• Journal of Technologic Dentistry
• /
• v.27 no.1
• /
• pp.105-113
• /
• 2005

The purpose of this study is to evaluate the effect of loading at three different occlusal surface position of the gold alloy crown on the stress distributions in surrounding bone, utilizing 3-dimensional finite element method. A three dimensional finite element model of an implant with simplified gold alloy crown and supporting bone was developed for this study. A oblique or vertical load of 100 N was applied at the following position at each FE model : 1) center of occlusal surface, 2) a point on the buccal side away from center of occlusal surface (COS) by 2.8mm, 3) a point on the lingual side away from COS by 2.8mm. In the results, Minimum von Mises stresses under vertical load or oblique load of 100N were about 6MPa at the center of occlusal surface and about 40MPa at the point on the buccal side, respectively. From the results we could come to the conclusion that occlusive loading position could be an important factor for establishment of structural safety of supporting bone.

• Journal of Mechanical Science and Technology
• /
• v.20 no.5
• /
• pp.602-611
• /
• 2006

This paper proposes a locomotion pattern and a control method for biped robots with curved soles. First, since the contact point of a supporting leg may arbitrarily move back and forth on the ground, we derived the desired trajectory from a model called the Moving. Inverted Pendulum Model (MIPM) where the Zero Moment Point (ZMP) exists at the supporting point and can be moved intentionally. Secondly, a biped robot with curved soles is an under-actuated system since the supporting point contacting with a point on the ground has no actuator during the single supporting phase. Therefore, this paper proposes a computed-torque control for this under-actuated system using decoupled dynamic equations. A series of computer simulations with a 7-DOF biped robot with curved soles shows that the proposed walking pattern and control method are effective and allow the biped robot to walk fast and stably, and move more like human beings. Also, it is shown that the curved sole shape has superior energy consumption compared to flat soles, and greater efficiency in ascending and descending the stairs.

• Research in Community and Public Health Nursing
• /
• v.32 no.4
• /
• pp.529-539
• /
• 2021

Purpose: The purpose of this study was to understand the parenting stress and health promotion behavior of working women, and to investigate the mediating effect of supporting resources. Supporting resources were set as social support of spouse and community, and institutional support of the organization to which the subject belongs based on previous studies and an ecological system theory. Methods: The participants were composed of 214 female workers residing in 17 cities and provinces nationwide and having at least one child aged 1~12 years old. Data were collected online from February 19 to February 28, 2021. The collected data were analyzed using the SPSS 20.0 program to understand the level and correlation of the general characteristics and major variables, and to test the mediating effect, after controlling the variables significantly from univariate analysis, step regression analysis was performed. Results: Among the supporting resources, the mediating effect of social support of spouse and community was statistically significant. Conclusion: These findings suggest that it is necessary to seek ways to increase the social support of working women's spouses and people around them in order to increase the health promotion behavior of working women.

• Geomechanics and Engineering
• /
• v.33 no.5
• /
• pp.507-518
• /
• 2023

The effects of various supporting arrangements have been investigated on an excavation support system using a numerical tool. The purpose of providing different supporting arrangements was to limit the pile wall deflection in the range of 0.5% to 1% of the excavation depth. Firstly, a deep excavation supported by sheet pile wall was modeled and the effects of sheet pile wall thickness, excavation depth and distance to adjacent footings from sheet pile wall face were explored on the soil deformation and wall deflection. Further analysis was performed considering six different arrangements of tieback anchors and struts in order to limit the wall deflections. Case-01 represents the basic excavation geometry supported by sheet pile wall only. In Case-02, sheet pile wall was supported by struts. Case-03 is a sheet pile wall supported by tieback anchors. Likewise, for the Cases 04, 05 and 06, different arrangements of struts and tieback anchors were used. Finally, the effects of different supporting arrangements on soil deformation, sheet pile wall deflection, bending moments and anchor forces have been presented.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.77-84
• /
• 2003

Deep excavations in the urban areas have been frequently going on in large scale. Soil-nailing and Earth-anchor supporting methods are generally used in deep excavation. These construction methods cause ground disturbances during drilling process, and damages of adjacent structures and ground due to the differential settlement throughout construction period, and unexpected behaviors of supporting system according to the characteristics of drilling machine and ground condition. This article introduces two actual examples of adjacent deep excavation for the construction of university buildings in granitic Seoul area. The important results of construction and measurements obtained using Crawler drilling machine for Soil-nailing and Earth-anchor supporting methods are summarized. And some suggestions are given to improve and develop the technique of design and construction in the deep excavation projects having similar ground condition and supporting method.

