• Journal of the Korean earth science society
• /
• v.42 no.5
• /
• pp.571-587
• /
• 2021

This study aims to investigate the problem recognition and clue capture processes of the observation stage in a geological field trip using abductive inquiry. To this end, eight outdoor geological programs were developed in the order of diagnostic evaluation, outdoor geological fieldwork, and review. Six middle-school students participated in these programs The geological field trip was conducted twice, followed by data provision, observation, rule generation, hypothesis generation, and final hypothesis presentation. Outdoor geological fieldwork recordings and student activity sheets were collected and analyzed qualitatively. From these data, three aspects of student observations emerged during the geological fieldwork: The characteristics of each pattern were subdivided into the geological importance of the clues, attention, type of clues, observation characteristics (attention factor), clue utilization, and clue deletion. Here, by combining these results, we propose educational applications that correspond to each aspect.

• Journal of the Korean housing association
• /
• v.15 no.6
• /
• pp.47-56
• /
• 2004

In the North-eastern districts of China, Northern races inherited and developed their own cultural traditions. The housing of northeastern China has been changed under the influence of environment. Some tribes' housings has been developed, keeping their own peculiar style, while others have divested of their ethnic flavor. To understand these aspects of development, this study focused on the housings in Heilongjiang and Nei Monggol. As for the procedure, this study referred to the literature and carried out a field trip at the same time. The housing of northeastern China has undergone the process to fix their residence after the life of migration in common. In this process, northeastern hosing has changed variously and can be grouped into the several types by shape and material. From the point of view about living pattern, some important living features are extracted by the types.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1385-1387
• /
• 2004

This paper presents a modelling methodology using fuzzy logic and train performance simulation for determining an economical running pattern for a high speed train which minimizes energy consumption under an given trip margin. The economical running pattern is defined with an economical maximum speed in traction phase, a speed at the end of coasting. As a case study, the simulation is carried out for an economical run of korea high speed train prototype, and the results of fuzzy model described.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1132-1137
• /
• 2008

Automatic Operation based on ATO (Automatic Train Operation) is necessary for driverless Light Rail Transit business. When this kind of driverless LRT operation plan is made, TPS (Train Performance Simulation) is traditionally simulated at all-out mode and coasting mode based on manual operation. Commercial schedule speed equals to all-out speed minus $9{\sim}15%$ make-up margin. Coasting mode TPS simulation is also run at commercial schedule speed to calculate run time and energy consumption. But TPS based on manual operation should make an improvement on accuracy in case of driverless LRT operation Plan. In this paper, new fast mode TPS simulation using ATO pattern is proposed and show near actual ATO result. The actual ATO pattern can be accurately simulated with the introduction of 4 parameters such as commercial braking rate, jerk, station stop profile and grade converted distance. Normal mode TPS simulation for commercial schedule speed can be designed to have fast mode trip time plus 3 seconds/km margin recommended by korean standard LRT specification.

• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.393-404
• /
• 2015

Gravity model has had the major problem that the model explains the characteristics of travel behavior with only deterrence factors such as travel time or cost. In modern society, travel behavior can be affected not only deterrence factors but also zonal characteristics or transportation service. Therefore, those features have to be considered to estimate the future travel demand accurately. In this regard, there are two primary aims of this study: 1. to identify the characteristics of inter-zonal travel, 2. to develop the new type of calibration method. By employing accessibility variable which can explain the manifold pattern of trip, we define the zonal travel behavior newly. Furthermore, we suggest 2-phase calibration method, since existing calibration method cannot find the optimum solution when organizing the deterrence function with the new variables. The new method proceeds with 2 steps; step 1.estimating deterrence parameter, step 2. finding balancing factors. The validation results with RMSE, E-norm, C.R show that this study model explains the inter-zonal travel pattern adequately and estimate the O/D pairs precisely than existing gravity model. Especially, the problem with estimation of short distance trip is overcomed. In conclusion, it is possible to draw the conclusion that this study suggests the possibility of improvement for trip distribution model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.52-60
• /
• 2018

