• International Journal of CAD/CAM
• /
• 제5권1호
• /
• pp.29-38
• /
• 2005

A non-uniform 3-point ternary interpolatory subdivision scheme with variable subdivision weights is introduced. Its support is computed. The $C^0$ and $C^1$ convergence analysis are presented. To elevate its controllability, a modified edition is proposed. For every initial control point on the initial control polygon a shape weight is introduced. These weights can be used to control the shape of the corresponding subdivision curve easily and purposefully. The role of the initial shape weight is analyzed theoretically. The application of the presented schemes in designing smooth interpolatory curves and surfaces is discussed. In contrast to most conventional interpolatory subdivision scheme, the presented subdivision schemes have better locality. They can be used to generate $C^0$ or $C^1$ interpolatory subdivision curves or surfaces and control their shapes wholly or locally.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.265-270
• /
• 2001

This study presents a feedback control methodology for suppression of the vortex shedding from a circular cylinder in a uniform flow. A rotational oscillation is applied as a controlled forcing and the lift coefficient ($C_L$) is used as a feedback signal. A feedback control concept is made based on the phase relation between the rotation velocity and $C_L$ at 'lock-on', The phase between the forcing and the vortex formation is changed $180^{\circ}$ from the phase of enhancing the lock-on state. This concept is examined by solving the Van del Pol equation. The results are satisfactory.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.696-701
• /
• 2004

A vehicle cruise control algorithm using an Interacting Multiple Model (IMM)-based Multi-Target Tracking (MTT) method has been presented in this paper. The vehicle cruise control algorithm consists of three parts; track estimator using IMM-Probabilistic Data Association Filter (PDAF), a primary target vehicle determination algorithm and a single-target adaptive cruise control algorithm. Three motion models; uniform motion, lane-change motion and acceleration motion, have been adopted to distinguish large lateral motions from longitudinal motions. The models have been validated using simulated and experimental data. The improvement in the state estimation performance when using three models is verified in target tracking simulations. The performance and safety benefits of a multi-model-based MTT-ACC system is investigated via simulations using real driving radar sensor data. These simulations show system response that is more realistic and reflective of actual human driving behavior.

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.44-49
• /
• 1999

This paper is concerned with the theoretical and experimental study on the force conrtrol of a miniature robotic gripper. The gripper is an uniform flexible cantilever equipped with a distributed set of compact force sensor. As an actuator piezoelectric acturator, piezoelectric acturator is fixed with cupper plate at which the beam is clamped. The mathematical model of the assembled electro-mechaincal system is developed. The force sensor is described by a set of concentrated mass-spring system. The formulated equations of motion are applied to he study of a control problem where the gripper is commanded to grip an object The usefulness of the PID control technique is verified by experiment.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.275-280
• /
• 2004

Shape optimization was performed to obtain the precise shape of cutouts including the internal shape of cutouts in laminated composite plates by three dimensional modeling using solid element. The volume control of the growth-strain method was implemented and the distributed parameter chosen as Tsai-Hill fracture index for shape optimization. The volume control of the growth-strain method makes Tsai-Hill failure index at each element uniform in laminated composites under the initial volume. Then shapes optimized by Tsai-Hill failure index were compared with those of the initial shapes for the various load conditions and cutouts. The following conclusions were obtained in this study. (1) It was found that growth-strain method was applied efficiently to shape optimization of three dimensional cutouts in a laminate composite, (2) The optimal shapes of the various load conditions and cutouts were obtained, (3) The maximum Tsal-Hill failure index was reduced up to 67% when shape optimization was peformed under the initial volume by volume control of growth-strain method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1028-1033
• /
• 2005

Robot is composed of various devices but, those are incompatible with each other and hardly developing reusable control software. We suggest standard abstract interface for robot software component to make portable device and reusable control software of robot. This assures uniform abstracted interface to the device driver software like sensor and actuator and, control program can be transparent operation over device. We can develop devices and control software separately and independently with this idea. This makes it possible to replace existing devices with new devices which have a improved performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1408-1409
• /
• 2011

Carbon nanotubes (CNTs) were grown on conical tip substrates by using various methods such as electrophoretic deposition, dip-coating, and spray. The scanning electron microscope measurement showed that the spray method ascertained the most uniform deposition of CNTs. The CNT-emitter that was fabricated by the spray method revealed the lowest turn on voltage of electron emission and the highest emission current. In addition, the spray-produced CNT emitter showed the most stable long-term emission characteristics.

• 한국정보통신학회논문지
• /
• 제5권3호
• /
• pp.581-590
• /
• 2001

본 연구는 광 전송 시스템에 레이저 다이오드의 안정되고 고정된 출력 파장의 광원을 제공하기 위한 것이다. 레이저 다이오드를 구동하기 위하여 안정된 정전류 회로를 설계하려 했으며, 레이저 다이오드 자체의 온도센서와 TEC(Thermo Electric Cooler)를 이용하여 레이저 다이오드 내부의 온도를 제어하는 온도 제어 회로를 구성하였다. 또한 광 출력에 Wavelength Locker글 이용하였다. 최종적으로 이들을 제어하기 위하여 A/D, D/A 컨버터와 마이크로 프로세서를 사용하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.653-662
• /
• 1989

Cerebellar Model Arithmetic Controller (CMAC) has been introduced as an adaptive control function generator. CMAC computes control functions referring to a distributed memory table storing functional values rather than by solving equations analytically or numerically. CMAC has a unique mapping structure as a coarse coding and supervisory delta-rule learning property. In this paper, learning aspects and a convergence of the CMAC were investigated. The efficient training algorithms were developed to overcome the limitations caused by the conventional maximum error correction training and to eliminate the accumulated learning error caused by a sequential node training. A nonlinear function generator and a motion generator for a two d.o.f. manipulator were simulated. The efficiency of the various learning algorithms was demonstrated through the cpu time used and the convergence of the rms and maximum errors accumulated during a learning process. A generalization property and a learning effect due to the various gains were simulated. A uniform quantizing method was applied to cope with various ranges of input variables efficiently.

• 한국작물학회지
• /
• 제23권3호
• /
• pp.5-11
• /
• 1978

Since 1970, herbicides have been widely used in the crop production, especially in paddy field in Korea. In 1978, both preemergence and postemergence type herbicides are applied in the approximately 70% of total paddy field and 15% of upland to control weeds. Most herbicides control annual weeds effectively, but perennials have been problems in the paddy field. Under upland conditions, effectiveness of herbicides varies depending on many environmental conditions (soil moisture, soil physical properties, temperature, etc.) as well as uniform application of appropriate amounts of herbicides. In Korea, many research works have been concentrated on the screening of new herbicides in terms of herbicide effectiveness and yield or phytotoxicity of crops, and especially on the paddy field. However, physiological aspects of herbicidal action in plant and interaction of herbicides with the environments have not been studied approximately. Therefore, researches on the uptake of herbicides and the influence of herbicides on the physiological phenomena such as photosynthesis, respiration, nutrient uptake etc., to control troublesome perennial weeds in the paddy field are needed in future. Also some researches are needed to improve effectiveness of herbicirdes under upland conditions.