than or equal to the least upper bound of the steady-state tracking error only by the feedback system.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.346-349
• /
• 1993

A method for image compression based on decomposition is presented. We design the efficient coding technique for upper band image signals. This coding technique with directive 1-D DPCM is based on the statistical properties of upper bands. Lower band image signals is encoded using 2-D DPCM. The directive 1-D DPCM is performed, scanning upper bands according to edge direction. And then the predicted error signals of upper band sis coded using B1 and Huffman code, and the predicted error signals of lower band is coded using Huffman code. The proposed system shows improved performance when compared with other existing methods with respect to peak signal to noise ratio(PSMR) and human visual system(HVS) properties.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.10 s.253
• /
• pp.1293-1297
• /
• 2006

In this paper, kinematic analysis of a double-action link-type die set for enclosed die forging is carried out. The structure of the die set and its operational principle during enclosed die forging are introduced in detail. A closed-form solution of the relative velocity of the middle plate with respect to the upper plate after the upper and lower dies are enclosed is given in terms of the link lengths and the distance from the lower pin to the upper pin of the link system. The effect of the link lengths on both strokes and velocities is investigated. It has been shown that the relative velocity of the middle plate with respect to the upper plate varies almost linearly with the stroke of the upper plate.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.34-43
• /
• 1994

The unequal symbol error probability of TCM(trellis coded modulation) is analyzed and applied to the derivation of bit error probability of /RS/Trellis concatenated coded-modulation system. An upper bound of the symbol error probability of TCM concatenated with RS code is obtained by exploiting the unequal symbol error probability of TCM, and it is applied to the derivation of the upper bound of the bit error probability of the RS/Trellis concatenated coded-modulation system. Our upper bounds of the concatenated codes are tighter than the earlier established other upper bounds.

• Journal of The Korean Radiological Technologist Association
• /
• v.28 no.1
• /
• pp.55-60
• /
• 2002

Purpose : The aim of this study is to rise interest in system control for digital image of high quality by investigating diagnostic value of Digital radiographic system in upper gastrointestinal study Materials and Method : Upper gastrointestinal study wa

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.464-473
• /
• 2018

The objective of this study is to develop a sizing system of fitness clothing that can properly accommodate various body sizes of Korean senior women. The sizing system of upper and lower fitness clothing was developed in the present study by selection of key variables, identification of size category candidates, and determination of an optimal sizing system. First, key anthropometric dimensions (stature and bust circumference for upper clothing and stature; waist circumference for lower clothing) were identified by factor analysis on the direct body measurements (n = 272) and 3D whole-body scan data (n = 271) of Korean senior women in Size Korea. Second, sizing system candidates based on the key dimensions of upper and lower clothing were explored using a grid method and an optimization method. Lastly, among the sizing system candidates, optimal sizing systems of upper and lower clothing were selected in terms of accommodation rate. Five size categories (short/small, short/medium, tall/small, tall/medium, and tall/large) were selected as the optimal sizing systems of upper and lower clothing with 89% and 78% of accommodation rate, respectively, for the Korean senior women. The anthropometric characteristics of the representative humans of the optimal size categories would be of use in the design of fitness compressive wear for the better fit and effectiveness of exercise and health of Korean senior women.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.122-129
• /
• 2005

Shoe with leather upper such as safety and golf shoe requires a roughing process where the upper is roughed fur helping outsole to be cemented well. It is an important and basic process for production of leather shoe but is not automated yet. Thus, there are problems that the defect rate is high and the quality of roughed surface is not uniform. In order to solve such problems, the interest in automation of roughing process is being increased and this paper introduces CAM system for 5-axis automatic roughing machine as one part of automation of roughing process. The CAM system developed interpolates a B-spline curve using points measured from the Roughing Path Measurement System. The B-spline curve is used to generate the tool path and orientation data fer a roughing tool which has not only stiffness but also flexibility to rough the inclined surface efficiently. For productivity, the upper of shoe is machined by side of the roughing tool and tool offset is applied to the roughing tool for machining of inclined surface. The generated NC code was applied to 5-axis polishing machine for the test. The upper of shoe was roughed well along the roughing path data from CAM and the roughed surface was proper fur cementing of the outsole.