• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.59-64
• /
• 2011

Explosion limit and flash point are the major combustion properties used to determine the fire and explosion hazards of the flammable substances. In this study, in order to predict upper explosion limits(UELs), the upper flash point of n-alkanes and aromatic compounds were measured under the VLE(vapor-liquid equilibrium) state by using Setaflash closed cup tester(ASTM D3278). The UELs calculated by Antoine equation and chemical stoichiometric coefficient tusing the experimental upper flash point were compared with the several reported UELs. From the given results, using the proposed experimental and predicted method, it is possible to research the upper explosion limits of the other flammable substances.

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.1 s.3
• /
• pp.1-7
• /
• 2002

• Journal of the Korean Institute of Gas
• /
• v.26 no.5
• /
• pp.35-40
• /
• 2022

PCVD (Plasma Chemical Vapor Deposition), a solar cell manufacturing facility, is a facility that deposits plasma generated in a chamber (NH₃, SIH₄, O₂ on a wafer. In the PCVD facility, gas movement and injection is performed in the gas cabinet, and there are many leak points inside because MFC, regulator, valve, pipe, etc. are intricately connected. In order to prevent explosion in case of leakage of NH₃ with an upper explosive limit (UEL) of 33.6% and a lower explosive limit (LEL) of 15%, the dilution capacity must be capable of allowing the concentration of NH₃ to be out of the explosive range. This study was analyzed using the CFD analysis technique, which can confirm the dilution ability in 3D and numerical values when NH₃ gas leaks from the existing PCVD gas cabinet. As a result, it was concluded that it corresponds to medium dilution and that testicular ventilation is possible through facility improvement.

• Journal of Korean Medical classics
• /
• v.24 no.6
• /
• pp.145-167
• /
• 2011

"Soayakjeungjikgyeol(小兒藥證直訣)" written by Jeon Uel(錢乙, 1032-1113) in the Song dynasty, is the most old and well know specialty publication of pediatrics in Easter Traditional Medicine. "Soayakjeungjikgyeol(小兒藥證直訣)" made a big influence not only on the development of pediatrics in later traditional medicine through the explanations of physiological and pathological knowledge and experiences, but also on application of many effective prescriptions which have been used in many clinics until now days. One of the most important meaning which "Soayakjeungjikgyeol(小兒藥證直訣)" has, is that it emphasized on the diagnosis and treatment using the theory of five organs(五臟辨證), and applied it to clinical medicine effectively. In othe words, through application of the theory of five organs in "Hwangjenargyeong(黃帝內經)" to practical field, Jeon Uel(錢乙) played role of a ring connecting with studies of herbal medicine in the school of Yeoksu(易水), and the development of the theory of five organs of the four prominent doctors(金元四大家) in the Jin(金) and Yuan(元) dynasty. In this article, also it is investigated that how the theory of interaction among five phases(五行), can be applied to treatment of pediatrics through analysis of related texts in "Soayakjeungjikgyeol(小兒藥證直訣)". This studies would be useful to understanding the history and properties of the theory of five organs.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.23-29
• /
• 2018

The fire and explosion properties necessary for waste, safe storage, transport, process design and operation of handling flammable substances are lower explosion limits(LEL), upper explosion limits(UEL), flash point, AIT( minimum autoignition temperature or spontaneous ignition temperature), fire point etc., An accurate knowledge of the combustion properties is important in developing appropriate prevention and control measures fire and explosion protection in chemical plants. In order to know the accuracy of data in MSDSs(material safety data sheets), the flash point of phenol was measured by Setaflash, Pensky-Martens, Tag, and Cleveland testers. And the AIT of phenol was measured by ASTM 659E apparatus. The explosion limits of phenol was investigated in the reference data. The flash point of phenol by using Setaflash and Pensky-Martens closed-cup testers were experimented at $75^{\circ}C$ and $81^{\circ}C$, respectively. The flash points of phenol by Tag and Cleveland open cup testers were experimented at $82^{\circ}C$ and $89^{\circ}C$, respectively. The AIT of phenol was experimented at $589^{\circ}C$. The LEL and UEL calculated by using Setaflash lower and upper flash point value were calculated as 1.36vol% and 8.67vol%, respectively. By using the relationship between the spontaneous ignition temperature and the ignition delay time proposed, it is possible to predict the ignition delay time at different temperatures in the handling process of phenol.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.401-407
• /
• 2014