• Geomechanics and Engineering
• /
• v.5 no.4
• /
• pp.283-297
• /
• 2013

The aim of this paper is to investigate how the soil-structure interaction affects sloshing response of the elevated tanks. For this purpose, the elevated tanks with two different types of supporting systems which are built on six different soil profiles are analyzed for both embedded and surface foundation cases. Thus, considering these six different profiles described in well-known earthquake codes as supporting medium, a series of transient analysis have been performed to assess the effect of both fluid sloshing and soil-structure interaction (SSI). Fluid-Elevated Tank-Soil/Foundation systems are modeled with the finite element (FE) technique. In these models fluid-structure interaction is taken into account by implementing Lagrangian fluid FE approximation into the general purpose structural analysis computer code ANSYS. A 3-D FE model with viscous boundary is used in the analyses of elevated tanks-soil/foundation interaction. Formed models are analyzed for embedment and no embedment cases. Finally results from analyses showed that the soil-structure interaction and the structural properties of supporting system for the elevated tanks affected the sloshing response of the fluid inside the vessel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3371-3380
• /
• 2012

This paper finds the selecting evaluation index of technical development supporting business, applied to determine its validity. Measuring the new evaluation index for selection against the existing select evaluation index, it shows which index has accurately estimated the ranking of the companies with good performance. Using the BSC and AHP method, this study developed the select evaluation index of technology development supporting business.

• Fashion & Textile Research Journal
• /
• v.18 no.3
• /
• pp.272-281
• /
• 2016

From the year 2000 on, Seoul has aimed to be a fashion city, and thus has been supporting young designers through Seoul Fashion Creative Studio, Generation Next, Le Dome, Concept Korea, etc. London is famous for nurturing young designers through the joint help of government, schools and industries: Alexander McQueen, Christopher Kane and Peter Pilotto are successful cases. Therefore, this research aims to suggest a direction for policies aimed at helping young designers in the international market, on the basis of London's nurturing programs and ideas from a literature review and case studies. The results are below. Firstly, a step-by-step supporting program is recommended. Secondly, long-lasting, sustainable programs are considered essential to support designers after the end of their contracts. Thirdly, practical assistance is preferred to monetary funding in order to lighten the designers' lot and in the interests of transparency. The mentoring service should be strengthened for the designers to eventually become independent. The support should be tailor-made according to items. Fourthly, the supporting programs should be promoted. Fifthly, government and industries should collaborate. Sixthly, 'de minimis' against overlapped support should be legislated. For these, the change of supporting method can be helpful; an independent administrative organisation plans and collects funds from governments and companies. Through these programs and any subsequent studies, Seoul could become a fashion city where young designers play active roles at a global level.

• Journal of International Academy of Physical Therapy Research
• /
• v.6 no.1
• /
• pp.788-794
• /
• 2015

This study examines changes in walking ability among patients with stroke after applying dual-task training under the condition of visual control and unstable supporting ground; the purpose is to provide reference data for selecting intervention methods that enhance the walking ability of patients with stroke. Among the patients with stroke who received rehabilitation treatment(at Rehabilitation Hospital B in Gyeonggi, South Korea from May 2014 to July 2014), 29 patients were selected as research subjects; all of them understood the purpose and contents of this research and agreed to participate in the experiment. The research subjects were divided into a visual control and unstable supporting ground dual-task(VUDT) group(10 patients), a visual control dual-task(VDT) group(10 patients), and an unstable supporting ground dual-task(UDT) group(9 patients); all of the subjects received 30-minute trainings, three times a week for a total of four weeks. A Timed-Up-and-Go(TUG) test was performed to investigate the change of walking function among the subjects, and a 10m walking test was conducted to measure their walking speed. According to the study results, all three groups showed significant differences after dual-task training; the dual-task training group under the condition of visual control and unstable supporting ground showed the most prominent change. This study confirmed that dual-task training using visual control and unstable supporting ground has a positive impact on the walking ability of patients with stroke. Through the study results, we found that implementing dual-task training under the condition of visual control and unstable supporting ground can more effectively improve the walking ability of patients with stroke, rather than performing visual control dual-task training or unstable supporting ground dual-task training only.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.3
• /
• pp.465-471
• /
• 2008

Highly active, stable, and magnetically separable immobilized enzymes were developed using carboxymethyl cellulose (CMC) and diethylaminoethyl cellulose DEAE-C; hereafter designated "DEAE" as supporting materials. Iron oxide nanoparticles penetrated the micropores of the supporting materials, rendering them magnetically separable. Lipase (LP) was immobilized on the surface of the supporting materials by using cross-linked enzyme aggregation (CLEA) by glutaraldehyde. The activity of enzyme aggregates coated on DEAE was approximately 2 times higher than that of enzyme aggregates coated on CMC. This is explained by the fact that enzyme aggregates with amine residues are more efficient than those with carboxyl residues. After a 96-h enantioselective ibuprofen esterification reaction, 6% ibuprofen propyl ester was produced from the racemic mixture of ibuprofen by using DEAE-LP, and 2.8% using CMC-LP.