• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.10
• /
• pp.850-857
• /
• 2013

Turbo equalizer system is a method which can improve performance through a combination of the equalizer and decoder. The turbo equalizer has been mainly used a MAP equalizer. However, this turbo equalizer has a disadvantage that has a high computational complexity. To overcome the disadvantage and to improve efficiency of bandwidth, blind turbo equalization system is proposed. blind turbo equalization system has low equalization performance than conventional turbo equalization system. To circumvent this problem, we adapt the beamforming method based on the MUSIC algorithm. we confirmed that the proposed method improves the equalization performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.28-38
• /
• 2013

In this paper, we propose a improved turbo equalizer which generates a feedback signal through a simple calculation to improve performance in single carrier system with the LMS(least mean square) algorithm based equalizer and LDPC(low density parity check) codes. LDPC codes can approach the Shannon limit performance closely. However, computational complexity of LDPC codes is greatly increased by increasing the repetition of the LDPC codes and using a long parity check matrix in harsh environments. Turbo equalization based on LDPC code is used for improvement of system performance. In this system, there is a disadvantage of very large amount of computation due to the increase of the repetition number. To less down the amount of this complicated calculation, The proposed improved turbo equalizer adjusts the adoptive equalizer after the soft decision and the LDPC code. Through the simulation results, it's confirmed that performance of improved turbo equalizer is close to the SISO-MMSE(soft input soft output minimum mean square error) turbo equalizer based on LDPC code with the smaller amount of calculation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1525-1530
• /
• 2015

In this paper, We analyzed the performance of turbo equalizer using turbo codes thorough the under water experiment. To compensate the distorted signal induced by multipath effect, we apply the iterative turbo codes that iteratively exchange probabilistic information between LMS-DFE and turbo decoder, thereby reducing the error rates significantly. We showed the successful of turbo decoding of iterative turbo equalizer is 93%.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1132-1136
• /
• 2005

In this paper, adaptive equalizer receiver for a turbo code direct sequence code division multiple access (DSCDMA) by using least mean square (LMS) adaptive algorithm is presented. The proposed adaptive equalizer is using soft output of decision feedback adaptive equalizer (DFE) to examines the output of the equalizer and the Log- maximum a posteriori (Log-MAP) algorithm for the turbo decoding process of the system. The objective of the proposed equalizer is to minimize the bit error rate (BER) of the data due to the disturbances of noise and intersymbol interference (ISI)phenomenon on the channel of the DS-CDMA digital communication system. The computer program simulation results shown that the proposed soft output decision feedback adaptive equalizer provides a good BER than the others one such as conventional adaptive equalizer, infinite impulse response adaptive equalizer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6B
• /
• pp.1068-1073
• /
• 2000

In this paper, we propose a serially concatenated turbo bode/turbo equalizer scheme for optical storage systems. Without modulation coding, a random data sequence is directly passed through the optical channel. In simulation, the channel includes jitter of 15% and AWGN. The densities of the channel are S=4.6 and S=7.0. The code rates of turbo code are 4/5, 8/9 and 16/17. All code rates, the bit error probability is less than 10-5 at 24dB when we and jitter of 15%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.303-310
• /
• 2013

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. In order to improve the performance, it is necessary to employ an iterative coding scheme. Among the iterative coding scheme, turbo codes and LDPC codes are dominant channel coding schemes in recent. This paper concluded that turbo coding scheme is optimal for underwater communications system in aspect to performance, coded word length, and equalizer combining. Also, we confirmed the performance in the environment of oceanic experimentation using turbo equalizer based on distance 5Km, data rate 1Kbps.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.7-17
• /
• 2015

In this paper, we propose a single antenna SSD(simultaneous single band duplex) system using turbo equalizer. The proposed system communicates simultaneously on single band. That is the proposed system is full-duplex system. The proposed system uses balanced feed network circuit to improve isolation in single antenna structure. Also, the proposed system uses RF(radio frequency) cancellation and digital cancellation to cancel self-interference. Additionally, the proposed system uses turbo equalizer to equalize ISI(inter-symbol interference) by harsh multipath fading and to collect bit errors by residual self-interference signals. By using turbo equalizer, the proposed system guarantees QoS(quality of service). In this paper, we uses Simulink simulation program to analyze performance of the proposed system. The simulation results confirm that proposed system can communicate simultaneously by using balanced feed network, RF cancellation, digital cancellation and turbo equalizer in harsh multipath channel on single band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.1
• /
• pp.28-35
• /
• 2014

In this paper, we propose a SSD(simultaneous single band duplex) system with turbo equalizer for full-duplex over harsh ISI(inter symbol interference) channel. The proposed system uses RF(radio frequency) cancellation and digital cancellation to cancel self-interference caused by simultaneous single band duplex communication. Also, using turbo equalizer, the proposed system equalizes signal after digital cancellation. In this paper, we design SSD system with turbo equalizer. And then we evaluate BER(bit error rate) performance of the proposed system comparison with SSD system with adaptive equalizer. We use simulink program to confirm BER performance of the proposed system. The simulation results shows that the proposed system equalizes received signal effectively over harsh ISI channel and BER performance of the proposed system is better than BER performance of SSD system with adaptive equalizer.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.281-282
• /
• 2008

Turbo equalizers which use MAP (maximum a posteriori probability) equalizer or MMSE (minimum mean square error) equalizer have shown high performance and adoptability [1], [2]. In this paper, we show that the BP (belief propagation) algorithm can also be applied in equalizer and when it is connected with channel code, it can replace the MAP equalizer with similar complexity and performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.26-32
• /
• 2014

Single-Carrier Frequency division multiplexing (SC-FDM) has been selected for the uplink transmission technique in 3GPP-LTE since it has an advantage of low peak-to-average power ratio (PAPR) in user's perspective. The receiver typically uses a frequency domain equalizer, which, however, suffers from noise boost and/or residual ISI especially when the channel has deep nulls. In this paper, we propose using turbo equalizer to mitigate such a problem. We provide link level performance comparison and an insight into how many iteration is needed for reasonable performance and complexity.