• International Journal of Control, Automation, and Systems
• /
• v.3 no.spc2
• /
• pp.315-321
• /
• 2005

Interactions among multiple control functions of a UPFC installed in a power system have been observed in power system simulation and been reported in authors' previous publications [1,2]. This paper presents new analytical results about these observed interactions and concludes that they are due to the control conflict between the series and shunt part of the UPFC, which are connected through the internal common capacitor inside the UPFC. Investigation in the paper reveals, for the first time as far as the authors are aware of, that the linkage pattern of UPFC series and shunt part decides whether the control functions implemented by the UPFC series and shunt part conflict each other or not. This linkage pattern of UPFC series and shunt part can be described by the flow of active power through the UPFC at steady-state operation of the power system. Hence in order to predict the possible interactions among multiple control functions of the UPFC, an interaction indicator is proposed in the paper which is the direction and amount of active power flow through the internal link of the UPFC series and shunt part at steady-state operation of the power system. This proposed interaction indicator can be calculated from power system load flow solution without having to run simulation of the power system with UPFC controllers installed. By using the indicator, the interactions among multiple control functions of the UPFC caused by badly set controller's parameters are excluded. Therefore the indicator only identifies the possible existence of inherent control conflict of the UPFC.

• The Journal of Information Technology
• /
• v.7 no.2
• /
• pp.29-42
• /
• 2004

The growth in EC will continue, irrespective of the medium or the type of environments established by organizations. Global electronic trade has been increasingly spreading all over the world due to the rapid development of internet and IT. For expanding the use of electronic trade, electronic payment based on electronic trade payment system is essential. The importance of trust is based on the potential use of the technology to increase information sharing. Last, it is necessary that the payment and performance guarantee function are added to unified global authentication system. As for now, Indentrus system is the most appropriate model for it. Thus, the purpose of this study is to present on the international trade trust for improvement to Electronic Commerce.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.388-394
• /
• 2019

This paper describes a design of security system-on-chip (SoC) that integrates a Cortex-M0 CPU with an AAW (ARIA-AES- Whirlpool) crypto-core which implements two block cipher algorithms of ARIA and AES and a hash function Whirlpool into an unified hardware architecture. The AAW crypto-core was implemented in a small area through hardware sharing based on algorithmic characteristics of ARIA, AES and Whirlpool, and it supports key sizes of 128-bit and 256-bit. The designed security SoC was implemented on FPGA device and verified by hardware-software co-operation. The AAW crypto-core occupied 5,911 slices, and the AHB_Slave including the AAW crypto-core was implemented with 6,366 slices. The maximum clock frequency of the AHB_Slave was estimated at 36 MHz, the estimated throughputs of the ARIA-128 and the AES-128 was 83 Mbps and 78 Mbps respectively, and the throughput of the Whirlpool hash function of 512-bit block was 156 Mbps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.223-228
• /
• 2019

Recently, the United States has been trying to strengthen its cybersecurity by upgrading its position as an Unified Combatant Command that focuses on the Cyber Command in the United States, strengthening operations in cyberspace, and actively responding to cyber threats. Other major powers are also working to strengthen cyber capabilities, and they are working to strengthen their organization and power. The world demands economic power for its own interests rather than its own borders. But Cyber World is a world without borders and no defense. Therefore, a cyber weapon system is necessary for superiority in cyberspace (defense, attack) for national cybersecurity. In this paper, we analyze operational procedures for cyber weapons operation. And we design cyber weapons to analyze and develop the best cyber weapons to lead victory in cyberwarfare. It also conducts cyber weapons research to solve the confrontation between Cyber World.

• Journal of Practical Engineering Education
• /
• v.15 no.3
• /
• pp.739-750
• /
• 2023

Several preceding studies have been conducted to integrate the education programs and qualification examination systems in higher education institutions, such as four-year engineering colleges and vocational universities. However, in practice, the implementation of such integration is a rare occurrence. The most ideal method of integrating education and qualifications can be seen as the unified operation of educational programs and qualification assessments. However, various elements required for accreditation of educational institutions and qualification systems must precede this. In this paper, we first compare and analyze the currently implemented competency-based qualification system and the Accreditation for engineering education evaluation operating as a quality management system for educational programs. Subsequently, through a case study of University K, which concurrently operates the Accreditation for engineering education and competency-based qualification systems, we examine the potential linkage between education and qualifications. After reviewing the case that education and qualifications can be linked, and reflecting the analysis results, if a program that has obtained the Accreditation for engineering education operates a curriculum that satisfies the criteria for Course-based Qualification System. We propose Accreditation-based Qualification System that can grant qualifications, students who have completed it will be provided.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.1
• /
• pp.3-11
• /
• 2020

In large public construction projects with a certain size or larger that need to be carried out over a number of years, the Authority must secure a budget for construction project management activities by the construction manager. There is no problem if the project management budget secured by the issuing Authority and the project management budget executed by the issuing Authority are the same, but if not, various problems will arise. Therefore, in this study, the following measures were proposed to improve the system for efficient operation of construction project management: First, the construction project management terms and tasks specified in the statutes and the guidelines of government agencies should be unified and the standard for calculating consideration should be unified. Second, the total project cost management guideline should be specified so that the missing construction project manager can receive compensation for the technical proposal. Third, if the project cost is changed in the long-term continuous construction project, the construction project management expense should be adjusted accordingly. Fourth, if construction project management service is required from the Authority, the basis for consignment to a specialized institution should be specified in the total project cost management guideline.