In this paper, the effect of cohesive laws on the finite element analysis of crack propagation using cohesive elements is investigated through three-point bending and double cantilever beam problems. The cohesive elements are implemented into ABAQUS/Standard user subroutines(UEL), and the shape of cohesive law is varied by changing parameters in polynomial functions of cohesive traction-separation relations. In particular, crack propagation behaviors are studied by comparing load-displacement curves of the analysis models which have different shapes of cohesive laws with the same values of fracture energy and cohesive strength. Furthermore, the influence of the element size on crack propagation is discussed in this study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.6
• /
• pp.519-525
• /
• 2009

In this study a cohesive zone model was used to simulate the delamination phenomena which occurs by a successive crack initiation and propagation in composite laminates. The cohesive zone model was incorporated to the classical finite element method via cohesive element formulation and then implemented into the user-subroutine UEL of a commercial finite element program Abaqus. To validate the formulation and implementation of the cohesive element the finite element results were compared with the experimental data of double cantilever beam and end notched flexure tests. The numerical results well agree with the experimental load-displacement curves. Also the effect of the elastic stiffness and the size of the cohesive element on the global load-displacement curves were studied numerically. To minimize the mesh-dependency of the crack propagation path and eliminate the zig-zag patterns in the load-displacement curve, cohesive elements should be refined at the crack-tip.

• Korean Journal of Head & Neck Oncology
• /
• v.9 no.1
• /
• pp.42-48
• /
• 1993

A group of 49 patients with neurogenic tumor in head and neck except intracranial tumor & Von-recklinghausen's disease was treated at the Department of Surgery. Presbyterian Medical Center during 12 years from January, 1980 to December, 1991. Of the 49 cases, 24 cases were neurilemmoma, 23 cases neurofibroma and 2 cases malignant schwannoma. The lateral cervical region was the commonest location of the neurogenic tumors, 24 cases (49%) arose from posterior triangle of neck and 12 cases from anterior triangle of neck. The origin of nerve was identified in 28 cases(57%). Cervical plexus(10 cases) and brachial plexus(7 cases) were most commonly affected. The most common site of neurogenic tumors arose from cranial nerve was anterior cervical triangle.

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.1 s.3
• /
• pp.75-84
• /
• 2002

In this study, the 'force density method' for shape finding of cable net structures is presented. This concept is based on the force-length ratios or force densities which are defined for each branch of the net structures. This method renders a simple linear 'analytical form finding' possible. If the free choice of the force densities is restricted by further condition, the linear method is extended to a nonlinear one. The nonlinear one can be applied to the detailed computation of networks. In this paper, the general inverse matrix is introduced to solve the nonlinear equilibrium equation including Jacobian matrix which is rectangular matrix. Several examples for linear and nonlinear analysis applied additional constraints are presented. It is shown that the force density method is suitable for form finding of cable net and the general inverse matrix can be applied to solve the nonlinear equation without Lagrangian factors.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.168-171
• /
• 2010

본 논문에서는 GaN HEMT 소자를 이용한 고출력 고효율 특성을 가지는 광대역 SSPA의 개발을 다루고 있다. 개발한 SSPA는 8W 급과 15W 급의 GaN HEMT 소자를 사용하여 Pre-Drive 증폭단을 구성하였으며, Drive 증폭단은 50W/150W급 GaN HEMT 소자를 직/병렬구조로 사용하였다. Main 증폭단은 4-way 분배기와 결합기를 이용한 Balanced Structure를 적용하여 높은 출력을 구현하였으며, 안정적인 동작을 위하여 음(-)전원 제어 회로와 출력신호 검출 회로를 포함하고 있다. 제작된 SSPA의 사용가능 대역은 2.9GHz~3.3GHz로 단일전원을 사용하고 있으며 100us 펄스 폭, 10% Duty Cycle 조건에서 60dB의 전압이득, 1kW 출력과 약 28% 효율 특성을 가지는 것으로 측정되었다. 본 논문에서 개발한 SSPA는 S-대역을 사용하는 레이더시스템의 송신단에 적용될 수 있다.