• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.306-309
• /
• 1995

This paper describes the dielectric characteristics of $SF_{6}$ gas in a non-uniform electric field under overvoltages. The breakdown voltage-time characteristics and the breakdown voltage-gas pressure characteristics are measured within a gas pressure range extending from 0.1 to 0.5 [Mpa] for the plane electrode system with a needle-shaped protrusion. The curvature radius of the needle protrusion is 0.5[mm]. Also, the growth process of the predischarge are simultaneously observed. As a result, it is found that the breakdown mechanism and predischarge phenomena are closely associated with the polarity and waveforms of the testing voltage.

• 한국전자파학회논문지
• /
• 제28권12호
• /
• pp.1003-1006
• /
• 2017

본 논문에서는 실드 박스를 이용하여 다수의 휴대 단말기의 무선 성능을 시험할 경우, 발생하는 실드 박스 내 전기장 불균일 현상을 시뮬레이션을 통해 분석하였고, 전기장 균일도를 개선하기 위해서 두 가지 방법을 제시하였다. 제시한 방법들이 단말기 사이의 전기장 균일도를 크게 개선할 수 있음을 확인하였다.

• 대한화학회지
• /
• 제6권2호
• /
• pp.104-107
• /
• 1962

It is thought that the adsorption isotherms in dyeing of cellulose by the direct cotton dyes are consisted of combined type of Langmuir and Freundlich as the opinion of Fujino, et al;$[D]_F=ab[D]_S/(1+b[D]_S)+k[D]_S$where a,b,k; constants, $[D]_F$; dye adsorption on the fiber, $[D]_S$; dye concentration in the bath. This means that the dyes adsorbed in cellulose present in the state of partly mono molecular and partly aggregate; the characteristic fading order curve will be expressed as the combined system of uniform particle size distribution and assumed that the slope of the theoretical models of Baxter, et al., and assumed that the slope of curve will be changed near the point of a, the saturation value of Langmuir isotherms in the above equation. Firstly, the theoretical fading rate curve was treated with small colour difference as the one step of experimental of above consideration.

• The Plant Pathology Journal
• /
• 제29권4호
• /
• pp.451-453
• /
• 2013

Common root rot caused by Cochliobolus sativus is a serious disease of barley. A simple and reliable method for assessing this disease would enhance our capacity in identifying resistance sources and developing resistant barley cultivars. In searching for such a method, a conidial suspension of C. sativus was dropped onto sterilized elongated subcrown internodes and incubated in sandwich filter paper using polyethylene transparent envelopes. Initial disease symptoms were easily detected after 48h of inoculation. Highly significant correlation coefficients were found in each experiment (A, B and C) between sandwich filter paper and seedling assays, indicating that this testing procedure was reliable. The method presented facilitates a rapid pre-selection under uniform conditions which is of importance from a breeder's point of view.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.362-366
• /
• 1990

The resistance spot welding process has been extensively used for joining of sheet metals, which are subject to variation of many process variables. Many qualitative analyses of sampled process variables have been successfully attempted to achieve a uniform nugget size. In this paper, the electrode movement signal which is a good indicative of the nugget size was examined by introducing a mathematical model with four parameters. A neural network method was applied for the estimation of the nugget size by four parameters. The prediction by the neural network is in good agreement with the actual nugget size. The results are quite promising in that the qualitative estimation of the invisible nugget size can be achieved without destructive testing of the welds.

• Journal of Forest and Environmental Science
• /
• 제25권1호
• /
• pp.75-84
• /
• 2009

This study was conducted to investigate the physical properties of wood chip for fuel processing with woody biomass. Seven species are selected and processed for testing physical properties by 3-type wood chippers which are commonly used in Korea. Wood chips produced by self-propelled drum chipper and fixed type wood chipper equipped with separator were uniform in size and shape. It was shown that the bulk density of produced wood chips was decreased with increasing the wood chip layer thickness, and oak chips prepared by self-propelled drum chipper and fixed type wood chipper showed the highest bulk density.

• 응용통계연구
• /
• 제16권1호
• /
• pp.141-150
• /
• 2003

본 논문은 베이즈인자(Bayes factor)를 이용하여 정상(stationary) AR(1)모형의 자기회귀계수에 대해 다중검정하는 방법을 제시한다. 모수들에 대한 사전분포로는 무정보 사전분포(noninformative prior distribution)를 가정한다. 이러한 경우에 통상적으로 사용되는 베이즈인자를 근사없이 정확히 계산하여 각 모형에 대한 사후확률(posterior probability)을 얻는다. 최종적으로 모의실험 자료 및 실제 자료에 적용하여 이론의 결과가 잘 부합되는지를 검토한다.

• 품질경영학회지
• /
• 제20권2호
• /
• pp.11-20
• /
• 1992

We discuss the feed back control of the on-line QC in the Taguchi method. Taguchi(1982) used the assumptions that the quality characteristics follow an uniform distribution and the Brownian motion to draw the loss function and proposed ${\Delta}/3$ or ${\Delta}$ for the initial control limit. Adams and Woodall(1989) also proposed a different procedure but using the same loss function. We propose, in this paper the new loss function under the assumption of mainly Brownian motion and compare the results with the results of the above.

• Journal of Genetic Medicine
• /
• 제15권1호
• /
• pp.1-7
• /
• 2018

Sonographic findings with little or no pathological significance, known as soft markers, are often found in aneuploidy fetuses. After normal screening for the aneuploidy in first trimester, there are no uniform recommendations regarding when to disregard or put on clinical significance in isolated soft markers. Associations between some soft markers and adverse pregnancy outcomes including intrauterine fetal death, preterm birth, fetal growth restriction, and congenital infection have been reported in euploidy fetuses. The present article aims to review recent literatures about the clinical significance of soft markers after normal first trimester combined screening or noninvasive prenatal testing, and propose a simple clinical summary for management of specific soft markers in pregnancies.

• Structural Engineering and Mechanics
• /
• 제19권6호
• /
• pp.603-618
• /
• 2005

The split Hopkinson pressure bar (SHPB) technique is widely used to characterize the dynamic mechanical response of engineering materials at high strain rates. In this paper, attendant problems associated with testing 70 mm diameter concrete specimens are considered, analysed and resolved. An adaptation of a conventional solid circular striker bar, as a means of achieving reliable and repeatable SHPB tests, is then proposed. In the analysis, a pseudo one-dimensional model is used to analyse wave propagation in a non-uniform striker bar. The stress history of the incident wave is then obtained by using the finite difference method. Comparison was made between incident waves determined from the simplified model, finite element solution and experimental data. The results show that the simplified method is adequate for designing striker bar shapes to overcome difficulties commonly encountered in SHPB tests. Using two specifically designed striker bars, tests were conducted on 70 mm diameter steel fibre reinforced concrete specimens. The results are presented in the paper.