In the automobile industry, in order to increase the fuel efficiency and conform to the safety regulations, it is necessary to make the vehicles as light as possible. Therefore, it is crucial to manufacture dual phase steels, complex phases steels, MS steels, TRIP steels, and TWIP from high strength steels with a tensile strength of 700Mpa or more. In order to apply ultra-high tensile strength steel to the body, the welding process is essential. Resistance spot welding, which is advantageous in terms of its cost, is used in more than 80% of cases in body welding. It is generally accepted that ultra-high tensile strength steel has poor weldability, because its alloy element content is increased to improve its strength. In the case of the resistance spot welding of ultra-high tensile steel, it has been reported that the proper welding condition area is reduced and interfacial fracture and partial interfacial fracture occur in the weld zone. Therefore, research into the welding quality judgment that can predict the defect and quality in real time is being actively conducted. In this study, the dynamic resistance of the weld was monitored using the secondary circuit process variables detected during resistance spot welding, and the factors necessary for the determination of the welding quality were extracted from the dynamic resistance pattern. The correlations between the extracted factors and the weld quality were analyzed and a regression analysis was carried out using highly correlated pendulums. Based on this research, a regression model that can be applied to the field was proposed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.4
• /
• pp.60-67
• /
• 2012

Most of a driving cycle is used to measure fuel consumption (FC) and emissions for a specified vehicle. A driving cycle was reflected geography and traffic characteristics for each country, also, driving pattern is affected these parameters such as vehicle dynamics, FC and emissions. Therefore, this study is an attempt to develop a driving cycle for military operational area. The proposed methodology the driving cycle using micro-trips extracted from real-world data. The methodology is that the driving cycle is constructed considering important parameters to be affected FC. Therefore, this approach is expected to be a better representation of heterogeneous traffic behavior. The driving cycle for the military operational area is constructed using the proposed methodology and is compared with real-world driving data. The running time and total distance of the final cycle is 1461 s, 13.10 km. The average velocity is 32.25 km/h and average grade is 0.43%. The Fuel economy in the final cycle is 5.93 km/l, as opposed to 6.10 km/l for real-world driving. There were about 3% differences in driving pattern between the final driving cycle and real-world driving.

• Journal of Korean Society of Transportation
• /
• v.11 no.1
• /
• pp.5-22
• /
• 1993

This study examines the 1980 Census and the 1987 Travel Survey data sets, in order to identify commuting trends in the Seoul Metropolitan Area. The commuting field of Seoul includes the cities and counties contiguous to Seoul, as well as Inchon, Suwon and Ansan City and Paju County. The study finds little support for the expansion of the commuting field toward distant counties of Kyonggi Province; instead an intensification of commuting within the field is more salient. The most prominent trend, within the city limit of Seoul, is that journey-to-work toward the city center has decreased whereas peripheral journeys increased considerably. The work trips have increased most in the southwestern sector of the city; a moderate increase in the northeastern and southwestern sectors; and decreases in the center and the northwestern sector of the city. Factorial analyses of the work trip data also reveal the emergence of sub-regions of journey-to-work in the peripheries of the city. Such a spatial pattern of commuting changes resemble that of population changes, and correspond in part to the layout of the subway system.

• Journal of Korean Society of Transportation
• /
• v.1 no.1
• /
• pp.48-55
• /
• 1983

One of the major objectives of a transportation study is to provide the transportation networks for future years in order to accommodate the projected transport demand for the movement of passengers and goods utilizing the optimum "mix" of modes. To achieve this goal, the planning process starts with collection and analysis of data to determine the existing traffic demand and travel pattern, and to assign the future trip interchanges on th existing and planned networks to determine areas of improvements so that it can cope with increasing future traval demand. The purpose of this paper attempts to explain the public transport network formulation techniques which can be easily applied to the large urban area multi modal public transport system.

• Transactions of Materials Processing
• /
• v.10 no.6
• /
• pp.465-470
• /
• 2001

Hole flanging experiments are performed on flat circular plates with a hole in the center and the flangeability and fracture behaviors of TRIP steels and ferrite-Bainite duplex steels were examined. In the hole flanging, deformation by lip and petalling occurs when plates are struck by punches of various shapes and high circumferential strains induced in the target material cause radial cracking and the subsequent rotation of the affected plate material in a number of symmetric petals. In all cases, failure of the plate was due to lip fracture that results from multiple localized neckings that take place around the hole periphery where straining is most severe and a somewhat regular pattern was observed in a fracture shape. The neck characteristics in flange formation and the transition from the lip to petal mode at which fracture occurs were compared with two materials.