• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.322-325
• /
• 2007

This paper suggests a non-contact sensor for measuring bending vibration of a non-metallic cylinder in two orthogonal directions simultaneously. Recent research shows that a solenoid can pick up bending vibrations of a nonmetallic cylinder based on the reversed Lorentz force mechanism if an electrical conductive patch is attached to the cylinder. In this work, pairs of specially designed patches are used to make two independent paths for the current induced by bending vibrations, which enables the measurement of bending vibrations along two orthogonal directions simultaneously. The working performance of the developed sensor was verified by using two accelerometers.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.381-385
• /
• 2008

This paper suggests a non-contact sensor for measuring bending vibration of a non-metallic cylinder in two orthogonal directions simultaneously. Recent research shows that a solenoid can pick up bending vibrations of a nonmetallic cylinder based on the reversed Lorentz force mechanism if an electrically conductive patch is attached to the cylinder. In this work, pairs of specially designed patches are used to make two independent paths for the current induced by bending vibrations, which enables the measurement of bending vibrations along two orthogonal directions simultaneously. The working performance of the developed sensor was verified by using two accelerometers.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1755-1760
• /
• 2004

The holographic velocimetry system has a significant potential for the measurements of three dimensional velocities of particles. In this study, orthogonal two-side holography system was developed to obtain three dimensional velocities and sizes of spray droplets. To get high quality of reconstructed images, singe-exposure holography at two time moments and two orthogonal sides was adopted instead of multi-exposure, single-side holography. From three dimensional positions of droplets determined by reconstruction and image processing system, the three dimensional velocities and sizes of each droplet was extracted using the PTV algorithm. To determine the position of particles in the optical axis, a new focusing parameter was introduced based on the correlation between two droplet images at the same distance. The measured results by holography system were compared with those by the PDPA.

• 한국소음진동공학회논문집
• /
• 제22권9호
• /
• pp.903-909
• /
• 2012

In elliptical vibration cutting(EVC) where the cutting tool traces a micro-scale 2-dimensional elliptical trajectory, the kinematical and vibrational characteristics of the EVC device greatly affect cutting performance. In this study, kinematical and vibrational characteristics of an EVC device constructed with two orthogonally-arranged stacked piezoelectric actuators were investigated both analytically and experimentally. The step voltage was applied to the orthogonal EVC device and the associated displacements of the cutting tool were measured to assess kinematical characteristics of the orthogonal EVC device. To investigate the vibrational characteristic of the orthogonal EVC, sinusoidal voltage was applied to the EVC device and the resulting displacements were measured. It was found from experiments that coupling of displacements in the thrust and cutting directions and the tilt of the major axis of the elliptical trajectory exists. In addition, as the excitation frequency is in vicinity of resonant frequencies the distortion in the shape of the elliptical trajectory becomes greater and change in the rotation direction occurs. To correct the shape distortion of the elliptical trajectory, the shape correcting procedure developed for the parallel EVC device was applied for the orthogonal EVC device and it was shown that the shape correcting method successfully corrects distortion.

• Journal of information and communication convergence engineering
• /
• 제19권3호
• /
• pp.131-135
• /
• 2021

The interference between closely placed co-coverage satellites was analyzed. In general, a satellite network may use different orthogonal polarizations and frequencies to increase the throughput of a satellite. However, when orthogonal linear polarization (horizontal polarization and vertical polarization) or orthogonal circular polarization (left-handed circular polarization and right-handed circular polarization) is used, the signal from one polarization sense to another may be coupled, resulting in cross-polarization interference. This signal-coupling arises due to the finite value of the cross-polarization discrimination of the earth station. In this study, field equations were used to analyze the interference between adjacent satellites using co-frequency. The level of interference was compared to that when two adjacent satellites used the same polarization. The simulation results show that the interference mainly depends on the off-axis co-polar pattern and the cross-polar pattern of the earth station antenna.

• 한국항해항만학회지
• /
• 제30권9호
• /
• pp.729-734
• /
• 2006

The authors aim to establish the theory necessary for developing the free gyroscopic compass and focus on mainly two points. One is to suggest north-finding principle by the angular velocity of the earth's rotation, and the other is to suggest orthogonal coordinate transformations of the motion rate of the spin axis, which transforms the components of motion rate in the free gyro frame into those in the platform frame and that this transformed rate is, in turn, transformed into the NED(north-east-down) navigation frame. Subsequently, ship's heading is obtained by using the fore-aft and athwartship components of the motion rate of the spin axis in the NED frame. In addition it was found how to solve the transformation matrix necessary for transforming each frame.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.533-541
• /
• 2017

This paper presents a novel Parameter-Independent Fictive-Axis (PIFA) approach for the Voltage-Oriented Control (VOC) algorithm used in grid-tied single-phase inverters. VOC is based on the transformation of the single-phase grid current into the synchronous reference frame. As a result, an orthogonal current signal is needed. Traditionally, this signal has been obtained from fixed time delays, digital filters or a Hilbert transformation. Nevertheless, these solutions present stability and transient drawbacks. Recently, the Fictive Axis Emulation (FAE) VOC has emerged as an alternative for the generation of the quadrature current signal. FAE requires detailed information of the grid current filter along with its transfer function for signal creation. When the transfer function is not accurate, the direct and quadrature current components present steady-state oscillations as the fictive two-phase system becomes unbalanced. Moreover, the digital implementation of the transfer function imposes an additional computing burden on the VOC. The PIFA VOC presented in this paper, takes advantage of the reference current to create the required orthogonal current, which effectively eliminates the need for the filter transfer function. Moreover, the fictive signal amplitude and phase do not change with a frequency drift, which results in an increased reliability. This yields a fast, linear and stable system that can be installed without fine tuning. To demonstrate the good performance of the PIFA VOC, simulation and experimental results are presented.

• 한국기계가공학회지
• /
• 제19권8호
• /
• pp.81-87
• /
• 2020

A stable rotational-to-linear motion transformation structure using a driving mechanism with 2 degrees of freedom was developed for an orthogonal mechanism to prevent the interference of each axis in 2D motion. In this mechanism, a step motor was used for precise position control. This structure was developed to maneuver workparts in micro particle blast machining experiments. To determine the real-time performance of micro particle blast machining, the control, input, and output were operated simultaneously and precise position control was implemented, using a timer interrupt with multiple execution codes. The two step motors obtained precise position control by removing backlash with a ball-screw mechanism. The device has menu-type control codes for user-friendliness, and real-time sequence control was simultaneously adopted for user control input.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.395-400
• /
• 1991

In spinning satellite, a gyrotorquer generates a control torquer along two orthogonal axes normal to the spin axis of the vehicle. Matrix Fraction Description(MFD) are used to obtain minimal realization of the transfer matrix relating the attitude angles and the rate of rotation of the gimbals of gyrotorquer. In this paper, the Linear Quadratic Gaussian with Loop Transfer Recovery and H.meihodologies are used to design controller for spinning satellite.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.161-166
• /
• 1997

A improved method to measure the wavefront aberration of aspheric lens is described. In this study, which is a kind of lateral shearing interferometry, a sinusoidal diffraction grating is used for better quality of interferogram. Also,the grating is inclined to horizontal axis for obtaining the two orthogonal derivatives and minimizing moving error simultaneously. Measurement result shows that the repeatability is about 6 times better then that of previouse Ronchi Test.