• 대한조선학회논문집
• /
• 제29권1호
• /
• pp.29-42
• /
• 1992

Spade Type 타의 단독 특성을 추정하기 위하여 3차원 Panel Method를 사용하였다. 입사류는 균일하며 시간에 따라 변하지 않는다고 가정하였고, 타 표면에 쏘오스 및 다이폴을 분포하였다. 후류면은 타의 뒷날에서 물체로부터 떨어져 나간다고 가정하였으며, 후류면에는 다이폴을 분포하였다. 후류면은 물체의 뒷날과 무한 원방에서 적당한 조건을 부여함으로써 그 형상을 가정하였으며, 후류 형상의 차이가 최종 결과에 미치는 영향을 고찰하였다. 뒷날에서는 3차원 압력 Kutta 조건을 적용하였으며, 2차원 Kutta조건을 적용한 결과와 비교하여 보았다. Spade Type 타에 대한 계산을 수행하였으며, 실험 결과와 전반적으로 잘 일치함을 확인하였다. 본 연구에서 사용한 방법은 타의 초기 설계 단계에서 유용하게 사용할 수 있을 것이다.

• Macromolecular Research
• /
• 제10권4호
• /
• pp.187-193
• /
• 2002

Several methods have been used to synthesize polymer-clay nanocomposites. In-situ polymerization with clay belongs to a classical way to develop nano-structured materials, while melt intercalation is being recognized as another useful approach due to its versatility and environmentally benign character. In this research, we prepared polymer-clay nanocomposites based on the poly (methyl methacrylate) and organically modified montmorillonite via two-stage sonication process. According to the unique mode of power ultrasonic wave, the sonication during processing led to enhanced breakup of the clay agglomerates and reduction in size of the dispersed phase. Optimum conditions to form stable exfoliated nanocomposites were studied for various compositions and conditions. It was found that a novel attempt carried out in this study yielded further improvement in the mechanical performance of the nanocomposites compared to those produced by the conventional melt mixing process, as revealed by DMA, XRD and TEM. And rheological properties of nanocomposites were measured by ARES. As a result, sonicated PMMA-clay nanocomposites exhibits enhanced properties such as storage modulus and thermal stability than that of neat PMMA.

• 한국컴퓨터정보학회논문지
• /
• 제11권1호
• /
• pp.11-18
• /
• 2006

LAD(Logical Analysis of Data)는 Boolean-logic에 기반을 둔 데이터 마이닝 방법론이다. LAD에 의한 데이터 분석 시 중요한 과정은 데이터 집합에 숨겨진 구조적 정보를 패턴의 형식으로 발견해내는 패턴 생성 단계이다. 기존의 패턴 생성 방법은 열거법에 기반을 두고 있어 높은 차수의 패턴을 생성하는 것은 실질적으로 불가능하였다. 본 논문에서는 최적화에 기반을 둔 패턴 생성 방법론을 제안하고 혼합 정수 선형 모형과 SCP(Set Covering Problem)의 두 가지 모형을 제안한다. 기계학습 분야에서 널리 쓰이는 데이터 집합에 대해 제안된 패턴 생성 방법을 이용한 분석 실험을 통하여 기존의 패턴 생성 방법으로는 생성될 수 없는 패턴을 쉽게 생성하는 효율성을 입증하였다.

• 한국지능시스템학회논문지
• /
• 제22권5호
• /
• pp.577-582
• /
• 2012

이동통신망에서는 이동국에서 채널할당 요청이 있을 때 교환국에서 각 기지국에 속한 이동국에 채널을 할당한다. 채널을 할당하는 방식에는 고정채널할당방식과 동적채널할당방식이 있으며 이를 조합한 하이브리드방식이 주류를 이룬다. 주파수를 잘 할당한다는 것은 그만큼 자원을 효율적으로 사용하고 고객에게 양질의 서비스를 제공하는 길이기도 하다. 본 논문에서는 채널을 할당할 때 채널간 간섭을 최소로 하고 채널을 할당하기까지의 시간과 횟수를 최소화하는 방안을 적용한 방식을 제안한다. 이를 구현하기 위해 유전 알고리즘의 프로세서 단계인 검증단계를 통하여 재생산 단계를 거치므로 제안 방식의 정확성과 효율성을 나타낸다. 또한 시뮬레이션을 통해 다른 방식과 비교 검토하여 제안 방식의 효율성을 검증한다.

• Interaction and multiscale mechanics
• /
• 제6권2호
• /
• pp.237-255
• /
• 2013

In this paper, a meshfree-enriched finite element method (ME-FEM) is introduced for the large deformation analysis of nonlinear path-dependent problems involving contact. In linear ME-FEM, the element formulation is established by introducing a meshfree convex approximation into the linear triangular element in 2D and linear tetrahedron element in 3D along with an enriched meshfree node. In nonlinear formulation, the area-weighted smoothing scheme for deformation gradient is then developed in conjunction with the meshfree-enriched element interpolation functions to yield a discrete divergence-free property at the integration points, which is essential to enhance the stress calculation in the stage of plastic deformation. A modified variational formulation using the smoothed deformation gradient is developed for path-dependent material analysis. In the industrial metal forming problems, the mortar contact algorithm is implemented in the explicit formulation. Since the meshfree-enriched element shape functions are constructed using the meshfree convex approximation, they pose the desired Kronecker-delta property at the element edge thus requires no special treatments in the enforcement of essential boundary condition as well as the contact conditions. As a result, this approach can be easily incorporated into a conventional displacement-based finite element code. Two elasto-plastic problems are studied and the numerical results indicated that ME-FEM is capable of delivering a volumetric locking-free and pressure oscillation-free solutions for the large deformation problems in metal forming analysis.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.26-32
• /
• 2012

