• Journal of Digital Convergence
• /
• v.10 no.2
• /
• pp.225-229
• /
• 2012

A reformer for a small fuel cell system is an apparatus which converts hydrocarbon fuel into hydrogen-rich gas. Among many indices of a reformer, the most crucial index of a reformer is CO concentration in the off-gas out of reformer which must be controled under 5ppm for the efficiency and performance of a system. This paper suggests the criteria of a reformer operation for the stability of a reformer in a fuel cell system by deducing crucial indices and improving processes. The six-sigma technique was applied to verify the optimum control and operation of a reformer of a fuel cell combined heat and power system. The result of temperature control of each parts of a reformer system is the concentration of CO which is the most important factor for the operation of a fuel cell system. The temperature of the parts of a reformer, MTS, LTS and Prox, were controled so that the concentration of CO.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.637-647
• /
• 2010

The Universal Soil Loss Equation (USLE)-based modeling systems have been widely used to simulate soil erosion studies. However the GIS-based USLE modeling systems have limitation in gully erosion evaluation which is one of the most important factor in soil erosion estimation. In this study, the integrated soil erosion evaluation system using with Sediment Assessment Tool for Effective Erosion Control (SATEEC) system, nLS and Unit Stream Power-based Erosion/Deposition (USPED) model was developed to simulate gully erosion. Gully head location using nLS model, USPED for gully erosion, and the SATEEC estimated sheet and rill erosion were evaluated and combined together with the integrated soil erosion evaluation system. This system was applied to the Haean-myeon watershed, annual average sediment-yield considering sheet, rill and gully erosion was simulated as 101,933 ton/year at the study watershed. if the integrated soil erosion evaluation system is calibrated and validated with the measured data, this system could be efficiently used in developing site-specific soil erosion best management system to reduce soil erosion and muddy water inflow into the receiving waterbody.

• Wind and Structures
• /
• v.20 no.6
• /
• pp.763-791
• /
• 2015

"Wind and Ports" is a European project that has been carried out since 2009 to handle wind forecast in port areas through an integrated system made up of an extensive in-situ wind monitoring network, the numerical simulation of wind fields, the statistical analysis of wind climate, and algorithms for medium-term (1-3 days) and short term (0.5-2 hours) wind forecasting. The in-situ wind monitoring network, currently made up of 22 ultrasonic anemometers, provides a unique opportunity for detecting high resolution thunderstorm records and studying their dominant characteristics relevant to wind engineering with special concern for wind actions on structures. In such a framework, the wind velocity of thunderstorms is firstly decomposed into the sum of a slowly-varying mean part plus a residual fluctuation dealt with as a non-stationary random process. The fluctuation, in turn, is expressed as the product of its slowly-varying standard deviation by a reduced turbulence component dealt with as a rapidly-varying stationary Gaussian random process with zero mean and unit standard deviation. The extraction of the mean part of the wind velocity is carried out through a moving average filter, and the effect of the moving average period on the statistical properties of the decomposed signals is evaluated. Among other aspects, special attention is given to the thunderstorm duration, the turbulence intensity, the power spectral density and the integral length scale. Some noteworthy wind velocity ratios that play a crucial role in the thunderstorm loading and response of structures are also analyzed.

• YAKHAK HOEJI
• /
• v.49 no.6
• /
• pp.449-458
• /
• 2005

There have been rapid changes in the pharmaceutical environment after the separation of Dispensing and Prescribing practice. In the early stage of this system, outpatients had few options to choose their pharmacies due to various obstacles. Under these circumstances, this study on the defection tendency of long-term care patients was performed through the analysis of outpatients who quit visiting a pharmacy nearby general hospital. PowerBuilder ver 9.0 program was used to extract significant data, and SPSS package was employed for statistic analysis. 3,308 outpatients who visited a pharmacy nearby hospital for a month (in January, 2004) were studied. Patients' sex, age and location of residence, the class of medical insurance, the characteristic type of medication (powder, split form, medication for external use/injection), waiting time, disease (department) were considered as variable factors. It turned out that the patient revisit ratio was 80.8$\%$ and the patient defection ratio was 32.4$\%$. As was expected, those factors mentioned above influenced on the revisit and defection ratio considerably. In terms of patient factors, it proved that there was no relationship among sex, location of residence, the class of medical insurance and revisit (defection) ratio. Only age factor influenced the ratio; the older, the higher revisit ratio and the less defection ratio. In respect of dispensing factors, there were obvious relationships among the factors and the ratio: bill (money they had to pay individually), waiting time, number of medications, splitting of tablets, unit price of drug and revisit (defection) ratio showed significant relationship. The result of this study revealed an aspect of outpatients' behavior and it could be used as a reference for better patient service and customer relationship management.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.2
• /
• pp.169-174
• /
• 2015

This paper addresses experimental methodologies to measure the temperature-dependent thermal conductivity of the insulation materials popularly used for LNG cargo containment systems. The measurement techniques considered in this paper are the guarded hot plate (GHP) method and heat flow method (HFM). The former is based on the power supplied to the hot plate to keep the temperature constant, and the latter is based on a direct heat flux measurement. In order to improve the accuracy of the HFM, the thermal conductivity obtained by GHP was cross-compared with the HFM results, and a calibration factor was derived. It was found that the thermal conductivities measured by the two methods corresponded well under room temperature, but the deviation tended to slightly increase as the temperature decreased. Because of the easy installation and operability of HFM, it can be used to measure thermal conductivity in a large scale mock-up test or unit insulation panel test, where the GHP method is difficult to apply.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1295-1296
• /
• 2007

