Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Proposition of Copper - Foil Magnetic Sensor for the Two-axis Remote Measurement of Bending Vibration of a Non-metallic Cylinder

비금속 배관에서의 원격 2축 굽힘 진동 측정을 위한 동박 패치형 자기 센서의 제안

  • 김진기 (메디슨 프로브연구소 개발팀) ;
  • 한순우 (한국철도기술연구원) ;
  • 김윤영 (서울대학교 기계항공공학부)
  • Published : 2008.04.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper suggests a non-contact sensor for measuring bending vibration of a non-metallic cylinder in two orthogonal directions simultaneously. Recent research shows that a solenoid can pick up bending vibrations of a nonmetallic cylinder based on the reversed Lorentz force mechanism if an electrically conductive patch is attached to the cylinder. In this work, pairs of specially designed patches are used to make two independent paths for the current induced by bending vibrations, which enables the measurement of bending vibrations along two orthogonal directions simultaneously. The working performance of the developed sensor was verified by using two accelerometers.

Keywords

References

  1. Rothberg, S. J. and Bell, J., 2004, 'On the Application of Laser Vibrometry to Translational and Rotational Vibration Measurements on Rotating Shafts', Measurement, Vol. 35, pp. 201-210 https://doi.org/10.1016/j.measurement.2003.04.001
  2. Areny, R. P. and Webster, J. G., 2001, Sensors and Signal Conditioning, Wiley-Inter Science, New York
  3. Kwun, H. and Teller, C. M., 1994, 'Magnetostrictive Generation and Detection of Longitudinal, Torsional and Flexural Waves in a Steel Rod', J. Acoust. Soc. Am., Vol. 96, No. 2, pp. 1202-1204 https://doi.org/10.1121/1.411391
  4. Jiles, D. C., 1995, 'Theory of the Magnetomechanical Effect', J. Phys. D: Appl. Phys., Vol. 28, pp. 1537-1546 https://doi.org/10.1088/0022-3727/28/8/001
  5. Kim, S. K., Lee, J. N., Han, S. W., Chung, T. J., Lee, S. Y. and Jang, K. W., 2007, 'Vibration Measurement of an Automobile Exhaust System in Operation', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 17, No. 3, pp. 235-240 https://doi.org/10.5050/KSNVN.2007.17.3.235
  6. Han, S. W. and Kim, Y. Y., 2006, 'Magnetic Sensor for the Noncontact Measurement of Flexural Vibrations of a Nonferromagnetic Metallic Hollow Cylinder', Rev. Sci. Instrum., Vol. 77, pp. 085105-085109 https://doi.org/10.1063/1.2239037
  7. Han, S. W., 2005, Development and Application of Magnetic Sensor for the Non-contact Measurement of Bending Vibration, Ph. D. Thesis, Seoul National University
  8. Han, S. W., Bang, Y. B. and Kim, Y. Y., 2006, 'Metal foil Method for Noncontact Measurement of Lateral Vibrations of a Nonmetallic Cylinder by a Solenoid', Appl. Phys. Lett., Vol. 89, pp. 141905-141907 https://doi.org/10.1063/1.2358208
  9. Johnson, D., 2007, 'Proximity Sensors', Control Engineering, Vol. 54, No. 7, pp. 92-97.
  10. Hirao, M. and Ogi, H., 2003, EMATS for Science and Industry, Kluwer Academic Pub., Dordrecht
  11. Ewins, D. J., 2000, Modal Testing, 2nd ed., Research Studies, Baldock, pp. 422-437