In the present study, the stencil printing process using solder paste are numerically analyzed. The key design parameters in the stencil printing process are the printing conditions, stencil design, and solder paste properties. Among these parameters, the effects of printing conditions including the squeegee angle and squeegee pressure are investigated through finite element (FE) analysis. However, the FE analysis for the stencil printing process requires tremendous computational loads and time because this process carries micro-filling through thousands of micro-apertures in stencil. To overcome this difficulty in simulation, the present study proposes a two-step approach to sequentially perform the global domain analysis and the local domain analysis. That is, the pressure development under the squeegee are firstly calculated in the full analysis domain through the global analysis. The filling stage of the solder paste into a micro-aperture is then analyzed in the local analysis domain based on the results of the preceding global analysis.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.59-63
• /
• 2007

We propose a controller design analysis for a cross-coupling control system, which is essential for achieving high contouring accuracy in multi-axis CNC systems. The proposed analysis combines three axial controllers for each individual feed drive system together with a cross-coupling controller at the beginning of the design stage in an integrated manner. These two types of controllers used to be separately designed and analyzed since they have different control objectives. The proposed scheme is based on a mathematical formulation of a three-dimensional contour error model and includes a stability analysis for the overall control system and a performance analysis in terms of contouring and tracking accuracy at steady state. A computer simulation was used to demonstrate the validity of the proposed methodology. The performance variation was investigated under different operating conditions and controller gains, and a design range was elicited that met the given performance specifications. The results provide basic guidelines in systematic and comprehensive controller designs for multi-axis CNC systems. A cross-coupling control system was also implemented on a PC-based three-axis CNC testbed, and the experimental results confirmed the usefulness of the proposed control system in terms of contouring accuracy.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.381-388
• /
• 2002

A series of centrifuge model tests were performed to investigate the behavior of piled bridge abutment subjected to lateral soil movements induced by the construction of approach embankment. In these tests, both the depth of soft clay and the rate of embankment construction are chosen as key parameters to examine the effects on lateral soil movements. The depth of soft clay layer varies from 5.2 m to 11.6 m, and the rate of embankment construction has two types of staged construction(1m/30days, 1m/15days) and instant construction. It is shown that, the distribution of lateral flow induced by stage embankment construction has a trapezoidal distribution. And practical guidelines to check the possibility of some lateral movement of piled abutment were investigated. The validity of the proposed guidelines by centrifuge test was compared with the observed performance by lateral movement index, F(Japan Highway Public Corporation) and modified I index(Korea Highway Corporation). Based on the results obtained, the critical values of F and modified I, as a practical guidelines, are proposed to 0.03 and 2.0, respectively.

• 디자인학연구
• /
• 제17권1호
• /
• pp.241-252
• /
• 2004

CAD는 이미 디자인 분야에서도 중요하게 사용되는 도구로 동시 공학적 프로세스 상에서 전통적인 디자인 방법은 점점 사라져 가고 있다. 하지만, 리버스 엔지니어링(Reverse Engineering) 방식의 CAD 도구는 디자이너들의 작업을 위해 사용하는 도구로는 아직 많은 문제점들을 가지고 있다. 특히 디자인 프로세스 초기 단계의 직관적인 작업의 특성으로 인해 디자이너들이 기존의 CAD 도구들을 이 단계에서 적용하기는 거의 불가능하다. 최근 이러한 정성적인 문제들에 대해 구체적으로 접근하려는 연구들이 소프트웨어 뿐 아니라 하드웨어적 측면에서도 이루어지고 있다. 이 글에서는 디자인 프로세스 상에서 사용되는 기존의 3D CAD 도구의 문제점들과 최근 연구되고 있는 새로운 인터페이스 접근 방법들에 대해 알아보았다. 또한 디자이너들을 위한 CAD 개발을 위한 가이드라인을 제시하고 이를 통해 유비쿼터스 컴퓨팅 환경에서 효율적으로 사용할 수 있는 디자인 도구를 개발하기 위한 방안을 제시하였다.

• Journal of Information Processing Systems
• /
• 제13권4호
• /
• pp.914-927
• /
• 2017

Weighted network link prediction is a challenge issue in complex network analysis. Unsupervised methods based on local structure are widely used to handle the predictive task. However, the results are still far from satisfied as major literatures neglect two important points: common neighbors produce different influence on potential links; weighted values associated with links in local structure are also different. In this paper, we adapt an effective link prediction model-local naive Bayes model into a weighted scenario to address this issue. Correspondingly, we propose a weighted local naive Bayes (WLNB) probabilistic link prediction framework. The main contribution here is that a weighted cluster coefficient has been incorporated, allowing our model to inference the weighted contribution in the predicting stage. In addition, WLNB can extensively be applied to several classic similarity metrics. We evaluate WLNB on different kinds of real-world weighted datasets. Experimental results show that our proposed approach performs better (by AUC and Prec) than several alternative methods for link prediction in weighted complex networks.