• Journal of Environmental Health Sciences
• /
• v.40 no.5
• /
• pp.331-345
• /
• 2014

Objectives: The exponential growth of chemicals, an area of high concern in developed countries like the US (i.e., the Gore Initiative) and in the EU (i.e., REACH), as well as recent chemical accidents in Korea, have provoked nationwide concerns and resultant legal enforcement. This study aims to compare the laws of the Ministry of Environment (the Chemical Substances Control Act (CSCA), Act on the Registration and Evaluation, etc. of Chemical Substances (ARECS)) with those of the Ministry of the Employment and Labor (Occupational Safety and Health Act (OSHA)). Methods: Each law pertaining to the Ministry of Environment and the Ministry of the Employment and Labor was downloaded from the official legal information system (www.law.go.kr). The objectives of each law and the major contents related to chemical management were compared and summarized. Results: The CSCA and the ARECS are focused on the protection of people and the environment, while the OSHA relates to the protection of workers. The right to know of people and workers has been reinforced. The former two laws emphasize prevention, but the OSHA contains both preventive and post-accident measures. The role of the Ministry of Employment was reinforced with the promulgation of the CSCA and ARECS, which contain regulations such as adjacent area impact evaluation, risk control planning, chemical statistical survey and construction and operation of information, provision of risk control plans, response to chemical accidents and registration of chemical substances. Conclusion: We found that the three laws discussed here have several similar clauses designed to protect people and the environment from risks that may be caused by the use of chemicals, even though there are some differences among them in terms of objectives and contents. This review concluded that several clauses that can be regarded as double regulation should be unified in order to minimize the waste of government administrative resources and socio-economic losses.

• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.374-382
• /
• 2020

Purpose: Recently, structural defects in old safety management facilities have led to the collapse of buildings and facilities. The purpose of this study is to develop guidelines for the installation of regular monitoring systems that determine the optimal sensor location for monitoring exhibition space building sensors equipped with visual elements in order to analyze the risk signs of exhibition space buildings and develop measurement technology. Method: The components, installation locations, alarm criteria, and management measures of the instrument are presented. Result: A measure was proposed to determine the location of sensors, secure signal processing technology for analysis by having unified visual perception, and configure optimal 'risk sign detection' based on sensor monitoring through test-bed operation. Conclusion: The results of this study can be prepared against the disasters that may arise from the collapse of exhibition buildings, and contribute to strengthening safety management capabilities.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.219-232
• /
• 2020

The result of efforts for the revitalization of traditional market have not been satisfied. The purpose of this study was to suggest implications on planning and design method for revitalization of the traditional market in Korean cities. For that, theoretical review and case analysis were conducted on public spaces in 'Quincy Market' and 'Granville Island Public Market'. The results of case analysis are as follows. (1) The various spaces and facilities that make up the traditional market show a synergistic effect through linkage. (2) Various public spaces for traditional market users have been made in market buildings and open spaces. (3) Food and beverages sold in traditional markets can be eaten in public spaces, and meetings, breaks, performances and events are held in public spaces. (4) A company or non-profit organization with unified executive power is in charge of or participating in market operation.

• Journal of the Korean School Mathematics Society
• /
• v.25 no.3
• /
• pp.261-278
• /
• 2022

The purpose of this study is to develop an assessment to diagnose difficulties in learning mathematics and misconstructions that elementary students have. With thorough theoretical background and analysis of mathematics curriculum documents, we established learning trajectories for the following content areas in grades 3 to 6: number and operation, regularity, data and chance, geometry, and measurement. Then, the research team created the assessment items targeting a specific stage in the learning trajectories and including item options to identify possible misconceptions. Based on the unified validity theory, we reported the detailed procedure of the assessment development and the evidence for the content, substance, and structural validity of the assessment. We collected the data of 675 elementary students. Rasch measurement modeling was applied, and Cronbach's alpha was estimated. We considered how to report students' assessment results to teachers appropriately and immediately, which suggested important implications for supporting teaching and learning mathematics in elementary schools. We also suggested how to use the assessment developed in this study in online and distance learning environments due to the COVID-19 pandemic.