Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Kinematic Analysis of a Double-Action Link-Type Die Set for the Enclosed Die Forging

폐쇄단조용 복동링크식 다이세트의 기구학적 해석

  • 박래훈 (경상대학교 대학원 기계공학과) ;
  • 전병윤 (경상대학교 대학원 기계공학과) ;
  • 이민철 (경상대학교 항공기부품기술연구소) ;
  • 전만수 (경상대학교 기계항공공학부 항공기부품기술연구소)
  • Published : 2006.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, kinematic analysis of a double-action link-type die set for enclosed die forging is carried out. The structure of the die set and its operational principle during enclosed die forging are introduced in detail. A closed-form solution of the relative velocity of the middle plate with respect to the upper plate after the upper and lower dies are enclosed is given in terms of the link lengths and the distance from the lower pin to the upper pin of the link system. The effect of the link lengths on both strokes and velocities is investigated. It has been shown that the relative velocity of the middle plate with respect to the upper plate varies almost linearly with the stroke of the upper plate.

Keywords

References

  1. Siegert, K., Kammerer, M., Keppler-Ott, Th., Ringhand, D., 1997, 'Recent Developments on High Precision Forging of Aluminum and Steel,' J. Mat. Proc. Tech., Vol. 71, pp. 91-99 https://doi.org/10.1016/S0924-0136(97)00153-2
  2. Yoshimura, H., Tanaka, K., 2000, 'Precision Forging of Aluminum and Steel,' J. Mat. Proc. Tech., Vol. 98, pp. 196-204 https://doi.org/10.1016/S0924-0136(99)00199-5
  3. Doege, E., Bohnsack, R., 2000, 'Closed Die Technologies for Hot Forging,' J. Mat. Proc_ Tech., Vol. 98, pp. 165-170 https://doi.org/10.1016/S0924-0136(99)00194-6
  4. Park, J. J., Lee, J. H., Lee, Y. S., 1996, 'FEM Analysis of Closed-Die Forging of a Bevel Gear,' KSME(A), Vol. 20, No.8, pp. 2458-2467
  5. Choi, J. C., Choi, Y., 1999, 'Precision Forging of Spur Gears with Inside Relief,' Int. J. Mach_ Tools Manufact., Vol. 42, pp. 1214-1222 https://doi.org/10.1016/S0890-6955(99)00015-2
  6. Mamalis, A. G., Manolakos, D. E., Baldoukas, A. K., 1996, 'Simulation of the Precision Forging of Bevel Gears Using Implicit and Explicit FE Techniques,' J. Mat. Proc. Tech., Vol. 57, pp. 164-171 https://doi.org/10.1016/0924-0136(95)02058-6
  7. Kondo, K., Ohga, K., 1995, 'Precision Cold Die Forging of a Ring Gear by Divided Flow Method,' Int. J. Mach. Tools Manufact., Vol. 35, pp. 1105-1113 https://doi.org/10.1016/0890-6955(95)90405-B
  8. Joun, M. S. et al., 2006, 'Development of an Double-Action Link-Type Die Set·for Enclosed Die Forging,' Technical Report, Gyeongsang National University
  9. Eom, J. G., Jun, B. Y., Joun, M. S., 2006, 'Static and Structural Analysis of the Link of a Double-Action Link-Type Hydraulic Die Set,' KSPE Spring Conference, pp. 93-94