• 전기학회논문지
• /
• 제65권7호
• /
• pp.1270-1276
• /
• 2016

This paper proposes the controller design for regulation control of two-link robot arm using sum of squares (SOS) control method that takes into account the input constraint. The existing studies of two link robotic arm system used a linear model of all the non-linearity of the system is linearized. For a linear controller, since the model of the system is simplified, it is possible to design a controller in consideration of constraints on the disturbance. However, there is a limit to the performance using a linearized model for a system with a complex nonlinear properties. To compensate for this in the case of using a fuzzy LMI method, it is necessary to have a large number of linear models and thus there is a disadvantage that the system becomes complicated. To solve these problems, we represents a two-link robot arm system with a polynomial model using a Taylor series expansion and design the controller considering the case where the magnitude of the control input is limited using SOS method. We demonstrate by simulations the feasibility of the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.523-527
• /
• 1991

A rubber pneumatic controlled actuator is a new actuator. It is very light With a high power-to-weight ratio. In this thesis, a control method for a two link robot arm using the rubber actuator is developed. The structure of the servo control is made up of two sections. The position control is performed by PID feedback control. The air pressure is controlled by Servo Valve Unit driven by PWM and the control input is compensated by software operation. The numerical simulation of this control method to two link robot arm is presented to verify the performance of the closed loop system. The actual control of the real two link robot arm with rubber actuator is taken and its results are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.8-13
• /
• 1993

This paper presents deterministic and adaptive control laws for two-link flexible arm. The flexible arm has considerable structural flexibility. Because of its flexbility, dynamic equations are very complex and difficult to get, dynamic equations for two-link flexible arm are derived from Bernoulli-Euler beam theory and Lagrangian equation. Using the fact that matrix is skew symmetric, controllers which have a simplified structure with less computational burden are proposed by using Lyapunov stability theory.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.206-212
• /
• 2000

This paper presents a hybrid actuator scheme to actively control the end-point position and vibration of a two-link flexible robot arm. Control scheme consists of four different actuators; two servo-motors at the hubs and two piezoceramics bonded to the surfaces of the flexible links. Two sliding hyperplanes are designed for two servo-motors which have time varying parameters to maintain control performance in any configuration. The surface gradients of the hyperplanes are determined by pole assignment technique to guarantee the stability on the hyperplanes themselves. During the motion, undesirable oscillations caused by the torques based on the rigid link dynamics are actively suppressed by applying feedback control voltages to the piezoceramic actuators. Consequently, desired tip motion is achieved. In order to demonstrate the effectiveness of the proposed methodology, experiments are performed for the regulating and tracking control problems.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.216-223
• /
• 2000

A robot arm with free joints has some advantages over conventional ones. A light weight and low power consumed arm can be made by a reduction of the number of joint actuators. And this arm can easily overcomes actuator failure due to unexpected accident. In general such underactuated arm does not have controllability because of the lack of joint actuators. The two-link arm with a free joint introduced in this paper is also uncontrollable in the sense of linear system theory. However, the linearized system sometimes can not represent the inherent dynamic behavior of the nonlinear system. In this paper the dynamic characteristics of the two-link arm with a free joint in view of global motion including damping and friction effect of the joints is investigated. In the case of considering only the damping effect, the controllable goal positions are confined to a specific trajectories. But in the case of considering the friction effect, the system can be controlled to arbitrary positions using the friction of the free joint as a holding brake. Also numerical example of position control is presented.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1139-1144
• /
• 2012

산업용 로봇의 하중률은 1대 10에서 1대 30이고, 3대 1의 하중률을 가지는 인간과 비교하여 매우 낮다. 다음 세대 로봇의 목표 중에 하나는 하중률이 될 것이고, 이것은 가벼운 로봇을 개발함으로 가능할 것이다. 2관절 유연한 로봇팔은 관절 축을 회전할 때 진동이 발생한다. 본 논문에서는 유연한 로봇팔의 진동 동력학은 오일러 베르누이의 보 이론과 라그랑지 방정식을 이용하여 구하였고, $\dot{D}-2C$가 skew symmetric이다는 사실을 사용하여, 계산량을 줄이는 리아프노프 안정도 이론을 이용한 단순한 구조의 새로운 제어기를 제안한다. 2링크 유연한 로봇에 대한 확정적인 적응제어 법칙을 제안하고, 시뮬레이션을 통하여 그 타당성을 보인다.

• 한국전자통신학회논문지
• /
• 제4권3호
• /
• pp.236-242
• /
• 2009

2관절 유연한 로봇 팔는 관절 축을 회전할 때 진동이 발생한다. 본 논문에서는 유연한 로봇팔의 진동 동력학은 bernoulli-Euler의 beam이론과 라그란지 방정식을 이용하여 구하였고, $\dot{D}$-2C가 skew symmetric이다는 사실을 사용하여 계산량을 줄이는 단순한 구조의 새로운 제어기를 제안한다. Lyapunov 안정도 이론은 관절을 조절하기 위한 안정한 확정적인 비선형 제어기를 성취하기 위하여 적용된다.

• 전자공학회논문지T
• /
• 제36T권3호
• /
• pp.64-71
• /
• 1999

본 논문에서는 DD(Direct-drive)의 기구로서 2자유도 평행링크 기구를 사용하였다. 평행링크 기구는 2개의 모터가 각각 기저부에 설치되어 있기 때문에 모터 자체의 질량이 다른 모터에 부하가 되지 않고, 링크의 수는 증가하지만 arm의 질량이 가볍게 되어, 링크 파라미터의 설정에 의하여 원심력 등의 비선형력이 없어지며 동시에 모터사이의 비간섭화를 실현할 수 있다. 그리고 평행링크 DD로븟 매니퓰레이터의 고정도 운전의 실현을 위하여 신경회로망을 이용한 학습제어계를 설계하여 학습속도의 개선과 함께 변화한 작업대상에의 적응력을 개선하기 위하여 신경회로망과 피드백제어기로 학습제어 알고리즘을 구성한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.59.4-59
• /
• 2001

In this paper, wireless interface of the motion between human and robot is implemented. The idea is that if a human who is equiped with device including accelerometer and rate-gyro sensor move his/her arm, then the robot follows human motion. The robot is designed as wheeled type mobile robot with two link arms. The robot´s basic movements such as forward, backward, left, right movement can be controlled from foot sensor which human steps on. Arm movements can be controlled by arm motion of human motion. In order to detect human motion, sensor data analysis from gyro and accelerometer has to be done. Data from sensors are transferred through wireless communication to activate the robot.

• 전자공학회논문지B
• /
• 제29B권1호
• /
• pp.58-66
• /
• 1992

This paper proposes a neuro-controller for position control of one-link flexible robot arm. Basically the controller consists of a multi-layer neural network and a conventional PD controller. Two controller are parallelly connected. Neural network is traind by the conventional error back propagation learning rules. During learning period, the weights of neural network are adjusted to minimize the position error between the desired hub angle and the actual one. Finally the effectiveness of the proposed approach will be demonstrated by computer simulation.