• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.8-13
• /
• 1993

This paper presents deterministic and adaptive control laws for two-link flexible arm. The flexible arm has considerable structural flexibility. Because of its flexbility, dynamic equations are very complex and difficult to get, dynamic equations for two-link flexible arm are derived from Bernoulli-Euler beam theory and Lagrangian equation. Using the fact that matrix is skew symmetric, controllers which have a simplified structure with less computational burden are proposed by using Lyapunov stability theory.

• 한국전자통신학회논문지
• /
• 제4권3호
• /
• pp.236-242
• /
• 2009

2관절 유연한 로봇 팔는 관절 축을 회전할 때 진동이 발생한다. 본 논문에서는 유연한 로봇팔의 진동 동력학은 bernoulli-Euler의 beam이론과 라그란지 방정식을 이용하여 구하였고, $\dot{D}$-2C가 skew symmetric이다는 사실을 사용하여 계산량을 줄이는 단순한 구조의 새로운 제어기를 제안한다. Lyapunov 안정도 이론은 관절을 조절하기 위한 안정한 확정적인 비선형 제어기를 성취하기 위하여 적용된다.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1139-1144
• /
• 2012

산업용 로봇의 하중률은 1대 10에서 1대 30이고, 3대 1의 하중률을 가지는 인간과 비교하여 매우 낮다. 다음 세대 로봇의 목표 중에 하나는 하중률이 될 것이고, 이것은 가벼운 로봇을 개발함으로 가능할 것이다. 2관절 유연한 로봇팔은 관절 축을 회전할 때 진동이 발생한다. 본 논문에서는 유연한 로봇팔의 진동 동력학은 오일러 베르누이의 보 이론과 라그랑지 방정식을 이용하여 구하였고, $\dot{D}-2C$가 skew symmetric이다는 사실을 사용하여, 계산량을 줄이는 리아프노프 안정도 이론을 이용한 단순한 구조의 새로운 제어기를 제안한다. 2링크 유연한 로봇에 대한 확정적인 적응제어 법칙을 제안하고, 시뮬레이션을 통하여 그 타당성을 보인다.

• Smart Structures and Systems
• /
• 제7권2호
• /
• pp.103-116
• /
• 2011

This paper is concerned with the trajectory tracking and vibration suppression of a single-link flexible arm by using piezoelectric materials. The dynamics of a single flexible arm with PZT patches as sensor and actuator is derived using extended Hamilton's principle. Resulting equations show that the coupled beam dynamics including beam vibration and its rigid in-plane rotation takes place in two different time scales. By using singular perturbation theory, the system dynamics is divided into two subsystems. Then, a composite control scheme is elaborated that makes the orientation of the arm track a desired trajectory while suppressing its vibration. The proposed controller has two parts: one is a tracking controller designed for the slow (rigid) subsystem, and the other one is a stabilizing controller for the fast (flexible) subsystem. The outputs considered for the system are angular position of the hub and voltage of the sensor mounted on the structure. To avoid requiring further measurements of beam vibration and also angular velocity of the hub for the fast and slow control laws, respectively, two sliding mode observers for estimating the unknown states are also designed.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.206-212
• /
• 2000

This paper presents a hybrid actuator scheme to actively control the end-point position and vibration of a two-link flexible robot arm. Control scheme consists of four different actuators; two servo-motors at the hubs and two piezoceramics bonded to the surfaces of the flexible links. Two sliding hyperplanes are designed for two servo-motors which have time varying parameters to maintain control performance in any configuration. The surface gradients of the hyperplanes are determined by pole assignment technique to guarantee the stability on the hyperplanes themselves. During the motion, undesirable oscillations caused by the torques based on the rigid link dynamics are actively suppressed by applying feedback control voltages to the piezoceramic actuators. Consequently, desired tip motion is achieved. In order to demonstrate the effectiveness of the proposed methodology, experiments are performed for the regulating and tracking control problems.

• 전자공학회논문지B
• /
• 제29B권1호
• /
• pp.58-66
• /
• 1992

This paper proposes a neuro-controller for position control of one-link flexible robot arm. Basically the controller consists of a multi-layer neural network and a conventional PD controller. Two controller are parallelly connected. Neural network is traind by the conventional error back propagation learning rules. During learning period, the weights of neural network are adjusted to minimize the position error between the desired hub angle and the actual one. Finally the effectiveness of the proposed approach will be demonstrated by computer simulation.

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.136-146
• /
• 1992

This paper provides the end-point positioning of a single-link flexible robot arm by inverse dynamics. The system is composed of a flexible arm, the mobile ballscrew stage as an arm base, a DC servomotor as an actuator, and a computer. Actuator voltages required for the model of a flexible arm to follow a given tip trajectory are formulated on the basis of the Bermoullie-Euler beam theory and solved by applying the Laplace transform method, and computed by the numerical inversion method proposed by Weeks. The mobile stage as the arm base is shifted so that the end-point follows the desired trajectories. Then the trajectory of end-point is measured by the laser displacement sensor. Here, two kinds of functions are chosen for the given tip trajectories. One is what is called the bang-bang acceleration profile and the other is the Gaussian velocity profile.

• 소음진동
• /
• 제6권2호
• /
• pp.187-196
• /
• 1996

A new control strategy to actively control the vibration of a very flexible single link manipulator is proposed and experimentally realized. The control scheme consists of two actuators; a motor mounted at the beam hub and a piezoceramic bonded to the surface of the flexible link. The control torque of the motor to produce a desired angular motion is firstly determined by employing a sliding mode control theory on the equivalent rigid dynamics. The torque is then applied to the flexible manipulator in order to activate the commanded motion. During the motion, underirable oscillation is actively suppressed by applying a feedback control voltage to the piezoceramic actuator. Consequently, the desired tip position is favorably accomplished without vibration. Measured control responses are presented in order to demonstrate the efficiency of the proposed control methodology.

• 한국통신학회논문지
• /
• 제15권8호
• /
• pp.708-714
• /
• 1990

본 논문에서는 링크가 가볍고 유연한 로보트 매니퓰레이터에 대해 손의 끝점을 측정하여 기준 궤적을 추종하기 위한 자기 동조 제어기를 제안하고 컴퓨터 시뮬레이션을 통해 제안된 알고리듬의 성능을 입증하였다. 제어 대상으로 2개의 링크를 갖는 유연성 로보트 매니퓰레이터를 설정하고, 모델의 구성은 중력 작용이 포함된 가정 모드 형태 방법을 사용하여, 각 링크의 전동 모드를 2가지로 채택하여 동력학 방정식을 유도하였으며, 제어기는 공칭 토크를 가하는 동적 전향 보상기와 교정 토크를 가하는 자기 동조 궤환 제어기를 결합시킨 합성 제어기로 구성하였다.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.120-129
• /
• 2002

An integrated structure and controller design approach for rotating cantilever beam is presented. An optimization method is developed for improving positioning performance considering the elastic deformations during high speed rotation and adopting the beam shape and the control gains as design variables. For this end, a dynamic model is setup by the finite element method according to the shape of the beam. The mass and stiffness of the beam are distributed in such a way that the closed-loop poles of the control system should be located leftmost in the complex s-plane. For optimization method, the simulated annealing method is employed which has higher probability to find the global minimum than the gradient-based down-hill methods. Sequential design and simultaneous design methods are proposed to obtain the optimal shape and controller. Simulations are performed with new designs by the two methods to verify the effectiveness of the approach and the results show that the settling time is improved for point-to-point position controls.