A lot of researches about dye-sensitized solar cell (DSC) are recently being conducted. Because DSC has several advantages to pass the limits of silicon solar cells such as a low manufacturing expense, a simple manufacturing process and its transparency. But most researches on DSC are still conducted about the unit cell and laboratory-centered. That is, present researches on DSC are not practical. Therefore, researches about large area cells and modules have to be prerequisites for DSC to have the practicality. Characteristics of large area DSC are so different from those of small area DSC in aspect of fill factor and efficiency. In this study, we made an experiment on finding suitable size of DSC that has the most effective power according to the variation of active area. In detail, the experiment was conducted about the optimum ratio of length to width and we introduced the ratio of active area to non-active area to find the active area which has the best output. Because small DSC doesn‘t have the best output in comparison with total area of cell although the smaller DSC has the better efficiency. As a result, we achieved the optimum ratio of length to width of 8:3 and active area of $8cm^2$ as the optimum size for upscaling DSC.

• Journal of The Geomorphological Association of Korea
• /
• v.21 no.4
• /
• pp.85-96
• /
• 2014

A waterfall is a channel unit with steep bedrock. No strict criteria for height, water volume, gradient to define waterfalls exist in Korea. The goal of our study is to classify waterfalls based on morphological forms which are the outcomes of developmental processes. The genesis of waterfall depends upon erosional properties of waterfall. The height, gradient, bedrock strength and stream power of waterfalls are regarded as the main factors, by which waterfalls can be classified. We find out that the most important factor for the development of waterfalls is joint system. Development of joint system varies depending on bedrocks. Flow directions and erosional types are decided by the density and direction of joint system in the bedrock, which also decide the height and gradient of stream bed. Joint type decides the gradients of the bed, gradient and height of waterfalls, therefore, decides morphological forms.

• Journal of Information Technology Services
• /
• v.19 no.6
• /
• pp.177-189
• /
• 2020

The OECD has assessed Korea as the third highest in trade facilitation worldwide. The paperless trade of Korea is world class based on uTradeHub : national e-trade service's infrastructure for trade community. Over 800 trade-related document standards provide interoperability of message exchange and trade process automation among exporters, importers, banks, customs, airlines, shippers, forwarders and trade authorities. Most one-to-one unit processes are perfectly paperless & online; however, from the perspective of process flow, there is a lack of streamlining end-to-end trade processes spread over many different parties. This situation causes the trade community to endure repetitive-redundant load for handling trade documents. The trade community has a strong demand for seamless trade flow. For streamlining the trade process, processes with data should flow seamlessly to multilateral parties. Flowing data with an optimized process is the critical success factor to accomplish seamless trade. This study proposes four critical digital trade infrastructures as a platform service : (1) data-centric Intelligent Document Recognition(IDR), (2) data-driven Digital Document Flow (DDF), (3) platform based Digital Collaboration & Communication(DCC), and (4) new digital Trade Facilitation Index (dTFI) for precise assessment of K-Trade Digital Trade Framework. The results of new dTFI analyses showed that redundant reentry load was reduced significantly over the whole trade and logistics process. This study leads to the belief that if put into real-world application can provide huge economic gains by building a new global value chain of the K-trade eco network. A new digital trade framework will be invaluable in promoting national soft power for enhancing global competitiveness of the trade community. It could become the advanced reference model of next trade facilitation infrastructure for developing countries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8700-8706
• /
• 2015

The first driving device of the power bogies for the Korean high-speed railway vehicle consists of the traction motor (TM) and the motor reduction gears unit (MRU). Although TM and MRU are the mechanically integrated structures, their time between overhauls (TBO) have two separate intervals due to different technical requirements(i.e. TBO of MRU: $1.8{\times}10^6km$, TBO of TM: $2.5{\times}10^6km$). Therefore, to reduce the unnecessary number of preventive maintenances, it is important to evaluate the optimal TBO with a viewpoint of reliability-center maintenance towards cost-effective solution. In this study, derived from the field data in maintenance, fault tree analysis and failure rate of the subsystem considering criticality of the components are evaluated respectively. To minimize the conventional total maintenance cost, the same optimal TBO of the components is derived from genetic algorithm considering target reliability and improvement factor. In this algorithm, a chromosome which comprised of each individual is the minimum preventive maintenance interval. The fitness function of the individual in generation is acquired through the formulation using an inverse number of the total maintenance cost. Whereas the lowest common multiple method produces only a four percent reduction compared to what the existing method did, the optimal TBO of them using genetic algorithm is $2.25{\times}10^6$km, which is reduced to about 14% comparing the conventional method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.489-498
• /
• 2016

This study examined the effects of internal marketing and customer orientation on the organizational commitment of nurses in specialized hospitals. This research was conducted from May 1 to 30, 2015 and involved 149 nurses at 5 specialized hospitals in Busan, The collected data were analyzed by descriptive statistics, t-test, ANOVA, Scheffe's test, Pearson correlation coefficients, stepwise multiple regression by the SPSS WIN 18.0 program. As a result, there were significant differences in the organizational commitment according to age, marital status, education, clinical experience, position, work shift, working unit, number of beds, and experience of participation for employee satisfaction survey. Organizational commitment was positively related to the internal marketing. In addition, there was a positive correlation between the organizational commitment and customer orientation. Meaningful variables that influenced the organizational commitment were internal marketing, working unit, education, and position. The total explanation power was 58.5% and the internal marketing was the most influential factor. In conclusion, to enhance the organizational commitment of nurses working in specialized hospitals, educational opportunities need to be provided to increase the professionalism of nurses, and efforts will be needed to improve the working environment and develop internal marketing strategies, such as regular satisfaction surveys.